Shop for all in Measuring equipment repair and maintenance

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-04 printed on the original buttons. Not compatible with other brands or models. FEATURES: - High

AVAILABILITY: This item is usually dispatched same day Replacement square style button for Myzox level staves. These spring loaded locking buttons are a direct replacement for Myzox level staves with MG-02 or MG-02A printed on the original buttons. Not compatible with other brands or models. FEATURE

Availability: This item is usually despatched same day Connect your Forerunner 405/310XT to this charging clip, which has a USB plug for convenient charging of your watch via your computer. FEATURES: - Standard USB Plug

AVAILABILITY: This item is usually dispatched same day This is a clearance product with limited stock available. An economy priced 6 section, 7.6 meter telescopic fibreglass staff with surveyors E-Face 10mm graduation and a height scale on the back. Constructed from tough, rigid fibreglass with rein

AVAILABILITY: This item is usually dispatched same day The Leica Style GMP111-0 is a zero constant mini prism, mounted in polymer holder with 1/4" thread fittings. With an in-built circular bubble, the set comes complete with a four-section pole and point that expand your surveying capabilities. INC

AVAILABILITY: This item is usually dispatched same day Stainless steel adapter, M8 male thread to standard survey male 5/8x11. FEATURES: - Stainless steel SPECIFICATIONS: - Lower thread: 8mm male - Upper thread: 5/8x11 male - Construction: Stainless Steel - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day With all the features of GMEs AccuSat MT610G, but with the addition of "Return Link Service". This service allows the PLB user to receive a confirmation signal back after their distress alert has been received and their location has been detecte

AVAILABILITY: This item is usually dispatched same day Replacement Topcon Legs (sold individually) for TP-L3, TP-L4, TP-L5 and TP-L6 models. Each foot is machined metal with a rubber end cap for grip and stability. Available to suite 150, 200, 250 and 300mm pipe centring. FEATURES: - Enables precise

AVAILABILITY: This item is usually dispatched same day Replacement Li-Ion Battery for Nedo X-Liner 3D laser levels (also suits a number of other brands and models). FEATURES: - 7.4V - 2,600 mAh SPECIFICATIONS: - Suits models: - Nedo: X-Liner 3DR - Huepar: 603CG / 603CR / 602CG / 602CR - Spot-on: Las

AVAILABILITY: This item is usually dispatched same day Replacement mains AC/DC power adapter for Spot-on Powerline 3DR MKII / 3DG model laser levels. FEATURES: - Plug-in wall power supply SPECIFICATIONS: - Suits: Spot-on Powerline 3DR MKII / 3DG - Input: 100-240V~, 50-60Hz - Output: 5V DC, 2000mA -

AVAILABILITY: This item is usually dispatched same day Replacement battery charger for Stonex R15/R35 total stations. FEATURES: - High quality plug-in wall charger SPECIFICATIONS: - Suits Models: Stonex R15 R35 - Input: 100-240V~, 50-60Hz - Output: 8.4V DC, 2A - Wall plug: NZ/Australia - Warranty: 9

AVAILABILITY: This item is usually dispatched in 2-3 days Pair of genuine GE Protimeter BLD5070 EIFS Probe replacement screw in needles. SPECIFICATIONS: - Total Length: 130mm - Tip to base of shaft: 110mm

AVAILABILITY: This item is usually dispatched same day Make installing track, lighting and ceilings easier and more accurate by attaching your X-Liner laser directly to the wall. If the work site is just too busy to risk your laser getting knocked over, then just put it up on the wall out of harms w

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This set is ex-demo and in near new condition. AVAILABILITY: This item is usually dispatched same day The Trilex GC100 2D Grade Control system uses your laser to give level or grade to pro

AVAILABILITY: This item is usually dispatched same day No more bending down to mark the ground. This handy applicator wand lets you apply paint at the squeeze of the trigger. Fits all Spraywell 400ml cans. Simply insert the can into the wand, point at the ground and pull the trigger. FEATURES: - Fit

AVAILABILITY: This item is usually dispatched same day. The S590 is a versatile GNSS receiver featuring a multi-constellation system that supports GPS, GLONASS, BeiDou, Galileo, QZSS, and IRNSS, with advanced PPP correction services available. It delivers centimeter-level accuracy through sophistica

Download Brochure AVAILABILITY: This item is usually dispatched same day. The S80G is a GNSS system that offers a range of features and capabilities for efficient data and photo collection in the field. It is a multi-constellation system, meaning it can utilize signals from multiple satellite netwo

AVAILABILITY: This item is usually dispatched in 1 to 2 days Topcon original rechargeable battery pack for RL-H4C, RL-SV1S and RL-SV2S Laser Levels. FEATURES: - Topcon Factory original SPECIFICATIONS: - Compatible with: Topcon RL-H4C, RL-SV1S and RL-SV2S models - Charger: AD-17 (sold seperately) - T

USED EQUIPMENT: All used equipment offered by Trig Instruments has been serviced and carries a 90 day warranty. This pole is in very good condition. Male 5/8 x 11 thread on one end and female on the other, this prism height adapter allows a GPS pole to be used with a 360 Prism. You can also improve

AVAILABILITY: This item is usually dispatched same day Telescopic 1.85m aluminium pole with locking button, for GPS GNSS whip antenna. FEATURES: - Strong locking button - 1.85m extension (to bottom of thread) - Male 5/8 thread on the top and female 5/8 thread on the bottom - Includes a carry bag SPE

AVAILABILITY: This item is usually dispatched same day Replacement pair of Pole mounting clamps for the Trilex MMR Machine Mounted Laser Receiver. FEATURES: - Easy to Install SPECIFICATIONS: - Suits: Trilex MMR and many similar receivers - Fits Pole Diameter: 10-50mm - Warranty: 12 months

AVAILABILITY: This item is usually dispatched same day The GME HS010 Headset is tailored for GME handheld UHF radios, providing reliable and clear communication. Its comfortable earpiece fits securely for long-term wear without irritation. Featuring a swivel connector, it offers versatile handling.

Download Free forms to print Download Free page patterns to print AVAILABILITY: This item is usually dispatched same day Want to try out the popular Rite in The Rain 8512 copy paper Now you can with this 10 sheet sample pack. Once you fall in love with this versatile water resistant paper, click he

AVAILABILITY: This item is usually dispatched same day Replacement metal washer for Bipod feet. Fits the foot of Seco and many other brands of Bipod. FEATURES: - Solid metal - Easy-to-replace SPECIFICATIONS: - Outer Diameter: 64mm - Inner hole: 16mm - Warranty: 12 months