Shop for all in Machine tool and part

- $75.40 Price range: $75.40 through MICRO GRAIN SOLID CARBIDE -Chamfering angle 90 inclusive or 60 inclusive on request -A 4-flute chamfer tool is highly effective for deburring, edge breaking, and chamfering in CNC machining -Can be used for chamfering, countersinking, deburring, and V-grooving -T...

- $30.00 .00 Price range: $30.00 through .00 MICRO GRAIN CARBIDE -30 Helix Angle to promote rapid chip evacuation. -Rolled point. 140 Point angle, strong tapered flute core. -Short Length. Tap drill sizes. -Advanced material and geometry. -More rigid design for improved drill accuracy.

- $49.01 Price range: $49.01 through MICRO GRAIN CARBIDE -Widely used on materials such as Plexiglass and Perspex. -The straight flute is preferred where the workpiece is fairly rigid. -Excellent for routing harder materials that require a fine finish. -4 flutes offers faster cutting. -Smooth Runnin...

$45.00

$80.00 .00 Price range: $80.00 through .00 MICRO GRAIN CARBIDE -Coating available on request. -Perfectly balanced, high speed, high feed. -All-in-one stock removal and finishing tool, cut and polish in one cut. -Especially designed for milling, excellent tool for soft, flexible materials like Alumin...

$125.60 0 Price range: $125.60 through 0

- $68.20 Price range: $68.20 through MICRO GRAIN CARBIDE -20 Helix Angle -Excellent tool for cutting a wide range of woods including plywood and MDF -Centre Cutting -The upcut geometry puuls chips away from the cutting surface, preventing clogging and reducing heat buildup. -This is especially usefu...

- $54.99 0 Price range: $54.99 through 0 MICRO GRAIN CARBIDE -20 Left hand Helix Angle, right hand cut, centre cutting front -Excellent tool for cutting pherolic, various plastics. soft woods and hard woods -The left hand helix directs the cutting force downwards effectively holding the material rig...

- $68.20 Price range: $68.20 through MICRO GRAIN CARBIDE -20 Helix Angle -Excellent tool for cutting a wide range of woods including plywood and MDF -Centre Cutting

- $78.30 0 Price range: $78.30 through 0 MICRO GRAIN CARBIDE -20 Left hand Helix Angle, right hand cut, centre cutting front -Excellent tool for cutting pherolic, various plastics wood -The left hand helix directs the cutting force downwards effectively holding the material rigidly in place and elim...

- $76.30 0 Price range: $76.30 through 0 MICRO GRAIN CARBIDE -Down cut -7 Left hand Helix Angle, right hand cutting, chip breaking function. -Suitable for most composite materials. Handles higher feeds well. -Excellent for cutting finishing superwood fibre glass -Ideally suited to cut: ABS, MDF, Acr...

- $58.40 Price range: $58.40 through MICRO GRAIN CARBIDE -2 flute groove cutter with 60 or 90 included angle -Used for sign-making and engraving, inlays and decorative panel designs -Suitable for soft mayerials that are prone to chipping (e.g. MDF, plywod, plastic) -Suitable for 3D carving and pocke...

- $58.40 Price range: $58.40 through MICRO GRAIN CARBIDE -2 flute groove cutter with 60 or 90 included angle -Used for signwork, chamfering, grooving, lettering and scoring panel design.

- $120.32 0 Price range: $120.32 through 0 MICRO GRAIN CARBIDE -Especially designed for cutting low and high density foam materials at high speeds -25 Helix Angle -Suitable for high speed machining -3D forming, deep pocket milling and profiling for foam.

- $340.00 MICRO GRAIN CARBIDE -Pilot cut sizes available 3.2mm, 4.5mm and 6mm with back Radius -R3.0 Radius -Tool designed to combine multiple operations into one, reducing tool changes and cycle times. -Design geometry ensures clean, precise cuts with minimal fraying or tearing -Combining Three Ope...

- $150.00 .00 Price range: $150.00 through .00 MICRO GRAIN CARBIDE -Coating available on request -Double facet, tight tolerance (H7). -This one-shot" drill-reamer is used accurately to drill and ream holes in one operation. -Used in composite materials. -Excellent for drilling graphite composites.

- $82.40 0 Price range: $82.40 through 0 MICRO GRAIN CARBIDE -5 Left hand Helix Angle, right hand cutting, chip breaking function. -Suitable for most composite materials. Handles higher feeds well. -Excellent for cutting finishing superwood fibre glass, ideal for routing contoured surfaces. -Ideally...

- $89.63 0 Price range: $89.63 through 0 MICRO GRAIN CARBIDE - ensure clean, burr-free edges, reducing the need for additional finishing -They prevent delamination of the aluminium layers, preserving the integrity of the panel -Suitable for architectural cladding, singage and shopfitting application...

- $60.79 Price range: $60.79 through MICRO GRAIN SOLID CARBIDE -Low vibration, long reach for vavity milling. -Specially designed front radius and teeth for stability -High metal removal rate -High table feeds possible -User friendly -Application for a range of materials from soft to hardened steel...

$112.00 .00 Price range: $112.00 through .00 MICRO GRAIN SOLID CARBIDE DESIGN FEATURES: Right hand cutting, Left hand helix, H6 tolerange Design for reaming in steel, non-ferrous materials cast iron On request: Out of Range / Other sizes and coated product

- $101.86 Price range: $101.86 through MICRO GRAIN SOLID CARBIDE -Tool Designed for high-volume stock removal -40 Helix Angle to promote rapid chip evacuation. -Varibale flute design minimizes vibration and chatter for smooth cutting -Thicker core increases tool strength, reducing deflection and bre...

- $60.45 Price range: $60.45 through MICRO GRAIN SOLID CARBIDE -90 drill point (60 drill point on request) -Unique four facet point. -The spotting drill will offer greater precision in spotting applications. -This tool can be used to stabilize a deep hole drilling operation or chamfer a hole for ano...

- $145.60 HIGH SPEED STEEL -Custom sizes available on request -Designed to be used with rotary holders to cut polygonal profiles into a material -Ideal for mass production -Effective on stainless steel, titanium, aluminium and brass -Allows for efficient, single-pass machining, reducing cycle times

- $52.40 Price range: $52.40 through MICRO GRAIN CARBIDE -37 Helix Angle, right hand cut, centre cutting. -Suitable for routing contoured surfaces with 3D software.