PiranhaTools 19 views   2 clicks ♡

New mitre 3D Polycarbonate square. For mitres and cross cuts. Can be used for marking 45° and 90° mitres on battens.This saves time and increases precision in making mitre joints or cross cuts.- The short side 89 mm of 2 x 4 wood can be divided into 1/2, 1/3, and 1/4.- Ideal for marking work when...

SHINWA Mini-Protractor with halfround base and two blades. This pocket sized protractor has a measuring area 0 - 180°, with locking screw, steel body/base and blades chrome plated essentially glare-free, graduation deeply edged. Size of bow: D = 40 mmLength of blade 100 mmLength of graduation on bl...

Steel rulers from the Japanese manufacturer Shinwa are produced mainly in Japan and are the rulers most widely used by Japanese manufacturers. The highly legible scales and special finish for reduced reflections make them a first choice. Shinwa rulers are made of stainless steel to Japanese Industri...

This Shinwa Ruler Stop is made to fit Shinwa Stainless Steel Rulers and any other rulers of exactly the same width and thickness. Steel rulers NOT included.Three options to choose from to fit Shinwa 150,300, 600 and 1000mm stainless steel rulers.

Spare needles for Stud Finder Pro pack of ten.

In recent years, pitches for screws have been strictly controlled in building for some house builders. The pitch can vary depending on builders and building structure.This tool can cover most cases.This tool can mark dots using five different pitches: Every 100mm,150mm,200mm,250mm and 300mm.- Accura...

This pocket sized square has radiused corners at the end of the blades. The graduation is deeply edged and easy to read. Suitable for all small work, drawing and marking. Made of stainless steel by Shinwa in Japan.Key Features- mm scale on both sides- 150 x 75 mm

StopLossBags™ allow you to preserve the fresh off-the-shelf quality of wood finishes. The specially formulated 3-ply construction helps prevent loss of solvents while a special gas barrier inhibits oxygen penetration into the bag. Each bag holds 1.05 quarts or 1.0 liters.Almost all woodworkers hav...

StopLossBags™ allow you to preserve the fresh off-the-shelf quality of wood finishes. The specially formulated 3-ply construction helps prevent loss of solvents while a special gas barrier inhibits oxygen penetration into the bag. Each bag holds 1.05 quarts or 1.0 litres.Almost all woodworkers hav...

The unique marking measures from Hultafors have facilitated work for craftsmen for decades. With our latest range of TALMETER marking measures we extend the range of possibilities further.White, impact resistant steel tape measure, 25 mm blade width, graduated in millimetres using inkjet technology...

The unique marking measures from Hultafors have facilitated work for craftsmen for decades. With our latest range of TALMETER marking measures we extend the range of possibilities further.White, impact resistant steel tape measure, 16 mm blade width, graduated in millimetres with an ABS plastic case...

A versatile and easy-to-use nail puller. Despite its small size, it can easily pull out a 5-inch nail, even when the head is off or buried deep in the wood. To be used with your carpenter’s hammer and pull using the claw.Made in Sweden

A flexible blade for precision work close to the workpiece. Used for removing residues of glue and silicone. Recycle worn-out blades as metal scrap.- Used for removing residues of glue and silicone.- The blade can be mounted for right or left-handed usageMade in Sweden

Steel Wedge Rounds 2-pack bag for each size.- 9 MM RING WEDGES 2-PCS SK 9 SB (Dia. 9mm x 14.5mm)- 11 MM RING WEDGES 2-PCS SK 11 SB (Dia. 11mm x 16.5mm)- 12 MM RING WEDGES 2-PCS SK 12 SB (Dia. 12mm x 17.5mm)- 16 MM RING WEDGES 2-PCS SK 16 SB (Dia. 16mm x 22mm)

A small, useful steel 19cm wrecking bar that can be used to pull small nails, remove wood strips or to open cans.- Has three different functions for pulling out nails.- Thin contact surfaces make it easy to use in narrow spaces. Made in Sweden

An ergonomically designed hammer, forged in one piece for increased durability with a vibration damping urethane plug. Thin, strong claw that affords easy access without leaving marks. The claw opening and angle give the best possible grip on the nail. Ergonomically designed handle with clear end st...

Smart hammer holder with ergonomic design. Ergonomically-angled design prevents the hammer-handle from striking your leg when walking, or getting in the way when bending down on your knees. The angle also makes it easy to access the hammer. Easy to attach to trousers, a belt or a tool vest. Made in...

An ergonomically designed hammer, forged in one piece for increased durability with a vibration damping urethane plug. Thin, strong claw that affords easy access without leaving marks. The claw opening and angle give the best possible grip on the nail. Ergonomically designed handle with clear end st...

An ergonomically designed hammer, forged in one piece for increased durability with a vibration damping urethane plug. Thin, strong claw that affords easy access without leaving marks. The claw opening and angle give the best possible grip on the nail. Ergonomically designed handle with clear end st...

A smaller and lighter hammer developed for precision and work in tight spaces. Forged in one piece for maximum strength and durability. The U-shaped striking face makes it possible to work close to ceilings and corners without leaving marks on surrounding surfaces. This makes the hammer ideal for el...

TWO CHERRIES chisels are exclusively hand-forged. This careful hand crafting is the source of the high quality and long service life of TWO CHERRIES tools. Electronic monitoring during the forging and hardening process ensures that these high standards are consistently maintained. Uniformly hardened...

Two Cherries Tools are made of the highest quality German steel. The blades are skill-fully heat-treated using an immersion bath method to achieve a hardness of Rc 61. This means that sharpening may take a few extra minutes, but they will hold an edge significantly longer than almost any other chise...

Two Cherries traditional burnisher with polished HSS rod. Primarily for sharpening curved and straight scrapers.Made in Germany

The Two Cherries 2-Cut chisel is a multipurpose tool used for chiseling, cutting, slitting, carving, mortising, notching and scribing. Features include:- Chisel width: 26mm- The first universal tool with 2 cutting edges - front and side- Quality cutting edges ground on both sides- Mirror bright poli...