Ecoinnovation 30 views ♡

This rotor has been designed to attach to a Smart Drive PMA and is rated up to 30m head with a 2.0kW output.We have two options: fully assembled or a DIY kit that you assemble yourself. TheFixing kit is optional, this kit will attach the Turgo rotor to a turned down 25mm shaft that is 17mm in diamet...

The PowerSpout TRG is a Turgo turbine which on a suitable site can produce up to 1.6 kW, 24 hours a day, all year. If you need more, units can be stacked to generate over 16 kW on the same penstock and power cable.Specifications- Head range: 2 to 30 m (6.6 – 100 feet)- Maximum flow per turbine: 16...

PowerSpout Packages represent our most cost-effective engineering solutions. These packages are available exclusively through our dealers where dealers can often advise how to best package what best combination of products to order in order to minimize the freight cost.The TRG Spare Parts Bundle con...

These MC4 type branch connectors allow two PV strings to be connected together in parallel.They are sold in male and female pairs.Note that if you use 2 sets of branch connectors to connect more than 2 PV strings together then you need to be careful not to exceed a total of 30 amps and a 15A string...

This Slocable brand MC4 fuse is intended for off-grid ELV PV arrays of 3 or more strings.If you require both poles to be fused, then buy 2 and install one in both the ive and –ive wires. You must no t open them under load, so ensure that after the strings are combined that a correctly rated DC swi...

This tool comes in handy if you need to disconnect a Slocable MC4 connector.Slocable MC4 type connectors may be damaged if the correct separation tool is not used.

This is a great power display and will find many applications in ELV renewable energy applications.For a video to see one working click here.This digital amp meter displays amps, volts, Watts and a kWhr running total.Display has a backlight and it is rated for up to 100VDC input.We also offer this m...

This for water and other low viscosity fluids- Inlet & Outlet: 1" BSP (25mm)- Accuracy: /- 1%- Max pressure rating: 20 bar- Flow range: 10-120L/min- Units: L, GAL, PTS, QTS- Easy to install, in line or at the end of a delivery pipe.- Can be calibrated for your fluid type- Supplied with English instr...

These ceramic liners are used on our React pump.They are rock hard and when pumping clean water will last for many years.The seals that these ceramic liners run in will need to be replaced more often than the liners.Ceramic liners can become worn and start to leak if you have fine hard particles in...

The React pump has one oil seal on the shaft that protrudes from pump body and 3 seals - one on each plunger. If you see an oil leak from any of these 4 seals at a service check (or you may notice that the oil level in pump body is falling), then these 4 seals will need to be replaced.You can also b...

This service spare parts kit includes all the consumable parts you need for two services of your new React Pump 2. Also a great kit for existing RP1 clients.- 2 sets of wet side seals- 2 sets of small oil seals- A large oil seal- A pressure sensor- A set of valves- Oil seal drilling jigs, a 2.5mm dr...

This React pump valve kit includes:- 6 x hard wearing stainless steel valves on stainless steel seats in a plastic housing- 6 x o-ring valve seatsValves will wear in time and start to back flow. This back flow will reduce pump efficiency over time. These valves are very hard wearing and should last...

This wet side seal kit includes all the seals (x6), o-rings (x3) and plastic seals spacers (x6) to fully refurbish the seals in the brass head of your RP1 or RP2 pump.You can also buy the complete spare parts kit here. Please read the user manual before servicing and watch our videos. If after watch...

This quality outside rated switch will find applications in:- Disconnect for PowerSpout DC hydro turbines- Disconnect for PowerSpout DC SHP-TX water pump- Disconnect for DC ELV PV arrays- Disconnect for DC LV PV arraysThese SUNTREE switches (as configured) with this type of MC4 type fittings (they a...

The React pump is a very durable product. The triplex ceramic pump can be fully serviced with consumable parts available on this website or through your dealer.Some clients who need to service their React pump may decide to swap the body over and service the removed body as time allows - we think th...

Every React pump owner with a suction lift should have a spare foot valve on the shelf (other than those who have a gravity fed supply)This foot valve assembly comes with:- High quality (low loss) PVC foot valve - must be mounted vertically- 25mm Stainless steel barb fitting included- 2 x large blue...

This wire is available in a 250m roll and in 20m increments.Note we have a good price of 100m lengths at the moment. Lengths shorter than 250m do not come on a drum.This wire is available on this website for the express purpose of providing cost effective wire (often below RRP) to our clients buying...

This wire is available in a 250m roll and in 20m increments. We also have some longer rolls in the range 300-400m. if you need a roll longer than 250m and we will look in our store for you.This wire is available on this website for the express purpose of providing cost effective wire (below RRP) to...

Replacement or spare motor for your React Pump.42 Pole is for Standard React Pumps up to 160m of head. 42 pole stators work with type 2 rotors.36 Pole is for High Power React Pumps above 160m of head. 36 pole stators work with type 4 rotors.These motors also work with the PowerSpout SHP-TX Pumps.Ref...

These MC4 type branch connectors allow three PV strings to be connected together in parallel.They are sold in male and female pairs.Note: if you use 3 to 1 branch connectors then you need to fit a 15 amp fuse on each PV string before the 3 to 1 connector.If this is used with our React pump you must...

Pack of 5 fine mesh filter bags for your React pump intake.These filter bags measure 300mm wide x 450mm long. Two are sent with every new React pump. Having some spare will prove useful.Your filter bag should be checked every month and replaced as needed. Dirty filter bags can be put in the wash and...

The React pump pressure sensor will fail high if subjected to freezing temperatures. This then prevents the React pump from starting and helps to limit more frost damage to the pump were it to start while frozen.If your pump will not start and you have a blue LED (which indicates pressure setting ha...

If your RP1 or RP2 pump is still spinning but not pumping water, it likely has one or both of these issues:- Worn wet side seals- Damaged, stuck, or debris-jammed head valves Easy Brass Head Exchange (NZ Customers Only)Instead of sending your entire pump back for servicing, you can opt for a brass h...

PowerSpout Packages represent our most cost-effective engineering solutions. These packages are available exclusively through our dealers, who can frequently secure discounted international freight rates.The PLT Spare Parts Bundle contains:- PowerSpout PLT Turbine- SKF 12-month auto greaser and pre-...