Anchorman 62 views   1 clicks Claim this Business♡

Great insurance for your GoPro.Always tether your camera when using it on your Ski.Easy to install.Stainless Steel Lanyard and spring clip.250min to 1500max in length.10kg max load.( GoPro not included. )

Bracket for mounting Railblaza accessories on the Seadoo FishPro watercraft,Mounts specifically designed for Seadoo models from 2018 to 2023, including GTX, RXT, and FISH-PRO.Highly durable and visually appealing.Comes with integrated Navigation Lights. (Note: Lights need to be connected directly to...

This Bi-Colour 2NM navigation lights fit under a standard RAILBLAZA StarPort. Simply remove the existing bolts and reinstall with longer bolts supplied. No hole drilling into your ski Easy installation with no drilling required.All designs are protected by copyright. ©

Discover the perfect mount for RailBlaza Navigation lights or GoPro Mounts with anchorman.nz front RailBlaza bracket for the Seadoo Windscreen!In just two minutes you can be ready to go - simply remove the two lower screws on the windscreen and insert the anchorman bracket in the vent slot, then rei...

Compact and Lightweight setup in Bag for easy no hassle storage and no risk in damaging your jetski. Easy flush vents on each end of bag.1kg cooper anchor Compact custom made strong PVC Bag.Rigging to minimise damaging your ski. ALL Marine grade Stainless fittings. Poly yacht braid with Heat shrink ...

Cooper Anchor Beach Launching Kit --For those using the anchor kits and want to leave the anchor in the water while taking kids out on the biscuit. Clip this rubber marker buoy on the anchor line so you will easily be able to find the anchor back at the shore.(Use a sharpie and write your phone number on it to identify it as yours.

JetSki tether.Secure your Ski with our to tie up to the jetty or in emergency situations. Access the Tow Eye without diving under the water or leaving the driver's seat—simply attach the secure loop to the ski and a light bungee over the mirror to secure. Additionally, the Anchorman Cooper anchor ...

Compact and Lightweight.No risk in damaging your jetski.The holding power of any anchor is directly related to how deeply it sets and holds the sea bed. Most anchors on the market today are restricted by design to plowing along near the surface of the sea bed and rarely if ever disappear completely ...

Unique PVC Rip-stop Fabric teamed tough polyester woven webbing combine to make it the most popular sea anchor on the market.Ideal for fishing, designed to slow your rate of drift and keep you over the fishing ground longer. Easy to use and improves fishing success. Also can be deployed as aid for disabled craft.

This system clips directly to the anchorman.nz Ski tether making connecting the anchor to the ski super easy.Easy to setup at the boat ramp.Unzip the custom made anchor bag in the foot well and clip the anchor on the towing tether. Launch the ski then just drop the anchor in the water. This setup h...

Jetski or small boat anchor rig.Cooper anchor 1kg blue for boats up to 3.5m in length.Rigged for a cable tie break out. (cable tie attached to the shank of the anchor. If the anchor gets stuck the cable tie can be broken releasing the anchor from an obstacle. )3m 6mm galv chain wrapped in a protective sheath.Stainless swivel, thimble and captured pin shackle.

Anchor rigged for small boats or RIB.Cooper anchor 1.5kg Black for boats up to 5.0m in length. 5m of 6mm galv chain wrapped in a nonabrasive protective sheath.(6mm Stainless Steel Chain option available. POA )Includes 30m x 10mm Fluro Braided Anchor Rope.2x Stainless swivel.1x Stainless Steel thimble.2x Double Steel captured pin shackle.1.5kg Cooper Black Anchor.

This product is an essential tow line for towing another jetski in an emergency, away from danger or back to land. If the battery is flat or something gets stuck in the intake, the jetski can become disabled. The tow rope can be simply hooked onto the anchorman.nz jetski tether, or onto the cleat at...

This product is an essential tow line for towing another jetski in an emergency, away from danger or back to land. If the battery is flat or something gets stuck in the intake, the jetski can become disabled. The tow rope can be simply hooked onto the anchorman.nz jetski tether, or onto the cleat at...

Reed. NAVY BLUE FLEECE LINEDAquatherm FLEECE.See Size Guide Below These socks are a perfect for winter fishing. Keep your feet dry even if you need to get into the water to launch your Boat Kayak or JetSki. If your feet stay dry your feet stay warm. FABRIC Lighter and more flexible than a traditio...

A Great solution to repair damaged chillcheaters.----------------------How to repair damaged chillcheatersIdentify the leak in the sock by partially filling the inside with water.If there is a leak you will see water coming through to the outside surface,.Mark the area then dry the outside surface t...

Only available in NZ.A Great solution to repair leaky chillcheaters.You send the CHCH to our warehouse and w e will test for leaks and repair your Chillcheater socks.----------------------How we repair damaged chillcheatersIdentify the leak in the sock by partially filling the inside with airIf ther...

Rusler's JetSki Saddle bags provide extra storage within easy reach. Polyester Waterproof Canvas fabric with top waterproof zip entry to main compartment this saddle bag solves many storage issues. The bag measures just 400mm x 250mm x 100mm with a front pocket Velcro entry. These definitive saddle ...

Rusler's all stainless steel JetSki net includes a 1500mm circumference s/s frame mounted on a 25mm s/s handle to 625mm length. It features a s/s solid ring as a locking nut one the handle (for securing net with bungee cord to rod holder). Two grips are positioned for:1/. extra leverage when landing...

A Great idea for someone who is hard to buy for.Let them choose a wide range of products for themselves or a fantastic idea for a thank you or a special occasion like a Birthday or Fathers/Mother Day.

This 3D Printed Cap Locks your precious rod into the Rod Holder and prevents the shaft from coming in contact with the opening of the holder.Narrow gauge rod shafts are not suited to your standard 40mm rod holder as they swim about inside and can be damaged or even fall out.The cap slides on the top...

This Anchor kit provides a complete solution, featuring premium anchor for jetski anchoring, plus highest-grade New Zealand-made rope and Marine grade 316 stainless steel chain and fixings.Compact and lightweight, it comes with a custom-made durable PVC bag for easy storage.Designed to protect your ...

- Heavy Duty Stainless Steel Head 8mm- Machine Milled 3 way cutting edge point- Diamond Head shape- Gaff Head Taped and Dyed- Protective point Sleeve- Stainless Steel 19mm x 400mm Handle- S/S collar- Handle Grip Nylon Glass- Braid Security Lanyard 3mm- Hand Crafted- 5 Year Manufacture Warranty- 100...

This 3d printed holder supports the "Procure" Scent Bottle or Ocean Angler Secret sauce.The loop hooks over a rod holder for a secure and easily accessible location. The Upright version is great for the spray scent and the upside-down version is great for the gel.all designs are Copyright. ©