classic car accessories 221 views   2 clicks ♡

Hall effect electronic conversion to replace points & condenser - called Stealth as it fits under the existing distributor cap without any changes or other parts showing.Suits:Lucas 35D8 twin points distributorTriumph StagBetter starting - more M.P.G. - smoother running.- Will only work on Negative ...

Pertronix 1281 Ignitor kit to suit 1957-74 V8 Fords with original Motorcraft/Autolite single point distributor.Points are GF82V as per imageFor over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. It is the number one Electronic Ignition Conversion Kit...

Pertronix 1181LS Ignitor I 'Lobe Sensor' ignition kit to suit the Delco-Remy distributor on 8 Cylinder vehicles as per following.AMC 1958 - '74Buick 1957 - '74Cadillac 1956 - '74Chevrolet 1957 - '74GMC Truck 1957 - '74Oldsmobile 1956 - '74Pontiac 1957 - '74This is the 'lobe sensor' version of kit - ...

Pertronix 1282 ignition kit to suit Motorcraft distributor on Y-Block V8 Engine.Suits:Ford Distributor on Y BLOCK V8 Engine, 1954-56, with points GF81V, photo included on listing to check.For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. It is t...

Pertronix 91181 Ignitor II ignition kit to suit the Delco-Remy distributor on 8 Cylinder vehicles as per following:AMC 1958 - '74Buick 1957 - '74Cadillac 1956 - '74Chevrolet 1957 - '74GMC Truck 1957 - '74Oldsmobile 1956 - '74Pontiac 1957 - '74This Pertronix Ignitor II kit takes the Ignitor technolog...

Pertronix Ignitor for 8 cylinder Lucas 29D8 distributor only - as installed on Leyland P76.This uses the same sized module as the Lucas 35D8 - but the base plate is different, please note the differencesFor over thirty years, the Ignitor has proven itself in applications ranging from race cars to tr...

This kit is designed to replace the points and condenser inside a Lucas 35D Distributor. The Lucas 35D was fitted to a wide range of vehicles including Land Rover, Range Rover, Rover, TVR, Morgan and more.This is suitable for early Rover V8s. Early Rover V8s are engines classed as pre 1976. As many ...

This ignition kit is designed to replace the points and condenser inside the DVX6A distributor.The Lucas DVX6A was fitted to a variety of British 6 cylinder vehicles including iconic classics such as the Jaguar XK120 and original Jensen Interceptor.This kit is for negative earth vehicles.Fitment inc...

Powerspark Electronic Ignition Kit (Positive Earth) for Lucas D3A4 DistributorThis ignition kit is designed to replace the points and condenser inside the Lucas D3A4 Distributor.This distributor was fitted as standard to Massey Ferguson MF 35, TEA 20, 135, and TED 20 Tractors.This Powerspark Electro...

The Powermax Rotor Arm is the perfect upgrade for your Rover V8 with Lucas 35D distributor.Replaces original part number (usually Lucas) DRB195C.Traditional rotor arms feature a moulded body with a metal conductor riveted to the body. Over time this rivet can come loose - the Powermax moulded rotor arm has better strength and durability as the conductor and body are moulded together.

Red rotor arm suitable for all Ford Motorcraft / Fomoco 4 and 6 cylinder distributors. Has a modern design for improved performance and durability and is fitted with an internal steel spring clip for an extra secure fit.Iconic classic cars that feature this rotor arm include the Ford Capri, Consul, ...

This switch is floor mounted and operates the main headlight dip feature with the driver's foot.It has 3 electrical terminals on the base (56a, 56 & 56b) and these are accessed from underneath.Suitable for a number of vehicles, including Austin, Morris, Triumph, MG, Hillman & Landrover.Replaces 502087, and also suitable for replacing Lucas 31800.Distance between fixing holes 38mm.

This solenoid has a manual push button to operate the starter from the engine compartment.A non-Lucas part, but similar to Lucas 76445, 76464, 76469, 76497, 76491, 76702, 76737, SRB316, BOW3905030

Allstar Brake light switchSwitch Actuation Style: Fluid pressureCircuit Activation: MomentaryThread Size: 1/8 in. NPTLighted: NoAmperage Rating: 4.50 ampsSafety Cover: NoTerminal Type: ScrewLabeled: NoWeatherproof Sealed: NoWiring Included: NoRelay Included: NoSwitch Material: SteelSwitch Finish: Natural

Full tonneau cover to suit MGB/MGC Roadster, all years.This is an all black vinyl cover for RHD models without headrests.Fits over cockpit with the hood downCan be used as a hood coverCenter zip allows cover to be half open when driving

Full tonneau cover to suit MGB/MGC Roadster, all years.This is an all black vinyl cover for RHD models where the seats have headrests. MGB Roadster with dash top posts ( does not fit cars with windscreen dot fasteners ) Fits over cockpit with the hood downCan be used as a hood coverCenter zip allows cover to be half open when drivingLarge headrest pockets( photos show the no headrests version ).

High quality aluminium-framed mesh windstop with a Moss-designed bracket set. The windstop folds down when not in use, and has about 1 1/2" of vertical adjustment for a perfect fit. The brackets fit under the top frame or tonneau brackets, and installation takes just about half an hour.

Genuine chrome over metal reproduction bonnet hinges for the classic Morris Minor car from '51 onwards.Price is for two hinges - LH & RH.Great way to improve the look of your old classic, a must for any restoration project.These are great quality and may also fit a number of similar austin or morris vehicles of the same era.

Brand new chrome metal boot hinges to suit the Classic Mini.Price is for a pair.Great quality and provides clean fresh look to any restoration.

Pair of large rubber bonnet/boot hooks.Complete with mounting brackets in stainless steel.Can be used for all types of panel or lid securing.Easily released by hand but tightly fastened when in hook. Rubber hook length approx 125mm.Motorhome, race car, boat, truck, tractor, electrical, engineering, guards, safety.

Chrome-plated, large toggle fasteners.Used for keeping panels, boots, bonnets shut.Price is for a pair of fasteners.Total length of clip and fastener approx 85mm, mounting holes approx 22mm apart.

Pair of black leather bonnet straps.Traditional fixing for use on boots, bonnets & panels.Price is for a pair.

Stainless steel bonnet boot spring catch in black or stainless finish.Price is for for one set of spring catches (2) - select black or stainless finish from the options.Quality product for any type of bonnet, boot, panel, guard fixing on race or other applications.

A pair of small rubber bonnet hooks and fixings.Rubber hook approx 6cm long.