Allflow 67 views   1 clicks ♡

available in sizes from 15mm to 100mm.

For general water tap use.

Cast iron valve with stainless steel disc with threaded holes.These lugged butterfly valves are made from cast iron with stainless steel disc. Starting at $174.32 GST, t hey are available in sizes from 50mm - 200mm. Used in a number of applications for industries including food processing, pharmaceu...

Cast iron valve with stainless steel disc.Suitable for a wide range of general water applications including water trucks, irrigation, cement hoppers and other industrial applications.Key features - Unique bonded cartridge design gives them a longer life spanWill fit all standard flanges, operated by either a lever or gear boxVacuum -16 BAR pressure rangeTemperature range -40°C to 120°C

Stainless steel check valve with viton rubber seat

For vertical or horizontal installations. The rubber coated ball is free inside the valve body to move completely out of the main flow stream to avoid restrictions and blockages common with waste water. This also requires less pressure to open than spring loaded check valve. Ball check valves are easily serviceable via the removable ball cover plate.

Comes with nitrile rubber seat Applications - Pneumatic and water systems- Air conditioning and heating systems- With strainer - a foot valve for irrigation, industrial water supply, water circulation SpecificationsEnds: Screwed BSPBody and trim: Brass body, Stainless steel plate, NBR seal, Stainless steel springRating: Up to 18 bar CWPMax temp: -30oC to 110oC

Swing check valve with soft seat. Applications include use in water, other liquids and gases.SpecificationsEnds: Screwed BSPBody and trim: Forged brass body and flap with NBR rubber seatRating: From 12 bar CWP for 15mm to 10 bar from 50mm

Used in-line as a non return valve to stop fluids flowing back through your system. - Strong compact design- Exceptional flow rate means shorter pumping time- Smooth operating valve for high efficiency- Screw cap access for in-line servicing to all moving partsAll components of this valve are manufa...

Used on the end of a suction line to stop fluids in the line emptying when the pump is turned off, thus eliminating the need to prime your pump at start up. - Unique design provides self-cleaning as part of the valve operation- Screw cap access for servicing to all moving parts if required- Operates...

Comes with a plastic screen.

Long-arm Each size comes with a 330mm long brass arm Max Pressure @ 20°C = 12 BarMetric Sizes BSPT (DN)Imperial Sizes BSPTSizes and specifications Each valve is supplied with: - Complete Plastic Valve Body- Long Brass Arm- 650mm Cord and Nuts- Standard or Long Tail Glass Fibre Reinforced Nylon Adap...

Female/Female Tee Handle Gas Ball Valve Applications - Industrial, Pneumatic, domestic and hydraulic installation- Hot water- Dry steam- Gasoline & Fuel- Gas-Oil, Kerosene, Oils- Compressed Air- NOT suitable with methyl alcohol and saturated steam Specifications - Maximum Working Temperature 60oC- Minimum Working Temperature -20oC

Applications - Industrial, pneumatic, domestic and hydraulic installation- Hot water- Dry steam- Gasoline and fuel- Gas-oil, kerosene, oils- Compressed air- NOT suitable with methyl alcohol and saturated steam Specifications - Maximum working temperature 60oC- Minimum working temperature -20oC

Specifications6000 PSI RatingEnds: Screwed BSPTBody and trim: 316SS, PTFE PackingRating: 413 Bar

Manufactured from high quality DZR brass alloy with Viton 0-ringsNeedle valves allow precise control from fully-off to fully-on.Applications - Suitable for fuels, water and air- Precision instrumentation- Hydraulic Control Systems- Anywhere precise control is needed Key specifications - Operating Te...

24 Vac standard coil comes with flow control.

PlasticCan be installed at any angle. Allows fluid to flow in one direction only. Applications: - Pumping- Marine- Irrigation- Domestic- Agricultural- IndustryFeatures: - Serviceable - valves can be taken apart for servicing- Non-corrosive high quality materials- Glass reinforced nylon body- Stainless steel spring- Nitrile rubber O-ring- BSP thread- Max working pressure 1600kpa - 230 psi at 20oC

Suitable for any type or size tank Hansen designed this tank level indicator after customers asked for a reliable, maintenance free, and heavy duty product. Customers can - easily monitor water levels- prevent pump burnout caused by dry tank- see at a glance the tank water levelIt can be mounted on ...

High performance Trough/Tank Valve (29psi, 570l/m) - Delivers high volumes of water quickly with unrestricted full flow- Low operating pressure required, reducing pumping cost and increasing flow- Suitable for side, bottom and top entryManufactured from strong, non corrosive UV stabilised materials - approved for use with drinking water.

- High quality full flow valve- Smooth open and close action- Lightweight and strong- Corrosion resistant- UV Stabilised - Drinking water approved- Removable handle for security and varying applications- High pressure 16 Bar/235 psi rated- Manufactured from glass fibre reinforced nylon with polypropylene ball and nitrile rubber O-rings.AS/NZS 4020 ApprovedSGS M&I Approved

High flow including float.