Arc Welding & Safety Supplies 1 views Claim this Business♡

Sn50/Pb50 solder has a melting point of 183oC to 216oC, it is a general purpose solder for lead lighting, plumbing and ideal for wiping and assembly.It is most commonly used for copper drain piping, tin plating, seaming joints and sheet metal.It can also be used to solder copper and most copper alloys including lead, nickel alloys and steel.Package:Sold per stick

For Carbon Steel, Stainless, Brass and Copper.Features:- Silver Content 56%- Size: 1.6mm- This filler offers good joint strength and ductility on nickel alloys, which will avoid the possibility of stress corrosion cracking.- This silver colored alloy has good match on stainless steel.- It has excell...

Rod Guard Cannister. 1 metreSpecially designed for 1m flux coated bronze or brazing rod and TIG filler metals.The 0.25cm wall thickness is designed for added strength and durability.When the long cap is removed, rod tips are exposed - allowing easy accessibility to cannister contents.Withstands 107Â...

This copper/zinc alloy exhibits minimal capillary action during brazing.This limits joint design primarily to lap, tee, and butt joints. \Features:- Copper-zinc braze-welding bare rod.- Exhibits minimal capillary action during brazing.- Limited joint designs to lap, tee and butt joints, although but...

Silver Brazing Rod - Flux CoatedFor Steel, Brass and Copper.Features:- Silver Content 45%- Size: 1.6mm- Used in brazing processes for the electrical industry and for brass parts.- Self fluxing rods with low melting point.- Suitable for applications: tube/ fittigs and valves.- Use with Harris Black Proloned Temp flux (Black paste).Package:Sold per rod.

Blockade Brazing AlloyDiameter: 2.0mmInnovative composition provides the ability to form a large shoulder or cap at the braze connection.Features:- A low cost alternative to silver bearing filler metals.- It has a narrow melting range, but its flow characteristics allow operators to “cap", or buil...

170 Brazing AlloyLow-fuming bronze bare brazing alloyFeatures:- Copper-zinc braze-welding bare rods exhibits minimal capillary action during brazing.- Limited joint designs to lap, tee and butt joints, although butt joints require some edge preparation- Good machinability- Produces porosity-free dep...

an allow which when applied on a heated base metal, will melt and produce a strong corrosion-resistant alloy coating.Features:- Strong corrosion resistant alloy.- Size: 6.3mm- Used where any welding of galvanised parts is required.- Can be used as a pre-treatment to produce base metals.- Repair Proc...

Boric Acid-free Brazing FluxECO SMART is a unique, patent-pending flux that is designed with color change technology that lets you know when it is time to braze.Its boric acid free environmentally friendly formula starts out as a green color that changes to clear when the flux becomes active.Feature...

Boric Acid-free Brazing FluxECO SMART® is a unique, patent-pending flux that is designed with color change technology that lets you know when it is time to braze.Its boric acid free environmentally friendly formula starts out as a green color that changes to clear when the flux becomes active.Featu...

Silver Brazing RodPackage:Sold per RodRods length is 750mm2% Silver BrazeTypically used for water systems, brazing copper to copper without the need of flux.Copper to brass requires the use of CA602 brazing flux paste: Comweld SBA Flux No2 (Code: WF602)Not suitable for use with ferrous metals. MAP g...

The CA801 flux is a strong Zinc Chloride-based liquid, specially formulated for soldering copper, brass, bronze, stainless steel, monel, and nickel-chromium.Not suitable for aluminium, magnesium or die-cast material.Active Ingredient: Zinc ChlorideSize: 250ml BottleDelivery:Special freight conditions required.Freight Cost $65 (excl. GST).

ALCoR is a very easy-to-use aluminum flux-cored filler metalsSize: 2.00mm x 500 mmPackage:1. Sold per Rod2. Sold as a packet of 20 rodsThe Alloy is designed for low temperature joining of aluminum base metals. Typical aluminum braze alloys melt and flow very close to the base metal melting temperatu...

Powdered Brazing Flux for use with aluminum brazing alloys.Use with Al-Braze 1070, 4047 (718) aluminum may be mixed with water or alcohol to form a paste.Active Temperature: 500-700°CAWS: A5.31 Type FB1ASize: 226gm Jar.

The Oxygen disposable cylinders have different valving requirements to those cylinders that are designed to be refilled, and different again to other disposable cylinders.Features:- M12x1 thread on the inlet and 3/8" outlet- a 3mm nipple nut and tail fitted

The disposable cylinders have different valving requirements to those cylinders that are designed to be refilled.As a result, there are dedicated regulators and other accessories that have been designed specifically for use with the range of disposable cylinders.Gas: NitrogenInlet Type: M10 x 1 Stage Bottom EntryOutlet Type:1/ 4'' SAE FlareFlow Pressure: 0-1500 kPaPressure Gauge: 2

The disposable cylinders have different valving requirements to those cylinders that are designed to be refilled.As a result, there are dedicated regulators and other accessories that have been designed specifically for use with the range of disposable cylinders.Gas: CO2Inlet Type: M10 x 1Outlet Type: 5/16'' Push FitFlow Pressure: 0-400 kPaPressure Gauge: 2

The disposable cylinders have different valving requirements to those cylinders that are designed to be refilled.As a result, there are dedicated regulators and other accessories that have been designed specifically for use with the range of disposable cylinders.Gas: Argon / Argon MixturesInlet Type: M10 x 1Outlet Type: 5/8-18 UNF, RH MaleFlow Rate: 0-8 L/minPressure Gauge: Flow Gauge

Fuel Gas Regulator with delivery pressure gauge

Features:Designed to quickly refuel Bernzomatic Micro Torches, lighters, soldering irons and other devices powered by butane.Butane Cylinder includes a universal fuelling tip for easy refilling.Flame temperature in air is 1760°C, making it perfect for various household tasks.Bernzomatic butane fuel is triple-refined for a higher quality experience.Package:Cylinder capacity: 160g

Fuel Gas Regulator with delivery pressure gauge

Key Suits Harris Regulator Model 825 Sav ‘T’Lock puts control back into the hands of the right person.Set ‘N’ Forget

In this Regulator you get extra strength, safety and large flows with excellent regulating characteristics. Combined with the latest in design, safety and quality.Features:Rugged all metal constructionMonel filter to improve life; easily changedAccurate - full cylinder pressure is controlled by the ...

This conventional gauge regulator is designed to control pressure and flow. Typical Harris design permits a small, compact, rugged regulator with unusually high flowFeatures:Tough - solid metal body & bonnetMonel filterBuilt-in burst reliefClear colour codingLarge, easy to read gauges, with safety sealConforms to AS 4267Rated to 240 barOxygen Fitted with internal self reseating relief valve