Astronz 38 views Claim this Business♡

This dovetail plate adapter is made to be used with a dovetail plate (sold separately), allows the user to change out equipment without the use of tools.Fits a Vixen styel dovetail rail.

Replacement Lithium-Poly (Lipo) rechargeable battery for iOptron SkyTracker Pro and SkyGuider Pro mounts. Features: - Assemble with high quality 3.7V Li-Poly rechargeable battery pack- Capacity 2000mAh- Voltage 3.7V, peak at 4.2V- No memory effect- Built-in IC chip will prevent battery pack from ove...

Height: 39mm

Height:25mm

Height: 55.5mm

5kg Counterweight for iOptron MountsThis counterweight will fit the following mounts: - CEM70/CEM70G- GEM45/GEM45G/GEM45EC- iEQ45/iEQ45 Pro- CEM60/CEM60EC- CEM40, CEM40G, CEM40ECPlease check the counterweight shaft diameter. Specifications Weight:5kg Outer diameter:128mm Inner diameter:28mm Height: 53mm

This counterweight package is designed for iOptron SkyTracker Pro camera mount to balance a heavy payload/long camera lens. It also fits to SkyTracker mount.The package includes: - Dovetail Plate- Counterweight bar and safety cap- 1.35kg counterweight- Locking handle

Now you can convert your CEM26/CEM40/GEM28/GEM45 mount into a wirelessly controllable one with this new iStarFiTM Wi-Fi adapter! With iOptron's StarFi you'll be wirelessly connected. You can wirelessly control your telescope mount with your favorite planetarium software through iOptron ASCOM driver ...

Height: 75mm

10kg Counterweight for CEM120 MountsAdditional 10 kg counterweight for the iOptron CEM120 equitorial mount.

NZ Power Supply for charging your iOptron AZ Mount ProInput: AC 100-240V 50/60Hz 0.4AOutput:DC 12.6V 2Afor changing 12.6V Li-Ion battery

The iOptron iGuide compact autoguider system consists of a portable mini guiding scope with a diameter of 30mm and focal length 120mm and an iGuider 1 Camera.The resolution of the autoguider is 6.44 arc sec/pixel, especially suitable for guiding with short to medium focal length telescopes.With diel...

GPS Module for the CEM26 and CEM40 mountsThis 32-channel external GPS module is for CEM26/GEM28 mount. It is also a replacement module for CEM40/GEM45 mount. It consists of a GPS module and a 6P6C connection cable (straight wired).

Heavy duty binocular adapter for iOptron AZ Mount Pro. The diameter of balance shaft is 20mm. Counterweights, mount and binoculars not included

2.5kg Counterweight for iOptron MountsAn additional 2.5kg counterweight for the CEM40, GEM45, CEM60 and CEM70 mount families.Older CEM40 use a smaller counterweight bar. Check the bar size before ordering.Specifications Weight: : 2.5kg Outer diameter: : 118mm Inner diameter: : 28.5mm Height: :25mm Locking mechanism Locking screw with pin Locking screw thread size M8

iPolar Adapter for iOptron CEM25 / ZEQ25 Mount for the iPolar electronic polar scopeThis adapter only fit an iPolar camera with USB port on the side

iPolar Adapter for HEQ6 / CGEM / NEQ6 / AZEQ6 mounts for the iPolar electronic polar scopeThis adapter only fit an iPolar camera with USB port on the side

iPolar Adapter for Skywatcher HEQ5 Mount for the iPolar electronic polar scopeThis adapter only fit an iPolar camera with USB port on the side