Bits4Bikes 783 views Claim this Business♡

The MotoPressor Mini Pump is your go-to portable inflator. It can inflate a 150/70 R18 tyre to 130psi in under 5 minutes. Weighing just 505g, it features a digital display, 3 pre-set pressures with auto shut-off, a 2m power cord with fuse protection, and multiple connection options—all packed in a...

The RC-2000 is ideal for charging and maintaining all your 12V and 6V lead-acid batteries.After it has fully charged a battery, the unit automatically switches to maintenance mode. This charger can charge and maintain batteries with a capacity from 2 to 60 Amp-hours. It emits a consistent 2A and inc...

The MotoPressor MicroPUMP is a cordless and rechargeable tyre inflator. It will pump to 130PSI and will inflate a 150/70 R18 tyre TWICE (0-36psi) and a 90/90 R21 tyre once (0-27psi) on a single charge.You can set and save 3 pre-set pressures (A, B and C), and the pump will automatically shut off onc...

Hook the charger up to your battery to access USB or Type-C charging and a built-in voltmeter. The unit has an ON/OFF switch. Turn it OFF when not in use to avoid draining your battery.To remove the unit from your bike, simply unplug it and slide it out of the mount.Features:- Includes a 1m SAE to S...

This phone holder and charger will charge both wirelessly and/or through a USB-C port. It will securely hold a phone up to 90mm wide and comes with all wiring necessary to connect to your motorcycle battery.Features:- Comes with 25mm handlebar ball mount with a 60mm clamp arm that can be securely lo...

This power adapter features dual 45W USB-C ports and an 18W QC3.0 USB port, as well as a voltmeter to display your battery's current state of charge.Features: - On/off button enables you to switch the unit off when you're not using your bike.- USB ports provide ample power to quickly charge all your devices such as phones, tablets, and GPS units.

This adapter will fit any 12V merit power socket. The two USB power ports offer 5V/2.1 Amp per socket. When the adapter is plugged in and powered, it will display the voltage of your battery. The USB charging ports will supply enough power to charge a phone, tablet and GPS.

Ideal for inflating motorcycle tyres and other vehicles. Cordless, rechargeable mini tyre inflator with built in torch.Features: - Pressure range from 3 to 120 psi and accurate to /- 1.5psi.- Pumps a 90/90 tyre from 0 to 32 psi in under 3 minutes.- You can set and store up to 4 separate pressures.- ...

Hook the charger up to your battery and you have two USB charging ports AND a voltmeter. Most importantly this unit has an ON/OFF switch so when you’re not riding, turn the unit OFF and you won’t drain your battery.Comes with a 1m long SAE to SAE lead and a mirror mount. The charger outputs a to...

Use this cable with the HELMETLOK (sold separately). Slide the cable through your jacket sleeve, hook the loops at the end of the cable onto the HELMETLOK (sold separately) and attach it to your bike.Alternatively, if your helmet does not have “D" rings, run the cable through your helmet’s chin ...

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W.BEFORE DRILLING ANY HOLES ensure there is enough space behind the installation point to accommodate the body of the socket.

These heavy-duty SAE battery leads (18 gauge wire) can handle 15 amps of current. Use this cable to bypass your motorcycle Canbus and connect directly to your battery. Includes 15 amp fuse and tethered dust cap. The cable is 45cm in length.

We all know how hard it is to get those “straight" chucks onto our motorcycle tyres. This chuck will fit most air hoses. If it doesn't screw directly onto the hose you are using, you will have to buy an adapter available at most plumbing supplies.

Having difficulty accessing your tyre valves? Well, that problem’s solved with these 90-degree brass valve stem extensions. Simply remove your valve cap and screw this extension onto your valve stem. Now you have easy access for connecting your MotoPressor Tyre Pump or Tyre Gauge.Fill your tyre wi...

Both of MotoPressor Pocket Pump and Mini Pump have a screw-on chuck. For the "Dextrously Challenged" and "Fat Fingered" few, it can be a little challenging unscrewing the chuck without losing 1-2 PSI. So, here's a solution.The MotoPressor Clip-on Valve Extension with deflation button, screws into th...

CNC machined aluminium CO2 inflator. The Control Valve head slips directly onto your tyre valve and puts you in complete control over how much CO2 to discharge at a time.

Wind noise on a motorbike produces noises levels up to 105dB; levels can reach 130dB for motorsport spectators. Permanent hearing damage can occur from 85dB.Developed over 20 years by leading experts, NoNoise MOTORSPORT Hearing Protectors are superior to traditional foam, wax or silicone earplugs. P...

Got an electronic device like a spot light with a male lighter attachment? Want to run it off your bike but don’t have a female lighter fitting? Not any more, just connect this fitting to any SAE battery lead lead and you're right to go!No soldering or splicing your wiring harness, simply plug it ...

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump? This adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets. To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at...

This connector will enable you to run accessories like the MotoPressor Pocket Pump, off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power ...

Batteries on some bikes like the 2015 BMW R1200GS LC are not easily accessible. In the case of the R1200GS, the battery is located behind the left-hand side panel. On other bikes, it's behind fuel tank covers and they have to be removed before you can get to the battery. Not much use if you want to ...

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. To install, attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the Red wire ( ) to the pin closest to the centre of the socket and the Black wire (-) to the pin closest to the edge of the socket...

Hard wire your charging solution to your bike battery. The two USB power portsoffer 5V/2.1A per socket and when powered on will display you battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS.NOTE - WIRE TO COME ON WHEN THE IGNITION IS TURNED ON. WE RECOMMEND INSTALLATION BY AN AUTO ELECTRICIAN.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it off a jump starter battery this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket..you now have power.NOTE – COMPATIBLE WITH JUMP STARTER BATTERIES USING EC5 SOCKET ONLY.