Bambu Lab - Complete hotend - X1/X1C

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required? General PLA YES YES YES YES Optional PLA Sparkle NO YES YES YES Optional PLA Marble NO YES YES YES Optional Wood/Rock/Metal-filled PLA NO YES YES YES Optional PETG YES YES YES YES Optional PVA YES YES YES YES Optional ABS YES YES YES YES Optional ASA YES YES YES YES Optional PC YES YES YES YES Optional PA NO YES YES YES Optional TPU NO YES YES YES Optional Bambu PLA-CF NO Highly
Recommended YES YES Required Bambu PETG-CF NO Highly
Recommended YES YES Required Bambu PAHT-CF NO YES Highly
Recommended YES Required Bambu PET-CF NO YES Highly
Recommended YES Required CF/GF Filaments from other brands NO Not Recommended YES YES Required
Learn more about replacing the complete hotend assembly on Bambu Lab Wiki. Note
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
- For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.