eSun eASA 1.75mm Filament 1kg
eASA is an impact modified resin composed of acrylonitrile, styrene and acrylic rubber.
P roduct feature
With a similarity in structure, eASA has excellent mechanical physical property as engineering plastics. Because the butadiene with double bond is replaced, eASA is given outstanding weather resistance, high temperature resistance and anti-UV performance. At the same time it works as an anti-static material that helps to gather less dust on surface.
Printing notices
1. Leveling printing plate before starting;
2. Heat the hot bed to 70~110℃ before printing, paste transparent golden polyimide high temperature resistance tape to the surface and keep it clean;
3. Keep a optimum distance between nozzle and plate (which allows you to paint out a flat line while moving your nozzles; if too far the line will be much mellow and too close will be hard to let filament out);
4. A lower filling rate can remit shrinkage crack for ASA during printing process;
5. Nozzle diameter should be bigger than layer thickness. Try parameter like 0.2, 0.25, and 0.3;
6. Better keep cooling fan off when printing and print in a closed area. Putting flapper around printer also helps to keep constant temperature environment.
PS: eASA has weak tear resistance, please try to avoid drag or twine; it’s also suggested to apply glue to plate to help it stick.
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.