Bits4bots 121 views 5 clicks Claim this Business♡
×-
$15Sample - eSun ePA12 (Nylon) 1.75mm FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$18Sample - eSun ePA12-CF (Nylon + Carbon Fiber) 1.75mm FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$18Sample - eSun ePAHT-CF (Nylon + Carbon Fiber) 1.75mm FilamentRecommended Build Surfaces Masking paper, PVP solid glue, PEIDISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidate...Buy from Store 0 0 -
$10Sample - eSun ePC (PolyCarbonate) 1.75mm FilamentBuild Plate Temp (OPTIONAL) 110 Characteristics：- High transparency- Nontoxic, environmental-friendly- High distortion temperature and high thermostability- Low flammability- Good malleability, easy to processDISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whe...Buy from Store 0 0 -
$10Sample - eSun ePLA-LW (Light Weight)Printing speed40-80mm/sNote: Printing test conditions: nozzle 190-280℃; layer height 0.2mm; bed 45℃; speed 40mm/s1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing spe...Buy from Store 0 0 -
$8Sample - eSun ePLA-ST 1.75mm FilamentNotch impact5.6963 Print performance comparison：PLAPLAePLA-STConclusionSurface finishNormalNo obvious layeringNo obvious layeringePLA-ST≈PLA >PLAHole column fitting model(The smaller the value, the better)0.3mm0.3mm0.3mmePLA-ST=PLA =PLAHanging model(The larger the value, the better)PLANote: Pr...Buy from Store 0 0 -
-
$15Sample - eSun PVA 1.75mm FilamentBuild Plate Temp (OPTIONAL) No heat/ 60 ~ 80 CBuy from Store 0 0 -
$15Sample - eSun Wood 1.75mm FilamentBuild Plate Temp (OPTIONAL) No heat/ 80 C Characteristics Wood PLA Filament is made with blend of polylactic acid and fine wood particles, can be sanded and painted. It has the ease of use similar to PLA and is great for artists and hobbyists who are looking to experiment with different printing mat...Buy from Store 0 0 -
$8Sample - Gsun Matte Magic PLA Filament (Dual Colour)Want to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$8Sample - Gsun Tri-Colour Silk PLA FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$8Sample - eSun ePLA-Silk Magic FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$8Sample - Gsun Rainbow Silk PLA FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$8Sample - Reflow Recycled Matte PLA - Earth TonesFlexural strain at break % 3.6 ISO 178SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultermaker 2 with 0.4 mm nozzle was applied for preparing both tensile and flexuralspecimens. Line width: 0.35 mm - layer height: 0.2 mm - Printing speed: 15 mm/s -retraction distance and spe...Buy from Store 0 0 -
$8Sample - Reflow Recycled PETG - Clear and Natural CollectionFlexural strain at break % 4.2 ISO 178 SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultimaker 2 with 0.4 mm nozzle was applied for preparing both tensileand flexural specimens.Line width: 0.35 mm - layer height: 0.2 mm - printing speed: 20 mm/s - retraction distance and sp...Buy from Store 0 0 -
$8Sample - Reflow Recycled PETG - Pastel CollectionFlexural strain at break % 4.2 ISO 178 SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultimaker 2 with 0.4 mm nozzle was applied for preparing both tensileand flexural specimens.Line width: 0.35 mm - layer height: 0.2 mm - printing speed: 20 mm/s - retraction distance and sp...Buy from Store 0 0 -
$8Sample - Reflow Recycled PETG - Seaglass CollectionFlexural strain at break % 4.2 ISO 178 SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultimaker 2 with 0.4 mm nozzle was applied for preparing both tensileand flexural specimens.Line width: 0.35 mm - layer height: 0.2 mm - printing speed: 20 mm/s - retraction distance and spe...Buy from Store 0 0 -
$8Sample - Reflow Recycled PLA - Monochrome CollectionFlexural strain at break % 3.6 ISO 178SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultermaker 2 with 0.4 mm nozzle was applied for preparing both tensile and flexuralspecimens.Line width: 0.35 mm - layer height: 0.2 mm - Printing speed: 15 mm/s -retraction distance and spee...Buy from Store 0 0 -
$10Sample - Reflow Recycled Matte PLA - Home DecorFlexural strain at break % 3.6 ISO 178SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultermaker 2 with 0.4 mm nozzle was applied for preparing both tensile and flexuralspecimens. Line width: 0.35 mm - layer height: 0.2 mm - Printing speed: 15 mm/s -retraction distance and spe...Buy from Store 0 0 -
$10Sample - Reflow Recycled Matte PLA - Shades of GreyFlexural strain at break % 3.6 ISO 178SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultermaker 2 with 0.4 mm nozzle was applied for preparing both tensile and flexuralspecimens. Line width: 0.35 mm - layer height: 0.2 mm - Printing speed: 15 mm/s -retraction distance and spe...Buy from Store 0 0 -
$8Sample - Reflow Recycled PLA - The Mandala CollectionFlexural strain at break % 3.6 ISO 178SAMPLE PREPARATION AND TESTING CONDITIONSSample preparation conditions:Ultermaker 2 with 0.4 mm nozzle was applied for preparing both tensile and flexuralspecimens.Line width: 0.35 mm - layer height: 0.2 mm - Printing speed: 15 mm/s -retraction distance and spee...Buy from Store 0 0 -
$8Sample - Gsun Bi-Colour Gradient Silk PLA FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0 -
$8Sample - Gsun Dual-Colour Silk PLA FilamentWant to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go. - These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.- These spools are exposed to mois...Buy from Store 0 0
×