Sample - Gsun Tri-Colour Silk PLA Filament
Want to try a colour or material first before you commit to a full roll? Here is your chance to get a 50 gram sample of it first to give it a go.
- These are off cuts from a full spool so do have a tendency to tangle. We recommend re spooling them onto an old spool.
- These spools are exposed to moisture. We recommend drying the filament out first before use.
- The orientation of filament when loaded into your 3D printer will impact what your final print looks like. While we do not expect the filament to twist during printing, should it twist, this will also impact your final print result.
Looking to create visually striking 3D Prints, then give tri colour filament a try! Achieve a silky gloss like finish on your 3D prints that have a blend of 3 colours. Unlike rainbow filament where the colour change is transitional with the colour changing over time, tri colour filaments allow you to achieve 3 colours across each layer. As a result, you will be able to notice the different colours from various angles when looking at your 3D printed design.
Please refer to images as a guide.
Note, the orientation of filament when loaded into your 3D printer will impact what your final print looks like. While we do not expect the filament to twist during printing, should it twist, this will also impact your final print result.
We recommend initially printing a calibration coin to understand how the tri colour filament will colour change on your particular printer.
Model No.：Tri Color Silk Magic PLA
Diameter Format：1.75mm
Print Temp.：190-220℃
Tolerance：±0.05mm
Print Speed：50-100mm/s
Platform Temp：no need
N.W.：1KG
Length：1.75mm(1KG)=330m
Tensile Strength：11-16KGF
Melt Flow Rate：4-8g/10min(190℃,2.16kg)
DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.