90 x 50 Degree 1 Inch Throat Horn Flare | H6512

High quality ABS horn flare with a standard 1.⅜ inch (35.6mm) screw on thread. Based on the Daytona H6512 horn, it has a nominal 90° horizontal and 50° vertical pattern. You can attach bolt on compression drivers to this horn flare using our mounting plate adaptor.

- Outside dimensions 303 x 162
- Panel cut out dimension 255 x 125
- Depth behind panel (without driver) 115mm
- M6 mounting holes with recess
- Minimum operating frequency 1kHz
- 90°H and 50°V pattern
- 6.5mm thick ABS plastic