Little Giant TE-4-MD-HC magnetic drive pump 230v for fluids to 93°C 54 lpm

Capacity: 14.2 gpm @ 1'
Shut Off: 24.3' (7.4 m)
Max. Liquid Temp: 200 °F (93.3 °C)
Discharge: 1/2" MNPT (12.7 mm)
Impeller: Glass-filled polyphenylene sulfide w/ carbon bushing
Electrical: 230 V, 50/60 Hz, 0.5/0.7 A
1/10 hp open TEFC PSC motor
Glass-filled polyphenylene sulfide magnet housing and volute
1.1 specific gravity
Fluoroelastomer (FKM) oring
Ceramic thrust washers and shaft
Run dry capability up to 8 hours
When it comes to choosing a chemical transfer pump, it's all about compatibility with the fluids you will be pumping
From highly corrosive acids solutions and solvents to sterile solutions and other abrasives, the TE-4-MD-HC is ideal for heavy use and is a steady performer in the effortless transfer of highly corrosive fluids
The TE-4-MD-HC Series features leakproof, seal-less magnetic drives and is designed for in-line, non-submersed use
Built to outlast high corrosives and temperatures, the TE-4-MD-HC is equipped with an open, totally enclosed fan-cooled split capacitor motor with sleeve bearings and chemical-resistant components.
It also has a run-dry capability of up to 8 hours