Cps 1 views Claim this Business♡

These fittings are used to connect up a male BSP taper thread to the Ralston system. Only available in 1/8 and ¼ BSPT at this time. Thread tape and a spanner needs to be used to get a perfect seal. Please click on the options tab above to get the pricing for the fitting you

These Male BSP taper adaptors come only in Brass and are rated for use up to 5000 PSI (with no check valve installed); they are used for connecting your female BSPT thread to our Ralston quick test system. By having the Ralston system you can then use a Ralston hose to connect to your calibrator.

These fittings are for the connection of items that have a female BSP parallel thread ie a Druck pressure module, Many of the druck products use BSP parallel thread so this is a good option. The 1/8 is the most common and then allows you to connect in a hose or go to another fitting

Product code: QTHA-xFBA

These fittings are great for connecting threaded pressure gauges to the Ralston system. Used extensively with our comparator for gauge testing. We also use a lot in use in our own pressure lab. These fittings save a lot of time. Uses an o-ring seal to make a leak tight seal, Hand tight right up to

Product code: Bulkhead Unions

Also talk to us about making up a specific calibration kit for you to rent, this is our specialty. We combine all the devices together into one kit and make sure it all connects together, saving you time. Check them out here. Product code: CPS

Ametek Crystal XP3i Intrinsically Safe pressure gauge: industry-standard features, doubled accuracy, Bluetooth connectivity. 

Quick-test seal any male Quick-test adapter to 5000 PSI (345 bar). They install on any Quick-test adapter for permanent installation in the field. This allows you to leave your ralston fitting in your system while it is in use and then when you are ready to carry out a calibration just undo

These fittings are used to connect to a Male BSP parallel thread; sealing is down by a Dowty washer or a copper washer. A spanner is needed to get a leak tight seal. A really great fitting to leave installed on your pressure module or connected to your pressure calibrator like the MC5 or MC6.

These female fittings are for the quick connection of pressure gauges and other instruments that have a male BSP parallel thread. They use no thread tape to get a seal but use an o-ring as the sealing mechanism to make a leak free seal. We use a lot of these here at CPS in our

Page under construction. Please for more information, or click on the link to the Hart website to view the product. Product code: 1523/1524