Deep Sea Trade 1 views ♡

Includes 2 featherboards.- Featherboards provide consistent lateral pressure of workpiece against fence system.- Suitable for router tables, bandsaws and tablesaws with T-track systems.- Stackable - we use 4 pieces for bandsaw milling for depths over 150mm.- Includes:- 2x featherboards - 216mm x 165mm x 16mm high- 2x M6 x 70 flat & dome screws- 4x M6 x 40 flat & dome screws- Bearing washers

Set of 3 Narex Premium Woodline Plus Chisels.6mm (811606)8mm (811608)12mm (811612)Probably the best woodworking chisel..Inovative chisel with improved cross-section of the blade that minimises friction when cutting into wood. Improved grinding of the edges creates expecially thin sides which are in ...

Narex Premium Woodline Plus Chisels.16mm (811616)Probably the best woodworking chisel..Innovative chisel with improved cross-section of the blade that minimises friction when cutting into wood. Improved grinding of the edges creates especially thin sides which are in particular needed in dovetailing...

Probably the best woodworking chisel. Set includes 8, 10, 16 and 32mm bevel edge chisels.Inovative chisel with improved cross-section of the blade that minimizes friction when cutting into wood. Improved grinding of the edges creates expecially thin sides which are in particular needed in dovetailin...

Set includes 8, 10, 16 and 32mm bevel edge chisels.Features:- forged from alloyed Cr-Mn steel- heat treated up to 59 HRc- fully ground and sharpened- thin sides for sidewall clearance- ergonomic handle with oval cross-section- opening hole for hanging

Set includes 1/4", 1/2", 3/4" and 1" crank-neck bevel edge chisels.A cranked neck paring chisel is a specialized woodworking tool used for fine, controlled paring cuts in hard-to-reach areas. The key feature is its offset (cranked) handle and shank, which keeps your hand clear of the surface while c...

Narex Premium Woodline Plus Chisels.50mm (811650)Probably the best woodworking chisel..Innovative chisel with improved cross-section of the blade that minimises friction when cutting into wood. Improved grinding of the edges creates especially thin sides which are in particular needed in dovetailing...

Useful woodworking tool designed primarily for cutting and cleaning out box joints and similar joinery. Used for:- Cleaning out box joints and dovetails with precision.- Precise squaring of mortises or other deep recesses to 90degrees.- Trimming and fitting joints where straight, accurate edges are ...

Designed for cleaning and fine-tuning dovetail joints. It has unique features that make it ideal for working in the tight corners of dovetails without damaging the surrounding wood. Used for:- Cleaning and refining dovetail joints to ensure a perfect fit.- Removing waste material from the tight corn...

Designed for cleaning and fine-tuning dovetail joints. It has unique features that make it ideal for working in the tight corners of dovetails without damaging the surrounding wood. Used for:- Cleaning and refining dovetail joints to ensure a perfect fit.- Removing waste material from the tight corn...

Available for pickup in Auckland only.Set includes:- 2x 3000mm HGR20 Rails- 4x HGH20CA bearings- 4x grease ports- Rail dust capsHGR series offer high rigidity and precision accuracy in linear motion, the carriages can carry large vertical, horizontal and torsional loads with no deformation.HGR Linea...

Available for pick-up in Auckland only.Set includes:- 2x 3000mm HGR25 Rails- 4x HGH25CA bearings- 4x grease ports- Rail dust capsHGR series offer high rigidity and precision accuracy in linear motion, the carriages can carry large vertical, horizontal and torsional loads with no deformation.HGR Line...

Helical Cutter Head upgrade for the DW735 thicknesser with 45 inserts and true helical shape (not spiral!).I personally use this cutter head and have been running hard walnut, matai and hard american maple. Previously my HSS straight cutter blades would quickly dull on hard woods with fine cuts betw...

Bench leg vise hardware kit. This kit is used to build vertical leg vises to the leg of table for clamping materials / supporting work pieces.The scissor arm ensures the vise face remains vertical and level under clamping pressure.Operated through use of a turn handle.Please note this will require i...

1 set of replacement blades for the DW735 thickness - 3 pieces made from high speed steel (HSS).Blades can be flipped at the end of their life.Please note these are generic non-branded replacement blades.

Heavy duty 90-degree V-groove router bit.Great for cutting deep v notch grooves, blades can be flipped at the end of their life. I supply replacement carbide inserts for $8 each.- Shank diameter = 1/2"- Notch angle = 90 deg- Max cut depth = 30mm- Max cut width = 60mm- Tungsten carbide inserts

Set includes:- 2x 1000mm HGR20 Rails- 4x HGH20CA bearings- Rail dust capsHGR series offer high rigidity and precision accuracy in linear motion, the carriages can carry large vertical, horizontal and torsional loads with no deformation.HGR Linear rail can be used over long distances where high preci...

Set includes:- 2x 1500mm HGR15 Rails- 4x HGH15CA bearings- 4x grease ports- Dust capsHGR series offer high rigidity and precision accuracy in linear motion, the carriages can carry large vertical, horizontal and torsional loads with no deformation.HGR Linear rail can be used over long distances wher...

Set includes:- 2x 1000mm HGR15 Rails- 4x HGH15CA bearings- 4x grease ports- Dust capsHGR series offer high rigidity and precision accuracy in linear motion, the carriages can carry large vertical, horizontal and torsional loads with no deformation.HGR Linear rail can be used over long distances wher...

Compatible with the DW735 thickness planer.Includes fixings to bolt onto existing base and folds upwards when not in use.Weight 3.5kgReduces snipe and provides additional infeed and outfeed support.Pack includes 2 folding tables and fixings.

Suitable for MFT tables with 20mm diameter dog holes. Great for clamping mid table which is tricky with standard clamps.Multiple applications and works great with custom jigs. I often use it as a quick fence for my router insert jig.Made from galvanised steel with quick release mechanism, these clamps make quick work of moving workpieces and clamping down.

Suits 65mm diameter trim routers such as the Makita DRT50.- Made from thick solid cast aluminum- Lift insert works via solid HGR20 linear rail and threaded rod assembly with no horizontal flex. Lift assembly allows for fine micro adjustment.- Height adjustable by hex screw with locking mechanism.- D...

Maximize surface area and strength of box corners with ease. Suitable for stock timber thicknesses of 18-30mm.Recommend using in a fixed router table set up.Specifications:Shank = 1/2" / 12.7mmCut diameter = 55mmCompatible board thickness = 18-30mmCutterhead material = Tungsten carbide

10m anti-static dust hose.Note this is not a branded hose.- Compatible with festool / mirka vacuum and tools- 36mm outer diameter main body- 57mm outer diameter vacuum port & 27mm inner diameter tool port- High strength body- Woven fabric outer shell