Drill Connex 2 views Claim this Business♡
×-
$2,225Pagani Geotechnical 75m Digital Cable - Piezocone Drill ConnexPiezocone Cable, 75m length.Buy from Store 0 0 -
$59.95C000561 Rod Ø20 X 1000mm, M14 (for DPM/DPL) Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$199.82DMT Steel Ring for Membrane Drill Connex NZThe DMT steel ring holds the membrane and the gasket of a DMT blade. It is fixed with screws to the blade. Weight: 0.053kgDimensions: 5mm x 80mm x 80mmBuy from Store 0 0 -
$108.99DMT Flusher to terminal male Drill Connex NZThe DMT Flusher to terminal male is a useful tool for cleaning the pneumatic conduit of electric cables and the Prolub of a SDMT probe.Use is recommended when dirt is inside the above mentioned components, generally occurring after the DMT membrane rupture.The tool must be used only after removing t...Buy from Store 0 0 -
$228.85C002234 Rod 36mm X 1000mm 2P with friction reducer Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$9,754C000853 Hydraulic thrust selector with load cell 20 ton Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$108.99DMT Continuity Tester Drill Connex NZThe DMT continuity tester is used to check electrical continuity and isolation of components of the DMT blade and of the pneumatic electric cables. Weight: 0.029kgDimensions: 3mm x 65mm x 40mmBuy from Store 0 0 -
$74,426.75Air Compressor Electric 900CFM / 300PSI Drill Connex NZThe Air Connex 900CFM/21BAR Portable two stage electrical air compressor offer high efficiency motors, high reliability, IP54 protection level, insulation grade (F) , and they also strictly comply with the NEMA and IEC standards. These Air Compressors also offer: energy-saving, low maintenance costs...Buy from Store 0 0 -
$7.27DMT Washer for sensing disc extractor Drill Connex NZBlack washer for holding the screw of the DMT sensing disc extractor. Weight: 0.001kgDimensions: 1mm x 8mm x 8mmBuy from Store 0 0 -
$781.10DMT Pressure gauge of 80 bar Drill Connex NZThe DMT pressure gauge of 80 bar (1160 psi) is the high scale pressure gauge of the DMT Control Unit, for taking DMT readings when the automatic acquisition is not used.This spare gauge is supplied with pneumatic fittings for rapid replacement in the DMT Control Unit. Weight: 0.463kgDimensions: 90mm x 105mm x 105mmBuy from Store 0 0 -
$287.02C000637 Helical Rod 63mm x 1000mm, E.22 Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$899.17DMT Pressure Gauge Drill Connex NZThe pressure regulator is used to reduce the pressure supplied by a gas tank (max 400 bar) to the DMT Control Unit (normally 40 bar, max 80 bar).The cable for connection with the DMT Control Unit is included. Weight: 2.3kgDimensions: 160mm x 170mm x 210mmBuy from Store 0 0 -
$16.35DMT cap for terminal male connector Drill Connex NZThe alluminium cap for the DMT terminal male connector is used to protect it against dirt, water and accidental impact with other components. Important Note: The aluminium cap for terminal male is not designed to check air tightness and will explode with minimum pressure. Use the closed ended terminal for checking air tightness. Weight: 0.006kgDimensions: 15mm x 15mm x 25mmBuy from Store 0 0 -
$23.61Galvanometer for SDMT Control Unit Drill Connex NZThe Galvanometer is a component on the panel of the latest version of the Marchetti SDMT control unit.It provides the status of the DMT contact, just like the DMT buzzer.When the DMT contact is OFF, the Galvanometer indicator is on the red side and the buzzer is OFF. When the contact is ON, the indi...Buy from Store 0 0 -
$41.98C000903 Hexagonal centering ring 36mm Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$54.50DMT Membrane 0.25mm Drill Connex NZDMT Membranes of 0.25 mm thickness are the standard membranes for DMT testing.Their intermediate thickness provides a good compromise between sensitivity and robustness to damage and wear which occurs when testing. Weight: 0.01kgDimensions: 5mm x 80mm x 80mmBuy from Store 0 0 -
$254.31DMT Upper Slotted Adaptor double Drill Connex NZThe DMT upper slotted adaptor enables the lateral exit of the pneumatic electric cable during penetration.The thread of the adaptor is the Double Conical thread of rods that may be supplied by Pagani and Geomil. Weight: 0.44kgDimensions: 36mm x 36mm x 110mmBuy from Store 0 0 -
$29.38C000560 Nipple for Casing Tube 48mm diameter Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$148C002227 Adaptor from Piezocone to 2P rods Drill Connex NZC002227 CPTu Rod Adaptor, Female M28 x 2, Double Threaded FemaleBuy from Store 0 0 -
$149.16C000937 Brake for helical rod diameter 63mm x 100mm Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$299.06C004127 Helical Rod for Anchoring 300mm E.27 Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$191.42C000310-Helical Rod Bit, 100mm, E.27 Drill Connex NZItem price does not include shipping or 15% GSTBuy from Store 0 0 -
$3,500Electric Air Compressor - used Drill Connex NZAtlas Copco Electric Air Compressor for sale. In excelent working condition and has always been serviced by a qualified technician.This unit has been used to supply air to a Drill Bit Grinding machine and is now surplus to our requirements. This unit is located at ourt Auckland Warehouse. Considerin...Buy from Store 0 0 -
$127.16Tool for handling inner ferrule of male terminal Drill Connex NZThe Marchetti tool for handling the inner ferrule of a Male Terminal is necessary to construct the terminal male joint. Weight: 0.18kgDimensions: 10mm x 10mm x 50mmBuy from Store 0 0
×