Ecoinnovation 30 views ♡

We supply this UV rated solar PV wire by the 100m roll or in 5m increments.We stock this wire in red and black outer sheath colours.Continuous rating is typically about 32 amp is free air or 24 amp if in insulation or protected in plastic conduit.For more information on wire cable rating read our gu...

We supply this cable by the 100m roll or in 5m increments.We stock this wire in green only.Continuous rating is typically about 48 amp in free air or 29 amp if in insulation or protected in plastic conduit.For more information on wire cable rating read our guide.This robust and corrosion resistant w...

We supply this red and black cable by the 100m roll or in 5m increments.Continuous rating is typically about 52 amp in free air or 31 amp if in insulation or protected in plastic conduit.For more information on wire cable rating read our guide.This wire has many applications in renewable energy appl...

We use these MC4 type connectors on our hydro turbines and our React solar water pumps. They provide a waterproof durable connection when used with 4mm² solar PV wire.They are sold in male and female pairs and can be attached to the wire with any good 4mm² barrel crimp tool. We have a video showin...

These MC4 type connectors can be mounted on a flat material surface by drilling a 12mm hole. They are often used to connect PV panels to waterproof PVC enclosures.They are sold in male and female pairs and can be attached to the wire with any good 4mm² barrel crimp tool.Note : if wiring your own sy...

These crimp lugs are sold in packs of 10. The price is for 1 pack of 10.We stock a limited range of copper tin plated crimp lugs. The code refers to the cable size in mm² – bolt hole size in mm.- 10-8- 25-8- 35-8- 50-8- 70-10We also sell a basic low cost crimp tool for crimp sizes up to 50mm.Note...

Bi-metal lugs are used to convert aluminium wire to copper bolt lugs.We stock (wire size mm² – bolt size mm):25-8 bi-metal lugs35-10 bi-metal lugsWe also stock straight connectors/joiners for the same wire sizes (mm²):25 aluminium joiner35 aluminium joiner25 bi-metal joiner35 bi-metal joinerYou...

We stock a low cost DIY crimping tool for 6,10,16,25,35,50mm²- Material: Steel- Model: HX-50B- Setting Levels: 6/10/16/25/35/50mm²- Length: Approx. 390mm- Weight: Approx. 1.3kgNote : if wiring your own system in NZ, you can do so for voltages up to 120 VDC (ELV) if you have suitable knowledge and...

We offer a large range of chrome plated bus bars for ELV applications. Each bus bar measures 40mm wide by 4mm thick with an M8 tapped hole every 20mm. Bars are conservatively rated at 350 amps each. For 600 amp rating run two together on top of each other.Each bar comes with a stainless steel M8 bol...

This 2-core 6mm^2 (per conductor) copper wire is perfect for many general ELV wiring applications in your off-grid system.Good for up to 52 amps. Read our wiring guide for more informationNote : if wiring your own system in NZ, you can do so for voltages up to 120 VDC (ELV) if you have suitable know...

We supply this cable by the 100m roll or in 5m increments.This wire has a red outer sheath (we no longer have the white outer sheath). Inner wire colours are red and black.Continuous rating is typically about 28 amps in free air or 17 amps if in insulation or protected in plastic conduit.For more in...

This 2-core 10mm^2 (per conductor) copper wire is perfect for many general ELV wiring applications in your off-grid system.Good for up to 70 amps. Read our wiring guide for more informationNote : if wiring your own system in NZ, you can do so for voltages up to 120 VDC (ELV) if you have suitable kno...

We have a limited supply of 500m rolls of this wire and some shorter lengths in stock. Please if you require a short length.This wire is available on this website for the express purpose of providing cost effective wire (below RRP) to our clients buying or owning our hydro turbines. If you are inter...

This 50mm2 fine stranded tinned copper battery wire in great for battery connections in off-grid jobs. It is double insulated wire and great for ELV high current battery/inverter applications. It can be used in applications up to 150 amp. Follow the advice of the battery and inverter manufacturer wh...

These 50mm2 battery links are great for connecting battery strings together.Sure beats making up your own. Hole diameter suits 8mm (or 5/16") bolts, and distance between holes is 200mm. These links will fit most makes of L16 lead acid batteries.Note : if wiring your own system in NZ, you can do so f...