DUROARC 309MoLT1 1.2mm 12.5kg

AWS A5.22 E309LMoT1-1

DuroArc 309LMo was designed for welding type 316 clad steels on the first pass in cladding steels or for welding dissimilar metals such as molybdenum-containing austenitic stainless steels to carbon steels. It provided greater corrosion resistance at elevated temperatures than 309L and gave the better crack resistance.

Typical application: It is used in paper mills and in power plants to give greater corrosion resistance.

Welding Positions: Flat, Horizontal, Vertical up, Vertical down, Overhead

The oil stains and rust on the weldments should be cleared away.
Designed for welding with 100% Co2.
When welding, the gas flow rate is generally 20~25L/min.

SPECIFICATIONS

Weld Deposit Properties:
Tensile Strength: 650 MPa
Elongation: 40%

Spec Sheet: DUROARC 309LMo Wire.pdf