Everlast 1 views Claim this Business♡

9 series Flex Neck Torch Head replacement for NOVA WP-9 series Air-Cooled TIG Torches. - Type: TIG Welding Torch Head and Handle- Style: Flexible Neck- Model: WP-9F- Amps: Up to 125 amps- Material: Brass, Plastic- Cooling Mode: Air-Cooled- For 9 series TIG Torches

26 series Rota-Flex Torch Head replacement for NOVA RF-26 series Air-Cooled TIG Torches. - Type: TIG Welding Torch Head and Handle- Style: 360 Degree Rotation- Model: RF-26- Amps: Up to 200 amps- Material: Brass, Plastic- Cooling Mode: Air-Cooled- For 26 series TIG Torches

18 series Rota-Flex Torch Head replacement for NOVA RF-18 series Water-Cooled TIG Torches. - Type: TIG Welding Torch Head and Handle- Style: 360 Degree Rotation- Model: RF-18- Amps: Up to 350 amps- Material: Brass, Plastic- Cooling Mode: Water-Cooled- For RF-18 series TIG Torches only- Will not fit WP-18 and WP-18F series TIG Torches

9 series Rota-Flex Torch Head replacement for NOVA RF-9 series Air-Cooled TIG Torches. - Type: TIG Welding Torch Head and Handle- Style: 360 Degree Rotation- Model: RF-9- Amps: Up to 125 amps- Material: Brass, Plastic- Cooling Mode: Air-Cooled- For 9 series TIG Torches

20 series Rota-Flex Torch Head replacement for NOVA RF-20 series Water-Cooled TIG Torches. - Type: TIG Welding Torch Head and Handle- Style: 360 Degree Rotation- Model: RF-20- Amps: Up to 250 amps- Material: Brass, Plastic- Cooling Mode: Water-Cooled- For RF-20 series TIG Torches only- Will not fit WP-20 and WP-20F series TIG Torches

- 110 Amp DC and 80 Amp AC @ 100% Duty Cycle- Air-Cooled- Rotary (swivel) Head rotates 360°- 25 ft (7.5m) Ultra Flexible silicone cable- 35 series DINSE connector with quick disconnect- Offset and rotation feature allow easier use in corners and tubing- Consumables interchange with other 9 and 20 ...

- 350 Amp DC and 250 Amp AC @ 100% Duty Cycle- Water-Cooled- Rotary (swivel) Head rotates 360°- 25 ft (7.5m) Ultra Flexible silicone cables- 35 series DINSE connector with quick disconnect- Offset and rotation feature allow easier use in corners and tubing- Consumables interchange with other 17, 1...

Ground Clamp provides tight grip and strength at ground contact points. - Up to 300 Amps of service use- 10 ft. cable with 35 DINSE connector (35-50mm / 35-70mm)- Measures 1/2" across connector end pin- Fits Everlast and other brand units with 35 DINSE connector on board

This heavy-duty brass ground clamp is engineered for reliable grounding and long-term durability. Made from a high-conductivity 98% copper brass alloy, it ensures minimal resistance and maximum current flow. The high-tension spring delivers a strong grip, keeping your connection solid and safe throu...

Everlast 24 Series Mig Gun - Rated at 250 Amp CO2 / 220 Amp mixed gases @ 60% Duty Cycle- Major torch parts and consumables interchange with Binzel® MB24KD Trafimet® ErgoPlus 24- 5M/15FT long cableBest Suited For: - Power i-MIG 230i- i-MIG 253DPi- Fits all Everlast Power i-MIG units with a Euro Quick connector

- Straight handle with flex neck design with 25 ft Ultra flex cable- Air-cooled- Rated: 250 Amps DC; 160 Amps AC @ 60% Duty Cycle- Complete with standard 1/2" 35 series DINSE style connector- 2T/4T remote contactor (finger switch) and quick disconnect gas fitting- Includes small consumable starter ...

- Standard handle, flex neck design- Water-cooled- Rated: 350 Amps DC, 250 Amps AC @ 100% Duty Cycle- Complete with 1/2" 35 series DINSE style connector- 2T/4T remote switch included (finger switch on torch) and quick disconnect gas fitting- Includes small consumable starter pack- Good for sustaine...

- Standard handle, Flex neck design. Flex cable- Water-cooled- Rated 250 Amps DC, 175 Amps AC @ 100% Duty Cycle- 2T/4T remote contactor switch included- Complete with 1/2" 35 series DINSE style connector- Quick connects for gas and water lines for use with Everlast Coolers and some other Cooler bra...

Welders aren't cheap and they are an investment. So, take care of it. This cover will help keep your unit new looking. It also protects the unit from scratches in storage and keeps out most unwanted dirt and debris. You do not need to remove cables or fittings to install this cover, but never operat...

Welders aren't cheap and they are an investment. So, take care of it. This cover will help keep your unit new looking. It also protects the unit from scratches in storage and keeps out most unwanted dirt and debris. You do not need to remove cables or fittings to install this cover, but never operat...

Welders aren't cheap and they are an investment. So, take care of it. This cover will help keep your unit new looking. It also protects the unit from scratches in storage and keeps out most unwanted dirt and debris. You do not need to remove cables or fittings to install this cover, but never operat...

- Standard handle, Flexible neck / head design- Air-cooled- Rated 125 Amps DC, 80 Amps AC @ 60% Duty Cycle- Complete with 1/2" 35 Series DINSE style connector- 2T/4T remote contactor (finger switch) and quick disconnect gas fitting- Includes small consumable starter pack. Contents may vary. Tungste...