Fencequip 77 views   2 clicks Claim this Business♡

Our Down-the-Hole (DTH) Hammer is designed for use in hard or un-fractured rock, delivering powerful and precise performance in demanding ground conditions3.5" DTH Hammer - compatible with both 4" and 6" head sizesMast Gate to enhance drilling accuracy185 CFM Air Requirement2" Hex DriveMade to fit multiple brands of Post Drivers, Vibes and Auger DrivesExcavator and larger Hammer options available

Our Pile Drivers are controlled from the Excavator Cab, allowing you to drive a Pile as far as the Digger can reach.150 UC37 Mast Block weights available - 250kg, 300kg, 350kg & 400kgGrapple and Side Tilt availableCall us to discuss your Pile Driving needs and what we can build for you

Our Pile Drivers are controlled from the Excavator Cab, allowing you to drive a Pile as far as the Digger can reach.200 UC60 Mast Block weights available - 500kg, 750kg, 1000kg & 1200kgGrapple and Side Tilt availableCall us to discuss your Pile Driving needs and what we can build for you

The Flights are built using 6mm Swedish HARDOX 450 Steel.The Shafts are made from High Tensile Steel TubePermanent Head with Interchangeable TeethSizes Available:100mm, 125mm, 150mm, 175mm, 200mm, & 125/175mmDouble SidedAugers can be built to suit your Auger Drive Motor - hex, square or round

The FENCEQUIP Rock Monster Auger flights are built using 8mm Swedish HARDOX 500 Steel. (They will last 130% longer than the 6mm 450 used in the FENCEQUIP HARDOX Augers)The Shafts are made from Solid HARDOX 400Interchangeable Head with interchangeable TeethDouble first flight also helps to reduce wea...

- for hard and compacted soilThe Raptor Auger flights are built using 8mm Swedish HARDOX 500 SteelThe Shafts are made from Solid HARDOX 400Sizes Available: 100mm & 150mm - other sizes available on requestAugers can be built to suit your Auger Drive Motor - hex, square or round

Available for 4.65m or 4.95m MastsWe have designed the to have a smooth operation from parked to straight, making it very user friendly and safe.Benefits Include: - Allows you to have a taller mast and still be able to drive your tractor down the road and be under road legal height​- Great for man...

MD - 300mm of TravelHD - 410mm of Travel (with or without Hydraulic Feet)allows you to move the Post Driver forward and backwards when Side Mounted and left to right when Rear Mounted. This means if you do not park the tractor in the right place you can move the Post Driver to the mark without havin...

We were approached by a number of Fencing Contractors in the lower South Island to design and build an upgrade for securing Rock Spikes, Auger Motors and Posts, when trying to navigate through hard/rocky ground.Features Include:- 4 Post Locating Pins- 5 Chain Hook Heights- Twin Guide System to Hold ...

Pin & Chain Hook Brackets are the mini version of our High Country Twin Guides and gives you the ability to use Pins, Chains and your Post Cap to control Posts.This system takes a lot of strain off your Post Cap for longer wearing.This system can be bolted to any Post Driver with an I-Beam Mast.

- Allows you to rotate the Rock Spike with a pull of a lever- MD, HD & SHD models available- 90mm & 120mm Rock Spikes available in either solid or hollow with a hardened tip - MD/HD 1600mm Long - SHD 1750mm Long- 8 Tonne of Lift- MD/HD 1400mm of travel depth- SHD 1550mm of travel depth- Available in...

This option is great for people that need to Rock Spike as well as Drill.- The Auger head is easily mounted with 3 bolts- 2500Nm of torque at 2500psi- Auger Motor protected by a large steel hood- Telescopic extension available- Auger Motor can be mounted on a Excavator- Compatible with High Country Twin Guides​

- Auger Extractor has 8 Tonne of lift and includes a Post Lifting chain hook- Hydraulic Turning available in both Near Side (operators) and Far Side- MD/HD 1400mm of travel depth- SHD 1550mm of travel depth- High Torque Planetry Drive Motor - 2500Nm of Torque at 2500 PSI- Compact design- Compatible with High Country Twin Guides

Our are made out of 8mm High Tensile Hardox Wear Plate and include Ultra High Tensile 3.2mm Hardox Guards to protect rams, hoses and fittings.- 175mm Lift- 4 Tonne of power per foot

The a must when contracting. It has the ability to lift anything you can fit a chain around and has 6 Tonne of lifting power.It allows you to pull out old broken strainers and replace them with new ones without re-positioning the tractor. This makes it extremely good for repair work.Even when using ...

s work well working in areas where you do not want to damage/tear up the ground e.g. working in vineyards or orchards where you do not want to damage the tree's roots.They also work well on hill country rolling over the ground rather than pushing the tractor around. ​​

What makes this Side Mount different?The Post Driver/Side Mount unit is attached with a set of forks on the tractor that enables the user to pick up the Post Driver/Side Mount from either side or the rear of the machine. When in any of these three positions the Side Mount still has the ability to hy...

The a proven system for fencing in a range of conditions Key Features:- The allows you to drive down a fenceline and extend out to each post - while allowing you to take all your gear with you in the large tool box and multiple tool carriers ie spade, hand rammer and reeling/wire jennies.- This mach...