Firebrandaerorc 24 views Claim this Business♡

Multi-purpose gap filling canopy glue.Thick and tacky, dries clear, remains flexible.Bonds combinations of wood, plastic, fabric, foil, painted surfaces.Ideal for:- Model boat plastic windows- Sealing gaps and small holes- Repairing tears in covering film- Application of rivets on scale models

Fast drying PVA dispersion adhesive for classic model aircraft construction and general hobby use. For bonding wood, paper, Styrofoam, cork,., works especially well for bonding porous materials. Supplied in optimum consistency for direct use without any dilution. The cured adhesive is resistant to m...

Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with...

Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with...

The surface properties of some materials, such as being acidic or having very low moisture content, slow down the curing of cyanoacrylates.CA accelerator is formulated to harden CA in ten seconds or less.

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE...

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting o...

500mlLaminating and finishing resin for balsa and foam models.Eze-Kote is a 1-part water based foam-safe, low odour, resin alternative to epoxy. Brush onto balsa and light glass cloth to create a tough, ding and fuel resistant film that can be sanded easily and painted after 20-30 mins. 500ml bottle. Coverage: 75ml covers approx 1m2 /coat.

50mlGlue 'n' Glaze and has been developed specifically for use with clear plastic parts his liquid plastic film-forming polymer bonds most plastics and dries to crystal clear film. It won't smear or fog clear plastics which also makes it suitable for use on scale aircraft, plastic canopies. - Bonds ...

50mlThe thin, non-fuming cyano alternative. - Low odour, water clean up.- Penetrates much further than other glues.- Provides better joints on balsa, ply, GRP, plastic hinges, foam and carbon fibre

50gMilled fibres are simply stirred into epoxy and polyester resins to thicken and improve their toughness, flexural strength, crack resistance and dimensional stability.They can also be used with thin cyanoacrylate by simply adding a couple of drops of thin penetrating ca (e.g. Roket Hot) to the Milled Fibre which will produce an extremely adhesive, hard & tough material.

240mlStrong, lightweight filler which sands easily. Use only where a strong joint is not required. Use for grain filling by applying with plastic sponge.Bonds: wood, foam, fibreglass.

Left & Right Wing - Up to 5 connections per side.

560 dries clear making it the perfect glue to use for attaching airplane canopies and vacuum formed ABS parts. The excellent shock resistant flexible bond means your airplane parts will stay put even when subject to high vibration and extreme speeds. 560 is also an excellent craft glue. The nontoxic...

Cyanoacrylates (CAs) have become the adhesive of choice for most hobby and household applications. High quality CAs such as INSTA-CURE™, when used properly, form bonds that in many cases are stronger than the material that is being adhered. INSTA-CURE™ is a highly refined CA which, combined with...

Can be used with plastic's, woods & metals

Crisp, clean lines with this premium tape

Crisp, clean lines with this premium tape

Loctite Hysol E-120HP high viscosity industrial grade epoxy adhesive for extended operation. After mixing, room temperature curing two part epoxy adhesive, can form a strong amber bond area, excellent impact resistance and tensile properties. Appearance Color: Amber Packing size: 50ml Hardness: 76D ...