Fleet Australasia 1 views   1 clicks Claim this Business♡

Pack of 5 blue cone nozzles for use with the Kombi line markers and low volume paints. Pressure 60psi. Flow rate: approx. 300ml/minute.

Pack of 5 yellow cone nozzles for use with the Kombi line markers and low volume paints. Pressure 60psi. Flow rate: approx. 110ml/minute. Use with 100mesh top hat filter

Pack of 5 pink cone nozzles for use with the Kombi line markers and low volume paints. Pressure 60psi. Flow rate: approx. 190ml/minute. Use with 100mesh top hat filter

Found underneath the bonnet of the Kombi Orange, located to the left of the manifold as you look inside the machine from the front.

Pack of 5 white cone nozzles for use with the Kombi line markers and low volume paints. Pressure 60psi. Flow rate: approx. 160ml/minute. Use with 100mesh top hat filter

Found inside the bonnet of the Kombi Orange.

Stainless Steel 110° nozzle for use with the Kombi line markers and low volume paints. Used for marking lines 2" and wider. Pressure 30psi - Flow rate: approx. 310ml/minute.

For charging the docking battery found on the Kombi Orange, BeamRider and MAQA markers.

Brown 110° flat fan spray nozzles for use with ride on machines. Used for marking lines 2" and wider. Flow rate: approx. 2.0 litres/minute. Pack of 5.

Portable docking battery allowing charging to take place where ever you have a standard 240v supply. Found on the Kombi Orange, MAQA and BeamRider machines.

White 110° flat fan spray nozzles, for use with ride on machines. Used for marking lines 2" and wider. Flow rate: approx. 3.2 litres/minute. Pack of 5.

Orange 110° flat fan spray nozzles, for use with Kombi spray markers. Used for marking lines 2" and wider. Flow rate: approx. 0.4 litres/minute. Pack of 5.

Control panel found on the Kombi Orange, allows the machine to be switched on or off, gives battery status indication and gives the user the ability to switch modes.

Yellow 110° fan nozzle tip. For use with Kombi spray markers. Used for marking lines 2" and wider.

Found in the Kombi 3 and Orange the Manifold allows the pressure to be adjusted to suit marking conditions.

Blue 110° fan nozzle tip. Recommended for use in Kombi line marker. Used for marking lines 2" and wider. For use on grass.

Yellow 80° fan nozzle tip. Used for marking lines under 2" in width.

found on the pressure manifold on the Kombi 3 line marker.

Fitted to the paint/water tap allows the clear hose to make a clean line to other connections.

Bulkhead connector for all Kombi models.

The Complete Nozzle Assembly is made up of all the parts that make up the front end spray system, they come assembled so all you have to do is plug in and spray. It can be lifted off the Kombi and used for free hand marking such as corner quadrants, penalty spots

The Equal Tee protrudes from the pump and splits the feed to the left and straight ahead allowing the flow to be re-circulated if need be.

The Return Tap allows the paint flow to be cut off from the spray nozzle and pumped back in to the main tank, this helps mix the paint if need be.

This small threaded push fit can be found under the bonnet in various place one being in the one end of the pump and the other at the end of the Return Tap.