Tie Rod Adjuster - Nissan Navara D22 STR/DX Gen 2

Replacement tie rod adjuster suitable for the Nissan Navara D22 STR/DX Gen 2 from Superior Engineering. Many times stronger than the original factory component.

Suitable for lifts from 0" inch - 3" inch.

Lifetime warranty against bending. Australian made. Usage

These tie rod adjusters are designed to bolt up the factory steering linkages.

Includes:

- Replacement heavy duty tie rod ends
- 2 x skid plates to stop the tie rod nut from catching on the chassis rail.
Certification

Some vehicle modifications require LVVTA Certification. The following products may require LVVTA Certification when fitted:

- Adjustable Drag links and Drop Drag links
- Adjustable Panhard rods
- Adjustable Rear lower control arms
- Adjustable Rear upper control arms
- Adjustable Tie rods
- Adjustable Torque arms
- Diff drops
- Dropboxes
- Extended shackles
- Radius arms (in most instances)
- Upper control arms (UCA’s)

This information is a guide only, and we recommend you contact your local certifier in all cases where certification may be required.