FPP Speed Shop 458 views Claim this Business♡

Quickcar 57-700This QuickCar Firewall Battery Feed-Thru Stud is used where a 12V-16V power source has to pass through a panel such as a firewall. Designed to be mounted in a 1.275" hole and comes with all necessary mounting hardware for 5/16" power ring terminals. Sold each.

- 2-PIECE CONSTRUCTION- METRIC- PTFE LINER AVAILABLE- OPTIONAL LUBRICATION FITTING AVAILABLE- BALL- 52100 STEEL- HEAT TREATED- HARD CHROME PLATED- BODY- LOW CARBON STEEL- ZINC PLATED- CHROMATE TREATED

Jam Nuts ��� Inch

- WIDE SERIES- STAINLESS STEEL- PTFE LINER STANDARD- OPTIONAL STAKING GROOVE (ADD SUFFIX “V")- BALL- 400 SERIES STAINLESS STEEL- HEAT TREATED- RACE- 17-4 PH STAINLESS STEEL- HEAT TREATED- LINER- PTFE FABRIC

- 3-PIECE CONSTRUCTION- PTFE LINER AVAILABLE- OPTIONAL LUBRICATION FITTING AVAILABLE- MALE ROD END LOAD RATINGS BASED ON NO LUBRICATION FITTING- FOR LOAD RATING WITH LUBRCATOR, CONTACT FK ENGINEERING- BALL- 52100 STEEL- Rc 56 MIN- HARD CHROME PLATED- BODY AND RACE- ALLOY STEEL- HEAT TREATED- ZINC PLATED- CHROMATE TREATED

- 2-PIECE CONSTRUCTION- IMPERIAL- PTFE LINER AVAILABLE- OPTIONAL LUBRICATION FITTING AVAILABLE- BALL- 52100 STEEL- HEAT TREATED- HARD CHROME PLATED- BODY- LOW CARBON STEEL- ZINC PLATED- CHROMATE TREATED

- 2-PIECE CONSTRUCTION- IMPERIAL- PTFE LINER AVAILABLE- OPTIONAL LUBRICATION FITTING AVAILABLE- BALL- 52100 STEEL- HEAT TREATED- HARD CHROME PLATED- BODY- ALLOY STEEL- HEAT TREATED

- 2-PIECE CONSTRUCTION- BALL- 52100 STEEL- Rc 56 MIN- HARD CHROME PLATED- BODY- ALLOY STEEL- HEAT TREATED

- HEAVY DUTY PRECISION SERIES- LUBRICATION GROOVE AND HOLES IN ID & OD OF RACE- PTFE LINER AVAILABLE (SUFFIX “T")- EXAMPLE: AIN12T- PARTS WITH PTFE LINER HAVE NO LUBRICATION GROOVES OR HOLES IN RACE- BALL- 52100 STEEL- Rc 56 MIN- HARD CHROME PLATED- RACE- ALLOY STEEL- HEAT TREATED- OIL COATED

- 3-PIECE CONSTRUCTION- BALL- 52100 STEEL- Rc 56 MIN- HARD CHROME PLATED- BODY AND RACE- ALLOY STEEL- HEAT TREATED- ZINC PLATED- CHROMATE TREATED

- MATERIAL: 4130 ALLOY STEEL- CUPS SOLD WITH SNAP RING INCLUDED- REPLACEMENT SNAP RINGS AVAILABLE- FABRICATION OF PARTS USING THESE CUPS SHOULD BE PERFORMED BY A QUALIFIED WELDER- CP8 1.0000.750 1.250 COM8, FKS8, FKSSX8TCP10 1.1875.875 1.500 COM10, FKS10, FKSSX10TCP12 1.4375 1.000 1.750 COM12, FKS12...

- CENTER FINDERS ARE USED TO FIND THE LENGTH BETWEEN TWO CONNECTING RODS FOR EASE OF ASSEMBLY- CENTER FINDERS ARE SOLD IN PAIRS- TO PURCHASE A COMPLETE SET OF ALL 5 SIZES, USE PART NUMBER CTR1

- LOW CARBON STEEL- ZINC PLATED- CHROMATE TREATED PARTNUMBER BORExTHREAD BDIA DDIA TWTH ALGTH CLGTH SSLOT NTHD REF.0025-.0005.010-.010.005-.005.015-.015.062-.031.005-.005 UNF3A CV1 3/8 x 5/8.3750 1.125.825 3.375 2.000.375 5/8-18 CV2 1/2 x 5/8.5000 1.125.825 3.3752.000.375 5/8-18 CV3 3/8 x 3/4.3750 1...