Frankton Model Shop 136 views   2 clicks ♡

The LiPo Conversion Set allows for the fitment of popular LiPo battery packs (with a height of 24.5mm or less) to XRAY T2'008 and T2'009 EU Edition cars. The set contains CNC-machined, top-quality graphite plates as well as all necessary mounting hardware to give more top deck clearance for LiPo bat...

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires. New C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD a...

CNC-machined solid alu central layshaft. Standard on T1R.

Molded 4.9mm ball joints, open on both sides, for connection to 4.9mm pivot ball. Set of six.

Adjustable steering rod set for connecting the servo horn to the central servo saver. Includes two molded ball joints and a turnbuckle manufactured from world-renowned top-secret "Hudy Spring Steel".

Precision-machined bushing for front C-hub steering block pivot screws on XRAY T2, T3. Includes 4 pieces: 2 short 2 long.

Optional rear anti-roll bar (1.5mm thick) has 1 ground surface. This provides stiffness adjustment of the rear anti-roll bar. This is the MEDIUM rear anti-roll bar.

Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set.

CNC-machined battery straps made from highest-quality woven graphite. Each battery strap comes with captured threaded thumbscrew on one end, and molded coupler on other end for attachment to alu mount. Set of two.

Rear lower (inner) spring steel pivot pins for C-hub suspension. Hardened for very high durability and long life. Set of two

Composite rear bumper protects rear of chassis plate. Fastens to chassis rear with flathead screw and nut

CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.

Molded composite ball joint for 3.9mm ball. Set of 4.

Molded C-hub for left steering block. Caster pre-set at 6° for maximum on-power steering. Engraved with "L6" to easy identification. Medium rigidity. Use with right-side composite 6° C-hub (medium) #302286.

CNC-machined drive axles for XRAY T2, T3 made from world-renowned top-secret HUDY Spring Steelâ¢.

CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steelâ¢. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.

Alu wheel shim with 0.75mm offset. Set of 2. Fits T2, T3.

Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher machined side that contacts the duraluminum diff output. Specially hardened to assure maximum life.

Molded composite left-side steering block.

Alu ball-differential set for XRAY T2’008, T2'009, T3 made of special Swiss 7075 T6 alu components for high strength and durability. Features heat-treated and hardcoated aluminum output shafts, screw for external adjustment, tough composite 34T and also 38T diff pulley with Labyrinth Dust...

CNC-machined 50mm drive shaft for XRAY T2, T3 made from world-renowned top-secret HUDY Spring Steelâ¢. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength

Threaded 4.9mm ball end, for connection to molded ball joints. Set of six.

Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware.

Long output shaft for #305000 Alu Ball Differential made from new special Swiss 7075 T6 aluminum which is 30% stronger than previous material. Heat-treated and hardcoated.