Full Throttle 54 views ♡

TI Automotive Walbro Intank GSS342 High Pressure Fuel Pump Kitflows up to 255 litres per hoursupports up to 500hp on petrol naturally aspirated applicationsinlet is inline with the outlet - if you require offset inlet and outlet ports check out the GSS341 pump371 gramsIncludes pre-screen filter and...

TI Automotive (was Walbro) turbine E85 compatible turbine fuel pumpTurbine design E85 suitable high performance fuel pump from TI Automotive (was Walbro)- high pressure model - F90000274- dual channel turbine design, for high performance and high temperature applications- designed for engines with m...

TI Automotive Walbro Intank GSS341 High Pressure Fuel Pump Kitflows up to 255 litres per hoursupports up to 500hp on petrol naturally aspirated applicationsinlet is 180 degrees offset from outlet371 gramsDrop in replacement for upgrades to AU, BA, BF Ford Falcons. Can also be used in VT, VX, VY and...

TI Automotive (was Walbro) GSS351G3 intank fuel pump kitIncludes pre-screen filter and pigtail electrical connectorsupports up to 600hp at 40psi, naturally aspirated engine on petrolsimilar dimensions, but higher flow rate than 255lph familyinlet and outlet offset by 180 degrees39mm straight wall de...

Turbine design E85 suitable high performance fuel pump from TI Automotive (was Walbro)high pressure model - F90000295same basic fuel pump as F90000285 but with no check valve.If running two of these pumps we recommend either the FPTI285K or running external check valvesDual channel turbine design, f...

TI Automotive (was Walbro) GSS351G3 intank fuel pump kitsupports up to 600hp at 40psi, naturally aspirated engine on petrolsimilar dimensions, but higher flow rate than 255lph familyinline inlet and outlet ports39mm straight wall design for easy fittingpositive displacement for robust performancedes...

Genuine Walbro 255lph external high pressure fuel pump with mounting kit.M10 female thread inlet and outlet ports3.4mm male terminal posts43mm OD157mm overall length461 grams (pump only)If you would the pump by itself,Mouting Kit includes:2 x p-clamps2 x electrical ring terminals1 x fitting sleave (...

Turbine design E85 suitable high performance fuel pump from TI Automotive (was Walbro). This pump is also refered to as the Hellcat pump.- high pressure model - F90000285- check valve installed so suitable for duel pump applications- dual channel turbine design, for high performance and high tempera...

In-tank low pressure lift pumpAs used by leading teams in the following series:-- V8 Supercars- NZV8s- GT1Can run dry for short periods of time without affecting pumping efficiency.Only draws 3.5A while running - a lot less than other so called lift pumps.Must be used with a header tank or swirl pot...

Extension cap for 58mm 3/4 length fuel injector.- extends injector to traditional 70mm length- provides 14mm head to fit into fuel rail- includes fitted filter basket- recommended as most modern injectors have a non-serviceable internal filter- 11mm option also available.

Mitsubishi EVO 4 through 9 intank fuel pump fitting kit for GSS342 and GSS352 pumps- fits either TI Automotive / Walbro GSS342 or GSS352 fuel pumps- for Mitsubishi EVO 4 through EVO 9 only- saves mucking around adapting your fuel pump bracketGenuine TI Automotive / Walbro kit includes:-- plastic fue...

TI Automotive / Walbro fitting kit for later model Nissan cars.For use with either the GSS342 or the newer higher flowing GSS352 fuel pumps.Suitable for the following applications:-- S14 200Sx- S15 200SX- R33 Skyline (not GTR)- R34 Skyline (not GTR)Fuel pump needs to be purchased separately.

Walbro 255 In Tank Fuel Pump W/ Setup Kit 1994-2001 Acura Integra GSR LS 1992-2000 Civic 1.5LBrand: WalbroPart Number: GCA3366-2:Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions...

Extension cap for 58mm 3/4 length fuel injector- Extends injector to traditional 70mm length- 11mm injector head to fit Japanese fuel rails- 14mm option also available.

TI Automotive Walbro Intank GSS342 High Pressure Fuel Pump Kit - flows up to 255 litres per hour- supports up to 500hp on petrol naturally aspirated applications- inlet is inline with the outlet - if you require offset inlet and outlet ports check out the GSS341 pump- 371 gramsIncludes pre-screen fi...

TI Automotive Walbro Intank GSS341 High Pressure Fuel Pump Kit - flows up to 255 litres per hour- supports up to 500hp on petrol naturally aspirated applications- inlet is 180 degrees offset from outlet- 371 gramsDrop in replacement for upgrades to AU, BA, BF Ford Falcons. Can also be used in VT, VX...

TI Automotive (was Walbro) GSS351G3 intank fuel pump kitIncludes pre-screen filter and pigtail electrical connector - supports up to 600hp at 40psi, naturally aspirated engine on petrol- similar dimensions, but higher flow rate than 255lph family- inlet and outlet offset by 180 degrees- 39mm straigh...

TI Automotive / Walbro GSS342 or GSS352 fuel pump fitting kit for MY02-07 Subaru WRX / STIGenuine fitting kit includes the following items - pre-screen filter- adapter wiring loom- fuel submersible hose- 2 x hose clamps- rubber mountThis adapter kit will only fit the TI Automotive / Walbro GSS342 an...

Turbine design E85 suitable high performance fuel pump from TI Automotive (was Walbro) - high pressure model - F90000295- same basic fuel pump as F90000285 but with no check valve. If running two of these pumps we recommend either the FPTI285K or running external check valves- dual channel turbine d...

TI Automotive (was Walbro) GSS351G3 intank fuel pump kit - supports up to 600hp at 40psi, naturally aspirated engine on petrol- similar dimensions, but higher flow rate than 255lph family- inline inlet and outlet ports- 39mm straight wall design for easy fitting- positive displacement for robust per...

Genuine TI Automotive (formely Walbro) 350lph external high pressure fuel pump with fitting kit.The newest inline pump by TI Automotive.A higher flowing version of the popular 255l/hr inline external fuel pump for engines requiring more fuel flow for higher horsepower applications - manufacturer rat...

Genuine Ti Automotive (formely Walbro) 255lph external high pressure fuel pump with mounting kit.Designed as an external inline high pressure pump - intank version are available here. - M10 female thead inlet and outlet ports- 3.4mm male terminal posts- 43mm OD- 157mm overall length- 461 grams (pump...

Disconnected 100% (full speed)Two speed control can easily be setup by putting the speed control wire to ground to flow 70% less fuel (from full speed). Connect the speed control wire to a PWM output to have full variable speed control (from 45% to 100% duty cycle).Petrol flow rate at 100% duty cycl...

TI Automotive (was Walbro) E85 compatible fuel pumpIncludes pre-screen filter and mating electrical pig-tail connector - model number F10000302- compact 37mm diameter- designed for engines with up to 450hp (fuel and aspiration dependant)- flow rate is 230lph at 40psi fuel pressure with 13.5V (see ta...