Full Throttle 1 views Claim this Business♡

Xspurt 725cc per minute fuel injectorDynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), before shipping so that your set of injectors is matched within 1% across the entire set. - These are a 58mm long body injector. The supplied adaptor cap makes them "normal" 70mm length ...

Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set. - These are a 58mm long body injector (3/4 length)- Full injector deadtime/battery compensation information is supplied with each set of injectors- M...

Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), before shipping so that your set of injectors is matched within 1% across the entire set. - Length: 38mm body length (stubby length).- Full injector deadtime/battery compensation information is supplied with each set of inj...

Xspurt 525cc 3/4 Length High Resistance Fuel InjectorDynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set. - These are a 58mm long body injector- Full injector deadtime/battery compensation information i...

Please read the warnings at the bottom of the specification list. - 2200cc/min at 3 bar (43.5psi), up to 3,300cc/min at 9 bar- high impedance (high resistance) so no need to add ballast resistors on some ECUs- excellent injector dynamics make this injector incredibly easy to tune- modern design with...

Xspurt 1170cc/min fuel injectorFor when 1000cc is just not enough.Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so your set of injectors is matched within 1% across the entire set. - These are a 38mm long body injector (stubby length). Can be supplied with an adaptor c...

Xspurt 1000cc Stubby Fuel InjectorDynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set.A modern injector solution for people who want serious horsepower - Length: 38mm body length (stubby length)- 1000cc...

Xspurt 1000cc long nose unmodified fuel injectorDynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set. - 1000cc/min at 3 bar (43.5psi)- Suitable for use with ethanol, methanol as well as most oil based fu...

Xspurt 1000cc long nose unmodified fuel injectorDynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so that your set of injectors is matched within 1% across the entire set. - 1000cc/min at 3 bar (43.5psi)- Suitable for use with ethanol, methanol as well as most oil based fu...

Dynamically flow tested in New Zealand by us, Motorsport Electronics (MSEL), so your set of injectors is matched within 1% across the entire set. - The length of these injectors is 58mm, or "3/4 length". The optional adaptor cap makes them "normal" 70mm in length and adapts them to 11mm or 14mm top...

Mitsubishi EVO 1 through 9 fuel injector kit - 731ccDirect fit replacement injector set for all Mitsubishi EVO models except the EVOX - high resistance injectors so ballast resistors must be removed- includes new lower injector seal- same electrical connectors as OEM so no adapters or loom cutting r...

Mitsubishi EVO 1 through 9 fuel injector kit - 1000ccDirect fit replacement injector set for all Mitsubishi EVO models except the EVOX - high resistance injectors so ballast resistors must be removed- includes new lower injector seal- same electrical connectors as OEM so no adapters or loom cutting ...

HP Tuners - FordHP Tuners - GMLife RacingLinkMotecSCT for FordSyvecsGeneric Deadtimes

MotecSCT for FordSyvecsGeneric Deadtimes

MotecSCT for FordSyvecsGeneric Deadtimes

Ford Falcon FG 731cc direct fit fuel injector setDrop in replacement injector set. No additional parts are required. - Bosch non-modified fuel injector - excellent spray pattern- high resistance injector so no ballast resistors requiredPlease note that this injector kit is not designed for the earli...

Ford Falcon FG 1000cc direct fit fuel injector setDrop in replacement injector set. No additional parts are required. - Bosch non-modified fuel injector - excellent spray pattern- high resistance injector so no ballast resistors requiredPlease note that this injector kit is not designed for the earl...

Ford Falcon BA / BF 731cc direct fit fuel injector setDrop in replacement injector set. No additional parts are required. - Bosch non-modified fuel injector - excellent spray pattern- high resistance injector so no ballast resistors required- double filters to help protect your new injectorsPlease n...

8X 1000CC BOSCH Fuel InjectorsSuit Petrol and E851000cc/min at 3 bar (43.5psi)high impedance (high resistance) so no need to add ballast resistors on some ECUsexcellent injector dynamics make this injector incredibly easy to tunemodern design with linear flow ratesincludes adapter cap of your choice...

For when 1000cc is not enough.Dynamically flow tested in New Zealands, so your set of injectors is matched within 1% across the entire set.Please read the warnings at the bottom of the specification list.2200cc/min at 3 bar (43.5psi), up to 3,300cc/min at 9 barhigh impedance (high resistance) so no ...

Xspurt 1170cc/min fuel injectorFor when 1000cc is not enough.Dynamically flow tested in New Zealand, so your set of injectors is matched within 1% across the entire set.These are a 38mm long body injector (stubby length).Can be supplied with an adaptor cap to take them to "normal" 70mm length or 3/4...

Bosch 1000cc long nose unmodified fuel injectorDynamically flow tested in New Zealand, so your set of injectors is matched within 1% across the entire set.1000cc/min at 3 bar (43.5psi)Suitable for use with ethanol, methanol as well as most oil based fuelsModern design offering extremely good idle co...

Dynamically flow tested in New Zealand, so your set of injectors is matched within 1% across the entire set.These are a 38mm long body injector (stubby length).Full injector deadtime/battery compensation information is supplied with each set of injectorsModern design offering extremely good idle con...

These are a 58mm long body injector. The supplied adaptor cap make them "normal" 70mm length and adapts them to 11mm or 14mm top orings.Full injector deadtime/battery compensation information is supplied with each set of injectorsModern design offering extremely good idle control.Suitable for use wi...