futuresfins 1 views Claim this Business♡

Place the 1-Shot spacer in the box during the lamination and setting process to prevent the fin box from squeezing as the resin sets.

The works with the ILT Jig Plate and ensures proper routing and placement for Futures ILT boxes by showing hashmarks to line up with shaper dots and the outline of the box.

Place the 1-Shot spacer in the box during the lamination and setting process to prevent the fin box from squeezing as the resin sets.

The 3M 1/2" tape is the standard used by serious board builders. The tape covers the top of the Futures leash plug to ensure resin does not enter during the lamination stage.

Place the 1-Shot dowel in router and appropriate location on the alignment target to set jig rails quickly and easily.- Available in 1/2" and 12mm

The Futures "Timmy Tool", named after legendary San Clemente Shaper/Surfer Timmy Patterson, is used for two purposes. It is used to ensure an even jig plate when routing fin boxes, and also to set the router bit height when not using the one pass cutter. To check that the plate is evenly placed 8mm ...

The 3M 3/8" tape is the standard used by serious board builders. The tape covers the top of the Futures ILT Box ensuring resin does not enter during the lamination stage.

The Futures quad rear shims are designed to let you use 1/2" rear fins in 3/4" boxes. Simply place the shim in the 3/4" rear boxes to fill the extra space.

For Futures Fin Boxes & Keys

The Futures 1/2" One Pass Router Bit is made for routing the 1/2" boxes. Using this bit will ensure the proper depth during installation.- Hardened Tool Steel coated with AlTin for wear resistance- Designed and custom made in the USA

The Futures 3/4" One Pass Router Bit is made for routing the 3/4" boxes. Using this bit allows you to easily route a T-shaped profile for the deep part of the box and the flange in one pass.- Hardened Tool Steel coated with AlTin for wear resistance- Designed and custom made in the USA