Nikon Nikkor Z FX 400mm F2.8 TC VR S-Line Lens

Dust-and-drip resistance. The NIKKOR Z 400mm f/2.8 TC VR S has a magnesium alloy structure with sealing across movable parts on the lens barrel and a rubber gasket around the lens mount for superior dust and drip resistance5. A flourine-coated front element also repels dust, water and oil which makes it much easier to clean. Highly customisable. Enjoy easy-to-access buttons and lens rings, including a customisable control and Fn ring. Return to your favourite focus positions using the memory recall function6. Stunning image quality. Delivering the highest performance under any lighting conditions, the revolutionary Meso Amorphous Coat and ARNEO Coat work together to minimise flares and ghosting effects so you can focus on capturing the sharpest images possible.

1 In NORMAL mode. This value is achieved when attached to a mirrorless camera equipped with 35mm film size image sensor. 2 At 400mm focal length. 3 WARNING: Do not use this product if you have a pacemaker or other medical device. The magnet or magnets in this product could cause medical devices to malfunction. 4 Realises near-silent operation that is clearly different from conventional quiet operation. 5 The lens is not guaranteed to be dust- and drip-resistant in all situations or under all conditions. 6 Firmware for the cameras must be updated to the latest available versions before use.

“WARNING: Do not use this product if you have a pacemaker or other medical device. The magnet or magnets in this product could cause medical devices to malfunction."

Specifications

Mount Type: Nikon Z Mount
Focal Length: 400mm without built-in teleconverter, 560mm with built-in teleconverter
Maximum Aperture: Without built-in teleconverter: f/2.8, With built-in teleconverter: f/4
Minimum Aperture: Without built-in teleconverter: f/22, With built-in teleconverter: f/32
Format: FX
Maximum Angle Of View (Dx-Format): 4° without built-in teleconverter, 2°50? with built-in teleconverter
Maximum Angle Of View (Fx-Format): 6°10? without built-in teleconverter, 4°30 ?with built-in teleconverter
Maximum Reproduction Ratio: Without built-in teleconverter x0.17, With built-in teleconverter x0.23x
Lens Elements: 25
Lens Groups: 19
Vr (Vibration Reduction) Image Stabilization: Lens shift using voice coil motors (VCMs)
Diaphragm Blades: 9
Arneo Coat: Yes
Ed Glass Elements: 2
Fluorite Elements: 2
Sr (Short-Wavelength Refractive) Glass Elements: 1
Super Ed Glass Elements: 1
Fluorine Coat: Yes
Meso Amorphous Coat: Yes
Autofocus: Yes
Af Actuator: Silky Swift VCM
Internal Focusing: Yes
Minimum Focus Distance: Without built-in teleconverter: 2.5m from the image sensor, With built-in teleconverter: 2.5m from the image sensor
Focus Mode: Autofocus, Auto/Manual
Focus Limit Switch: Two positions: FULL (? – 2.5 m) and ? – 6 m
Filter Size: 46mm
Approx. Dimensions (Diameter X Length): 156 x 380 mm Distance to end of lens from camera lens mount flange, Based on CIPA guidelines
Approx. Weight: 2950 g Based on CIPA guidelines
Lens Type: Prime