Nikon Nikkor Z FX 400mm F4.5 VR S-line Lens
Rubber gaskets keep dust, dirt and moisture out of moving parts, including the lens mount. The front element has Nikon’s nonstick Fluorine Coat, which repels oil, moisture and smudges and easily wipes clean.
Perfect dustproof and waterproof performance is not guaranteed under all conditions. Nano Crystal Coat blocks flare.
Shoot into harsh backlighting with virtually no internal reflections, glare or cross-lighting. Capture sharp, high contrast images at the most challenging times of day. Recall stored focus positions.
Save a focus position with the Memory Set button. As your subject approaches the decisive moment, instantly snap back to that saved position using the Fn or Fn2 buttons. Specifications:
Mount Type: Nikon Z Mount
Focal Length: 400mm
Maximum Aperture: f/ 4.5
Minimum Aperture: f/ 32
Format: FX
Maximum Angle of View (DX-format): 4°
Maximum Angle of View (FX-format): 6° 10′
Maximum Reproduction Ratio: 0.16x
Lens Elements: 19
Lens Groups: 13
VR (Vibration Reduction) Image Stabilization: Lens shift using voice coil motors (VCMs)
Diaphragm Blades: 9
Nano Crystal Coat: Yes
ED Glass Elements: 1
SR (Short-Wavelength Refractive) Glass Elements: 1
Super ED Glass Elements: 2
Fluorine Coat: Yes
Autofocus: Yes
AF Actuator: STM (stepping motor)
Internal Focusing: Yes
Minimum Focus Distance: 2.5m from focal plane
Focus Mode: Auto/Manual
Focus Limit Switch: Two positions: FULL (∞ – 2.5 m) and ∞ – 6 m
Filter Size: 95mm
Approx. Dimensions (Diameter x Length): 104 mm x 234.5 mm Distance to end of lens from camera lens mount flange
Based on CIPA guidelines
Approx. Weight: 1160 g Based on CIPA guidelines
without tripod collar, 1245g with tripod collar
Lens Type: Prime
1 Among f/4.5 and slower lenses, (at 1,160 grams, excluding tripod collar), including those with a focal length of 400mm, for interchangeable-lens cameras equipped with a full-frame (35mm equivalent) image sensor available as of June 29, 2022.