Get Lost Cycling 150 views Claim this Business♡

65-622 29 X 2.40 Downhill Casing black/black skin foldable 6/660 1290 51

The Firewall is engineered from the ground up as an MTB-specific goggle, with an open-ventilation design that dramatically reduces fogging and a minimalist TPU frame that opens up your field of view. Triple-layer foam provides a precise fit that is ultra-comfortable on the face, with a frame shape t...

The sleek new MRP Race Axles give you increased rear end clearance - especially useful for those who ride tight, technical trails. In some cases, our Race Axles save upwards of an inch (~25mm). Additionally, they weigh in anywhere from 20-50% LESS than the common QR-style thru-axles (Shimano E-Thru,...

Replaceable derailleur hanger model 257.Fits:Salsa Ala Carte Ti 2011Salsa El Mariachi Ti 2010-2012Salsa Fargo 2011-2013Salsa Fargo Ti 2011-2013Salsa Spearfish 2011-2013 with QR Rear TrianglesSalsa Vaya 2011Salsa Vaya Ti 2011-2012Salsa La Cruz Ti 2011Salsa Beargrease 2013Salsa Warbird 2013-2015Salsa ...

Replacement derailleur hangers for Salsa frames.- Fits 2020 Cutthroat (Cutthroat V2 frames)- Fits all Salsa Split Pivot Bikes, 2019 Warbird, 2019 Warroad, 2020 Stormchaser.- Fits 2019 Beargrease Carbon Frames- Fits All-City Cosmic Stallion Ti, Space Horse 2020 , and Gorilla Monsoon 2020

Replacement derailleur hangers for Salsa frames.- Fits Salsa Cutthroat V1 (2016–2019)- Fits Salsa Colossal Ti 2015 , Salsa Warbird Carbon/Alloy (2016–2018), Salsa Blackborrow, and Foundry Overland 2016- All-City Cosmic Stallion 2018 , All-City Electric Queen, All-City Gorilla Monsoon V1 (pre-2020), and All-City Nature Cross 2019- Compatible with 12 x 1.5mm threaded axles

Salsa Derailleur HangerReplacement RIGHT swing plate for Alternator Dropout with derailleur hanger:Right thru-axle M12x1.75 thread pitch

Salsa Alternator dropout options for compatible Salsa framesContact Cyclewerks for specific availability details.

Reduction plates for Boost Alternator Dropouts.- For converting 148mm rear spaced "Boost" frames to 142mm TA rear spacing- Includes longer hardwareSuit Salsa Timberjack, Timberjack Ti, Fargo, Fargo Ti.Please note:Standard boost 148mm alternator dropouts use a 180mm thru-axle (12mm x 180mm x 1.75tpi).142mm spaced dropouts require a 174mm thru-axle (12mm x 174mm x 1.75tpi), part number FS8110.

ROCKSHOX MAXLE ULTIMATE REAR AXLESBasic things like axles are often the easiest to overlook. Put one hand on the Maxle Ultimate, though, and you’ll be glad we paid serious attention to the finer details. Because one hand is all it takes to remove or install the Maxle Ultimate. And lever-placement ...

Colour BlackFEATURES- 34g lighter than Maxle Lite- Easy installation with a 6mm Allen wrench- Compatible with most frames

The Scrub and Buff pack includes everything you need to get your bike cleaned, lubed, polished and ready for the trail or the road. Pack contains: - 1 x Dirt Juice Super – Degreaser- 1 x Dirt Juice – Cleaner- 1 x Frame Juice Polish & Protector Spray- 1 x Viking Juice Chain Lube- 1 x Dirty Little Scrubber Chain Cleaner

Bearing service tool-set- designed to service all bearing applications.: The Enduro bearings Multi Press is designed to service a variety of bearing applications and components all in one tool-set. The Multi Press will install headset cups, bottom bracket bearings, hub bearings, and linkage bearings...

This is the tool for removal and installation of needle bearings in rear shocks on full suspension bicycles. These bearing guides are designed to be used with the BRT-045, front hub and needle bearing press.

BT-100 - Blind Hole Bearing Puller Set (Black-Oxide) This tool set allows you to pull bearings that are pressed into a housing, as found in all hubs and pivots. Includes a full selection of expandable pullers to work on bearings with an inside diameter between 8-32mm. Featuring Black Oxide coated pullers and plated slide hammer. Bearings not included.

The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets. The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore. The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm size punches along with one of ...

BBT-036 - Flat Wrench for Maxhit BSA-24 (FC-25), 29 & 30 This spline tool allows you to install and remove Maxhit BB cups for BSA24, 29 and 30 as well as outboard Shimano XT and Ultegra BB cups (FC-25) along with standard BSA29/DUB and BSA30 cups.

BBT-010 - TorqTite Wrench This Tool allows you to tighten and loosen TorqTite BB cups for BB86/92 and PF30 BB shells as well as outboard BB cups. It also works for centerlock disc brake lock-rings. This item is a single wrench, we recommend two for TorqTite BB installation or a single wrench can be used in conjunction with BBT-001, BBT-015 or BBT-025 on the opposite side.

BBT-050 - Chainless Cassette Whip Lightweight alternative to traditional chain whips, for use in conjunction with lockring tool to secure the cassette while removing the lockring. Weighing in at just 89g and taking up minimal space, this is a great tool for any race mechanics tool box

BBT-222 - Stainless Pro Blind Hole Puller/Mallet Set A major upgrade to our standard blind hole puller, this full stainless steel set is designed and manufactured with profession mechanic in mind. This tool set includes high-quality, heat-treated stainless collets designed to remove bearings with an...

Tool for removing the bearings from the crank spindle on Campagnolo cranks.

This tool is for making adjustments on a bicycle when pedals are not in place or present. The Pro Pedal Tool threads into crank arm and rotates smoothly on two steel cartridge bearings. Please note this is for drive-side ISO left-hand thread crank arms only.

PARK TOOL - MWR-SET RATCHETING METRIC WRENCHWorld famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MWR-SET includes 6mm to 17mm wrenches with a 12-point two-way ratcheting box end. Forged from chrome vanadium steel, chrome plated, meticulously polished, then cen...

ADDED FEATURESRivet anvil for Campagnolo® hollow pinSecondary chain link fence, Chain pin breakerALLEN WRENCH4 mmBODYStainlessCHAIN HOOKHardened steelCHAIN TOOLCrMo steelFUNCTIONS6SIZE7.5 x 2.3 x 1.6 cm / 3" x 0.9" x 0.6"SPEEDMulti-speed chain up to 12 speedWEIGHT93 g / 3.27 oz