Herbos Equipment 125 views Claim this Business♡

Collapsible trays nest for easy storage of small parts, tools, screws, boltsThe bottom of each tray has a magnetic surface for total magnet coverage and strong holding powerDurable silicone trays are easy to rinse and cleanLarge tray: 280mm x 180mm x 60mmMedium tray: 155mm x 130mm x 45mmSmall tray: 130mm x 80mm x 45mmAll trays collapsed height 20mm

Hacksaw, 8 Blades, 16oz Ball Pein Hammer, 305mm/12" Steel Ruler, Utility Knife with bladesStandard tray dimensions: 570mm (W) x 250mm (D)Standard trays are suggested for use in full width drawers of a Tool Chest or Roller Cabinet.

Ring and Open End Spanners 6mm, 7mm, 8mm, 9mm, 10mm,11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 3/4"Ignition Wrenches 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm5/32", 3/16", 7/32", 15/64", 1/4", 9/32", 5/16", 11/32", 3/8", ...

Top trays are suggested for use in the top portion of a Tool Chest.Sockets1/4" Dr (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 1/4", 5/16" (Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm,3/8" Dr (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 3/8", 7/16", 1/2" (Deep ...

Top trays are suggested for use in the top portion of a Tool Chest. 1/4" Dr (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 1/4", 5/16" (Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 10mm3/8" Dr (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 3/8”, 7/16", 1/2", 9/16", 5/8", 3/4", (Dee...

Parallel Punch 3/16"Taper Punch 1/8", 3/16"Centre Punch 7/16"Cold Chisel 3/8", 1/2", 5/8"Small tray dimensions: 167mm (W) x 250mm (D)Small trays are suggested for use in small drawers of a Tool Chest.

Phillips #00, #0, #1Slotted 2.0, 2.4, 3.0Torx T-8, T-10Small tray dimensions: 167mm (W) x 250mm (D)Small trays are suggested for use in small drawers of a Tool Chest.

8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mmSmall tray dimensions: 167mm (W) x 250mm (D)Small trays are suggested for use in small drawers of a Tool Chest.

1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"Small tray dimensions: 167mm (W) x 250mm (D)Small trays are suggested for use in small drawers of a Tool Chest.

Gearless Ratchet DriverHex Nut Driver 6mm, 8mm, 9mm, 10mm, 11mm,3/16", 1/4", 5/16", 3/8", 7/16"Bits (25mm) Phillips #0, #1, #2, #3,Slotted 1/8", 3/16", 1/4", 9/32"Hex 1/16", 3/32", 1/8", 5/32", 3/16", 1/4",Torx T-10, T-15, T-20, T-25, T-30, T-40Bits (50mm) Phillips #1, #2,Slotted 3/16", 1/4"Torx T-1...

1/4" Dr x 75mm/3", 150mm/6", 225mm/9" Extensions3/8" Dr x 75mm/3", 150mm/6", 250mm/10" Extensions1/2" Dr x 75mm/3", 125mm/5", 250mm/10" Extensions3/8" Dr x 250mm/10", 1/2" Dr x 430mm/17" Power Bars3/8" Dr x 200mm/8", 1/2" Dr x 250mm/10" Sliding T Bars3/8" Dr (F) x 1/4" (M), 1/2' Dr (F) x 3/8" (M), 3...

200mm/8"Linesman Plier, 200mm/8" Long Nose Plier,175mm/7" Diagonal Plier, 250mm/10" Groove Joint Plier,250mm/10" Curved Jaw Locking Plier, 150mm/6" Long Nose Locking Plier150mm/6", 200mm/8", 250mm/10" Adjustable Wrenches1/2" Dr Impact Driver, Impact Bits Phillips #2, #3, Slotted 5/16", 3/8"15mm/5/8"...

200mm/8" Linesman Plier, 200mm/8" Long Nose Plier, 175mm/7" Diagonal Plier250mm/10" Groove Joint Plier, 250mm/10" Locking Plier200mm/8", 250mm/10” Adjustable Wrenches1/2" Dr Impact Driver, Impact Bits Phillips #2, #3, Slotted 5/16", 3/8"Ball End Hex Key Wrenches 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5m...

Hacksaw, 15 Blades, 16oz Ball Pein Hammer, 175mm/7" Straight Nose Internal, Bent Nose Internal, Straight Nose External, Bent Nose External Circlip PliersStandard tray dimensions: 570mm (W) x 250mm (D)Standard trays are suggested for use in full width drawers of a Tool Chest or Roller Cabinet.

Ring and Open End Spanners 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"Screwdrivers Phillips #1 x 3", #2 x 4", Slotted 1/8" x 3", 1/4" x 1 1/2", 1/4" x 4", 5/16" x 6"Pozi #2 x 4"Standard tray dimensions: 570mm (W) x 250mm (D)Standard trays are suggested for use in full width drawers of a Tool Chest or Roller Cabinet.

Phillips #0 x 75mm/3", #1 x 75mm/3", #2 x 38mm/1 1/2",#2 x 100mm/4", #2 x 200mm/8", #3 x 150mm/6"Slotted 1/8" x 75mm/3", 3/16" x 100mm/4", 1/4" x 38mm/1 1/2",1/4" x 100mm/4", 1/4" x 150mm/6", 5/16" x 150mm/6", 3/8" x 255mm/10"Robertson #2 x 100mm/4"Pozi #1 x 100mm/4", #2 x 100mm/4" Standard tray dim...

XD trays are suggested for use in full width 41" wide storage units.1/4" Dr (6pt) 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 1/4", 5/16" (Deep 6pt) 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm3/8" Dr (12pt) 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 3/8", 7/16", 1/2" (Deep 6pt) 10...

Powerbuilt 17Pc Screwdriver EMPTY Foam Tray ONLYStandard tray dimensions: 570mm (W) x 250mm (D)Standard trays are suggested for use in full width drawers of a Tool Chest or Roller Cabinet.NO TOOLS INCLUDED