Hydrometrics 25 views Claim this Business♡

Tech Specs:Nominal Voltage: 12VCut-Off Voltage: 10.5VPeak Discharge Current: 11A(5sec)Spade Size: F1Charging Advice:Charging Mode: CVCycle Charge Voltage: 14.4V-15VFloat Charge Voltage: 13.5-13.8VRecommended Charging Current: 0.66AProduct Dimensions:Length is 178.0 mm, Height is 66.0 mm, Depth is 34...

UV-Shielded GW50 Sampling ChamberMake field sampling with the portable HydroMetrics GW50™ faster, cleaner, and easier.The GW50 UV-Shielded Sampling Chamber fits over the sensor’s measurement area to create a contained sampling space while helping reduce exposure to the instrument’s UV light. A...

The entry GW50 optical sensor with turbidity compensation included, robustly designed for long term deployment. Uniquely designed ‘sub-50mm’ for installation in bores with an internal diameter of 50mm or greater (2 inch). Can also be used in surface water. For maximum accuracy, water must be low...

The HydroMetrics GW50PC™ nitrate sensor is designed for installation within a water body or well where regular cleaning is not desirable and the well internal diameter is >55mm (2 3/16").- The measurement cell in this sensor is submerged for scheduled measurements. The Water-Jet™ cleaning system...

The entry GW50 optical sensor with turbidity compensation included, robustly designed for long term deployment. Uniquely designed ‘sub-50mm’ for installation in bores with an internal diameter of 50mm or greater (2 inch). Can also be used in surface water. For maximum accuracy, water must be low...

The HydroMetrics GW50FC™ nitrate sensor is designed for situations where a suitable bore is not available to install a nitrate sensor. Water can be pumped from the water source and piped directly through the measurement cell in this sensor.Common uses: - Drinking water and stock water monitoring.-...

The HydroMetrics GW50PC™ nitrate sensor is designed for installation within a water body or well where regular cleaning is not desirable and the well internal diameter is >55mm (2 3/16").- The measurement cell in this sensor is submerged for scheduled measurements. The Water-Jet™ cleaning system...

The Portable HydroMetrics GW50™ Optical Nitrate Sensor is a robust cost-effective sensor for self-contained field use that uses UV-C optical technology to accurately measure the concentration of total nitrates in water samples. Our "Lab in a Case" allows anyone to accurately measure total nitrates...

This portable accessory kit for the HydroMetrics GW50™ comes with: - 1 x High quality stainless steel box- 1 x Measurement cell UV-C safety cover- 1 x Cleaning brush- 1 x Syringe- 10 x 30mm 0.45μm syringe water sample filters- 2 x containers for cleaning products (not shipped full internationally...

This high quality shielded cable is designed to fit the HydroMetrics GW50™ range of sensors.