Ideal Electrical Suppliers 1 views Claim this Business♡
×-
-
-
-
-
-
$428.95P04 Energy Meter 1Ph Direct 45A Pulse Single DINThis Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is I...Buy from Store 0 0 -
$591.10P14 Energy Meter 1Ph 100A RS485 Pulse 2 DINThis Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is I...Buy from Store 0 0 -
$1,060.30P34 Energy Meter 3Ph 100A RS485 Pulse 4 DINThis Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is I...Buy from Store 0 0 -
$1,336.30P44 Energy Meter 3Ph 5A CT RS485This Schneider Charge Pro product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. It can also be floor-standing fixed on a pedestal and can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK degree of protection is I...Buy from Store 0 0 -
$1,270.75P44-QCT Energy Meter 2 x 3Ph RS485This Schneider Charge Pro mounting accessory is a pedestal mounting pole, installed on the floor. It allows to support 1 Schneider Charge Pro charging station. The color is dark grey (RAL 7016). The pedestal material is Alu 5754 with zinc phosphate pre-treatment. The dimensions are (H) 1213mm x (W) 262mm x (D) 229mm. Its product weight is 9kg.Buy from Store 0 0 -
-
$364.55P44-QCT 3Ph Block 63-250A CT 21 X 21mm Holes 35mm Ctr 1m cblThis EcoStruxure EV charging Expert is an EV charger controller providing a dynamic load management for Schneider Charge Pro charging stations. It is recommended for condominiums to optimize the impact of consumption of EV charging infrastructure on an electrical installation. The capacity is to con...Buy from Store 0 0 -
$407.10P44-QCT 3Ph Block 160-630A CT 31 X 31mm Holes 45mm CentreThis Schneider Charge Pro accessory is a conversion kit for EVlink pedestal. This plate allows to convert the pedestal for 1 charger to a pedestal for 2 chargers. The dimensions are (W) 360mm x (H) 600mm x (D) 50mm. Its product weight is 1.6kg. The color is dark grey (RAL 7016). The conversion kit material is Alu 5754 with zinc phosphate pre-treatment.Buy from Store 0 0 -
-
-
-
$39.10P44-QCT RJ12 x 1 CT Cable 2 metresThis Schneider Charge accessory is a cable holder. It allows to hold the connector of the electric vehicle charging cable. The holder is beside the charging station and is fixed on the wall with 2 screws. It is made of plastic.Buy from Store 0 0 -
$1,619.20P44-QCT Energy Meter 4 x 3Ph RS485This Schneider Charge Pro mounting accessory is a pedestal mounting pole, installed on the floor. It allows to support 2 Schneider Charge Pro charging stations. The color is dark grey (RAL 7016). The pedestal material is Alu 5754 with zinc phosphate pre-treatment. The dimensions are (H) 1213mm x (W) 262mm x (D) 229mm. Its product weight is 10kg.Buy from Store 0 0 -
-
$532.36Timer 72 x 72 24hr with Power ReserveTimer 72 x 72 24 hours with Power ReserveBuy from Store 0 0 -
$280.69Time Switch Mechanical 24hr 15min No ReserveTime Switch Mechanical 24 hours 15 minutes, No ReserveBuy from Store 0 0 -
$483.95Time Switch Mechanical Weekly with ReserveTime Switch Mechanical Weekly, with ReserveBuy from Store 0 0 -
$387.17Time Switch Mechanical 24hr 15min with ReserveTime Switch Mechanical 24 hours 15 minutes, with ReserveBuy from Store 0 0 -
×