Jimny NZ 86 views   2 clicks Claim this Business♡

WEIGHT 0.4 kgWhat's Included - 1 x Toyota 70 Series (2023 ) High beam Adaptor

2019 JB74 Jimny Moulded Rubber Floormats, for the explorer that likes to get mud on their boots, these rubber floor mats will help keep that mud off your carpet.UPDATE 22/03/2022: Our new design sits much nicer in the back, without interfering with the front seats sliding back. Reviews mention issues with the rear mat, this has been fixed.

These are very well-made snorkels, made from high-quality, strong plastic. I've found that once these are mounted, they are very firmly attached - the mounts are great.Complete your Jimny with a great quality, well-made snorkel.Comes with a template sheet to help with fitting and all the parts requi...

SHIPPING WEIGHT 5.7kg

The ST4K 50-inch LED Light Bar combines the strengths of both spot and flood reflector distributions to provide an amazing 1,025m delivery, with 55m on each side of the vehicle with the flood beam.By harnessing the power of PURE Drive™ technology, our range of STEDI ST4Ks are made to take full adv...

We may be a little biased, but we think this is the sleekest Rhino Rack™ LED Light Bar mounting solution on the market. Designed by STEDI specifically to suit the Rhino Rack™ Pioneer Platform. This is a 100% bolt-on solution that supports a very wide application of light bars.New 2020 Version 2 ...

COMPACT DESIGN. MEGA PERFORMANCE.The compact-LED driving light space has been fearfully neglected, with offerings looking as underwhelming as their inability to sustain a compact performance. Enter the all-new STEDI QUAD Pro.A LEGENDARY BLOODLINE.The QUAD Pro is the continuation of the high-calibre ...

The Stedi 2 to 1 Deutsch Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT2 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our 2 Output wiring harnessCable Length is 900mmExtended Length is 1500mm

ADR COMPLIANCE ADR 46/00ADR 49/00WHAT'S INCLUDED - 1 x 7 inch STEDI IRIS LED Headlight

The STEDI Tube Clamp Bull Bar Brackets offer a stable mounting platform for bullbars that are not fitted with tabs for UHF Antennas and LED lights. Made from cast aluminium with stainless steel fasteners keeping it strong yet lightweight as well as a polyester UV stable powder coat to reduce fade.Wi...

SHIPPING WEIGHT 6.3kg WHAT'S INCLUDED - 1 x LHS Vertical Support- 1 x RHS Vertical Support- 1 x Lower Radiator Support Bracket- 1 x Upper Boomerang Support Bracket- 1 x LHS Projection bracket- 1 x RHS Projection bracket- 1 x 60mm Rally bar tube- 4 x M8 Hex Head 20mm Bolts- 14 x M8 Allen Head 20mm Bolts- 4 x M6 Allen Head 18mm Bolts- 36 x M8 Flat Washers- 18 x M8 Nyloc Nuts- 4 x M6 Nyloc Nuts

Get your recovery done faster with a Carbon Shinbusta Recovery Hook!This is an absolute beast of a recovery hook.Specs. - 8000kg Rating Capacity- Destruction tested to 16000kg by Nata accredited testing agent (Mech Test Brisbane)- WLL - 4535 kg (WLL= Working Load Limit this is a rating for contin...

You send us your ECU and we'll have it remapped with a copy of our dyno tune to gain 7% more power.about this tune are in this post: https://jimny.co.nz/blogs/build/now-with-7-more-power.You need to send us your ECU, which we will update and send back to you on an overnight courier. We only need your ECU for about 24 hours, so you're not without your car for too long.

OPERATING TEMP -40°C - 60°CWHAT'S INCLUDED - 1 x STEDI LED Rock Light- 1 Rubber Pad with Stainless Screws & Bolts

Suitable for the updated range (new shape) of STEDI Surface 6 LED RGB Rock Lights and STEDI Surface 5700k LED Rock Lights, allowing mounting with a fixed 30°. WHAT'S INCLUDED - 1 x STEDI Surface Rock Light 30° Angled Bracket- Stainless Screws & Bolts

RATED 3A @ 12v

Stedi have designed an integrated driving light that effortlessly bolts up to your car's factory fog light mounts. Thanks to CREE's XHP 50 emitters, our all-new BOOST LEDs are capable of a peak beam throw of 311m @ 1 Lux and an impressive 1400 tested Lumens. Moreover, unlike factory halogen or LED f...

COMPATIBILITY STEDI ST3303 Pro & ST3301 Pro Light Bars ONLY

WEIGHT 0.1kg

Optional blackout cover for STEDI ST3303 Pro LED Light Bars - STEDI logo printAvailable in the following sizes: - ST3303 Pro 11 Inch- ST3303 Pro 18.4 Inch- ST3303 Pro 23.3 Inch- ST3303 Pro 28.2 Inch- ST3303 Pro 39 Inch Please Note: These covers are specifically designed to fit the STEDI ST3303 Pro LED Light Bars ONLY.

RATED 3A @ 12v

OPERATING TEMP -40°C to 60°CWHAT'S INCLUDED - 1 x 10W Mini LED Flush Mount- 2 x M6 Bolts- 2 x Nylock Nut- 2 x Flat Washer- Allen Wrench- Male & Female Deutsch Connectors

Looking for a durable and convenient way to mount your number plate during a winch recovery? Look no further than the !Compatible with both alloy hawse fairleads and roller fairlead mounting systems, this bracket allows you to easily mount your number plate over the fairlead outlet and pull it out o...

- Environmentally sealed and moulded Deutsch DT-2 connector with male wire tail included- RFI and EMI suppressed circuity ensure no interference with sensitive radio equipment- Fitted with Gore Breather Vent – Certified IP68 - Submersible to 3m- 304 Series Stainless Steel Bracket and FastenersBe...