Kiwisparks 167 views   2 clicks ♡

Schneider Domae RCBO (RCD) suitable for protecting domestic wiring circuits. These are combined earth leakage and overcurrent devices, manufactured to IEC61009-1 and AS/NZS61009-1. Marked 230 volts AC as required by Energy Safety for RCDs sold in NZ. Type A, 6kA, 30mA.Use the dropdown box to select which current rating you need: 6, 10, or 16 amp. For other ratings please use the new Resi9 range

Gewiss enclosure and caravan type IEC309 3 round pin 16 amp socket. Manufactured in Europe to EN60309 standard.- 4-way surface mounted enclosure- Legrand 16 amp 30mA Type A RCBO (RCD)- IEC309 16 amp 3 round pin caravan socket- IP67 weatherproof rating- Measures 100 x 260 x 95 deep

Hager Socket Outlet - DIN rail mounted to suit all modern switchboards, 15 amp, 2 pole auto switching, 44mm wide, with neon indication. Legal for caravans & transportables

Gewiss enclosure with RCD and 3 flat pin 15 amp socket.4-way IP67 rated enclosureSchneider 16 amp Type A 30mA RCBO (RCD), 230 volts AC to Standards3 flat pin 15 amp socket outlet in IP55 housingSurface mounting, easily wall mounted - could easily be mounted to replace an existing standard power pointMeasures 100 x 260 x 95 deep

4 way surface switchboard complete with DIN rail, neutral & earth busbars and labels. IP55 weatherproof rating with hinged door.Board measures 140w x 210h x 100dCaravan & Tiny House Switchboard Guide

This switch is designed to clip onto the DIN rail in any modern switchboard. The switch is double pole which means it can be used in any type of installation including caravans & transportables. Brand: Gewiss- 1 x 16 amp 2 pole switch, 1 way, 16 amps, 230 volts AC- 1 x Mounting clip for DIN rail- Same width as a single pole MCB, takes one space- Switchboard with switch fitted is SWB6S.0.1.2SW

Switchboard designed to allow caravans & motorhomes achieve compliance with AS/NZS 3001 and upgrade older caravans to electrical WOF standard. This board is easily customised to your requirements and is available in weatherproof and marine versions, please6 way surface switchboard (can also be mount...

Reverse polarity protection kit comprising changeover contactor & buzzer for mounting in a suitable DIN rail enclosure or switchboard. Disconnects the power to the caravan, boat, RV or transportable if the supply lead is wired incorrectly, designed to assist compliance with AS/NZS3001-2022 requireme...

4 way surface mounted switchboard complete with DIN rail, neutral & earth busbars and labels. Designed for caravans, motorhomes & transportables to comply with AS/NZS 3001-2-2022.Choose which board has the number of RCBOs to suit the number of circuits you run:SWB4S.116: 1 x 16 amp RCBO = 1 x power ...

Switchboards designed to allow caravans & motorhomes achieve compliance with the latest version of AS/NZS 3001 and upgrade older caravans to electrical WOF standard. These boards would also be used for a cabin or sleepout if it was possible to be moved and/or was plugged in on a caravan type supply ...

1 sheet of self-adhesive labels for switchboard circuit identification as required by AS/NZS3000

1 sheet of self-adhesive labels for switchboard circuit identification as required by AS/NZS3000, basic i/d set suitable for smaller boards

Comb busbar, insulated, 18-way, 33cm, suitable for MCB and slim RCBO terminals