Lighthouse Marine Equipment Ltd 65 views   1 clicks Claim this Business♡

(Pin for this is SKU: A1115)

Replacement Bennett EIC Wiring Harness 20Ft 6 Metre 499/EIC201This cable is used to link the EIC relay switch to the helm lower station control switch.Both ends are male multi pin.This cable has male plugs at both ends.The plugs are 14-pin, but there are only 13 wires.

10 x 1-1/4″ Full Thread Screw (Trim Tab to Transom Fastener) - EH1071High quality Bennett screwLength: 1 - 1/4"

These Bennett replacement pins are identical to the originals that came with the actuator and are designed to align the holes drilled in the trim plane—installation is simply bolting it in place. Restore function to damaged trim tabs by replacing only what is damaged using Bennett replacement part...

Actuator Piston O-Ring 220

The Bennett AR 512 Auto Trim Tab Retractor automatically moves the tabs to 'full-up' when the ignition is turned off. It assures that trim tabs are all the way up for trailering, hauling and storage. Easily installed under the instrument panel, the ATR connects to the trim tab control and engine ign...

An attractive and user-friendly, stand-alone helm control without the need for an external control unit. The and “brains" of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad.The Bennett Marine Electronic Indicator Control offers three features comb...

Bennett actuators are strong but flexible nylon/ fiberglass hydraulic cylinders. The piston-like arms push tabs into position.Fluid flows through a concealed hole in the upper hinge at the top of the actuator‚ thus eliminating external hoses subject to damage.Standard 13 3/4" Overall LengthThis actuator has four plastic rings around the base of the ram

Bennett EIC5000 electronic indicator control kitAn attractive and user-friendly, stand-alone helm control without the need for an external control unit. The and “brains" of the control unit are engineered directly into a single, space-saving, and simple-to-install keypad.Features Include:• Conve...

Port Pigtail Connector for EIC

Starboard Pigtail Connector for EIC- Pigtail Connector- Pairs with Bennett HPU- Side: Starboard (Green

Pigtail for Wire HarnessBennet PT109 Pig Tail (FEMALE - WIRE HARNESS SIDE) has female sockets in connector. The wires are colour coded for easy installation. This is the female plug connector that attaches wire harness to the male pump plug (PT110).

Trim Tab - HPU Valve Plunger

Spare part for Bennett marine trim tab system, VP1159 Valve Seat with O-Ring.

Replacement valve spring for the power unit of the Bennett Marine trim tab systems.

Trim Tab Hydraulic Hardware Pack - Dual actuator setup (2x port and starboard actuators

Bennett's CC3003P Actuator Upper Hinge with Coil is designed for hydraulic trim tab systems. Built specifically for use in a marine environment. Refer to manufacturer recommendations to ensure a proper fit. - Actuator upper hinge- For use with Bennett trim tabs- Color: Port - Red- Refer to manufacturer recommendations and guidelines to ensure a proper fit

Bennett's CC3003S Actuator Upper Hinge with Coil is designed for hydraulic trim tab systems. Built specifically for use in a marine environment. Refer to manufacturer recommendations to ensure a proper fit. - Actuator upper hinge- For use with Bennett trim tabs- Colour: Starboard - Green- Refer to manufacturer recommendations and guidelines to ensure a proper fit

Bennett Marine pioneered the Auto Tab Control (ATC) to make the boater's experience on the water even better. It does exactly what it says it does - interacting directly with your trim tab system to automatically monitor your boat's position and maintain the perfect cruising attitude. Hydraulic syst...