Lims Imports 29 views   1 clicks ♡

MEZ Beam Clamp - FL1 - FL2 - FL3The MEZ beam clamp, made from malleable cast steel, is VDS and FM approved. The FL2 and FL3 range are FM rated for sprinkler systems. Adjustable to suit a wide range of MEZ flange. The MEZ beam clamps have a safe working range of 1.2KN-3.5KN

Ceiling Bracket - 2720 - 2721 This ceiling bracket is ideal for isolating sound from duct work and equipment hung with M8 or M10 threaded rod. The solid galvanised steel bracket is bolted to the structure through a slotted hole that allows lateral and radial movement. Accuracy of attachment is not a...

Duct Hanger Bolt MEZ sturdy duct hanging bolt for suspending rectangular duct work with threaded rod. The hanger bolt is secured onto the MEZ flange corner and from there bolted to the threaded rod allowing the duct to suspended from its strongest point. The hanger bolt comes in three sizes to suit both styles of MEZ flange and to suit both M8 and M10 threaded rod.

Isolation Hanger - 2723 METU Isolation Hangers are the ideal product for isolating noise from suspended duct work through the use of a rubber damper placed between to steel tension brackets. They are intrinsically safe; in the event of fire disintegrating the rubber damper, the steel brackets will n...

MEZ Z Bracket MEZ provides a simple practical solution for hanging rectangular air duct and cable trays with the Z bracket. It has a load bearing capacity of 1000N and comes with a rubber mount to reduce noise and vibration. The Z bracket will suit M8 threaded rod.

MEZ Angle Bracket - 2750 - 2752 - 2754his galvanised angle bracket from MEZ is great for hanging rectangular duct work. It comes in three different sizes to accommodate a wide range of installation situations; 100mm, 200mm, 300mm. The rubber isolating grommet reduces sound and vibration

METU ALM Support Bracket - 2707 By far, METU's most popular support, this is an excellent bracket for suspending duct work with the use of threaded rods. A sturdy product that can bear loads up to 1500N. The large support surface prevents any deformation at the edge of the duct. The small profile ma...

MEZ - 1641 MEZ Lock Pin for vane rail, ribs, and partitions. Suitable for steel work 0.4 - 1.25 mm thick. The lock pin is hammered in until the seal is pressed into the metal vane. This method of installation allows the metal to be spiked into the seal without causing damage, and thus, providing high durability.

Stainless Steel Leaf Damper - 358E High quality MEZ (316) stainless steel damper for high flow air regulation. Robust, long lasting and easy to use. The MEZ stainless steel damper suits round and square ducts alike.Features: -Stainless Steel 316. -Suitable for round and square duct. -Clear indication of position.