Lykalyte 109 views   7 clicks Claim this Business♡

Required host firmware:Version 1.6.0 or newerNOTICE! To establish a wireless LoRa communication path, you will require at least two LoRa-enabled nodes (or a host device with a LoRa Add-on and a compatible gateway/receiver).Australia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are avail...

Required host firmware:Version 1.6.0 or newerNOTICE! To establish a wireless LoRa communication path, you will require at least two LoRa-enabled nodes (or a host device with a LoRa Add-on and a compatible gateway/receiver).Australia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are avail...

Scripting support:Yes (mJS scripting engine)NOTICE! Operates via continuous USB-C (5V, 1A) power supply. For safe and reliable operation, use a dedicated high-quality USB power adapter that maintains a stable 5V output. Avoid multi-port fast chargers whose power output fluctuates when other devices...

Gateway compatibility:Shelly BLU Gateway, Shelly Plus/Pro/Gen3/Gen4 devices, Zigbee 3.0 HubsNOTICE! To display telemetry within the Shelly Smart Control app, a compatible gateway (such as a Shelly BLU Gateway or any Shelly Plus, Pro, Gen3, or Gen4 device) is required. Batteries (2x AA Lithium) and m...

MQTT support:YesNOTICE! This unit requires a suitable 12V or 24V DC external LED power supply (driver). Do not connect this device directly to AC mains (110-240V AC) power. Ensure total combined current across all 5 channels does not exceed 16A.Australia and New Zealand Safety Standard (AS/NZS) comp...

MQTT:YesDesigned strictly for low-voltage sensor monitoring and actuator environments. Do not connect directly to high-voltage mains circuits.Australia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are available upon request for declared articles sold by Lykalyte. Some components and non...

Pin assignments:5V: 5 V Output - IO1: DS18B20 / DHT22 / Analog Input (0-2.5 V) / Digital I/O - IO2: Digital I/O - IO3: Digital I/O - GND: GroundDesigned strictly for low-voltage sensor monitoring interfaces. Never connect high-voltage AC mains wiring to this accessory block or its terminals.Australi...

Supported hardware:Shelly EM Gen3, Shelly EM Gen4Installation Note: Always update your connected device's configuration settings to reflect an 80A CT transformer profile. Leaving the hardware profile on a default value may cause current telemetry calculations to display higher values than actual usa...

Supported integration protocols:Modbus TCP, MQTT, RPC, Webhooks (20 hooks, 5 URLs per hook)NOTICE! This monitoring device is designed strictly for energy calculation and does not contain an internal dry-contact switching relay. Physical contactor load management requires the addition of the Shelly P...

The Shelly Bypass is a critical accessory for neutral-wire-free installations, particularly where low-impedance loads under 20W at 240VAC demand stable operation. By providing the necessary load path, it eliminates compatibility issues and ensures consistent dimming performance across your Shelly de...

Flash:8 MBMax Load is the Maximum rated Load and it is not recommended that this device is used for anything more than short duration at or near the Maximum.Higher loads require sufficient allowance for excess heat.Australia and New Zealand Safety Standard (AS/NZS) compliant, SDoC available on reque...

Typically used for:- Centralized smart home management- Commercial and hospitality control hubs- Advanced Home Assistant & Shelly Cloud DashboardsThe a high-performance 10.1-inch smart home control panel designed to serve as the ultimate central hub for monitoring and automation. Featuring a crisp H...

Typically used for:- Room management- Centralized smart home control- Home Assistant & Shelly Cloud DashboardsThe a premium 6.95-inch wall-mounted touch panel designed to be the central hub of your smart home. Featuring a high-resolution 1440x720p display, it allows for seamless control of all Shell...

Shelly current transformers (CTs) convert large currents into small, standardized values for precise measurement. They deliver a secondary current that is accurately proportional to the primary current, ensuring reliable data. These transformers impose a minimal load on the primary circuit, optimizi...

Flash:4 MBMax Load is the Maximum rated Load and it is not recommended that this device is used for anything more than short duration at or near the Maximum.Higher loads require sufficient allowance for excess heat.Australia and New Zealand Safety Standard (AS/NZS) compliant, SDoC available on reque...

Compatible Device:Shelly Flood Gen4Shelly Smart Control App Google PlayShelly Smart Control App Apple

KVS (Key-Value Store):YesAustralia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are available upon request for declared articles sold by Lykalyte. Some components and non-declared products may not require SDoCs under regulations.Shelly Smart Control App Google PlayShelly Smart Control A...

Shelly DS18B20 Temperature sensor DS18B20 (1.0 meter cable)Stainless steel shell (6 50mm)Lead length 100cm3.0V ~ 5.5V power supply9 ~ 12 bits adjustable resolutionTemperature range of -55 ~ 125°COutput leads: red (VCC), yellow (DATA), black/blue (GND)Can be used with the Shelly Plus AddOnhttps://ww...

Shelly Wall Display H&T Typically used for:- Room management- Thermostat- Centralized controlDiscover the perfect addition to your Shelly devices with the Shelly Wall Display, now combined with Shelly BLU H&T for precise climate control. This 4" wall display offers centralized control and monitoring...

MQTT:Yes Max Load is the Maximum rated Load and it is not recommended that this device is used for anything more than short duration at or near the Maximum.Higher loads require sufficient allowance for excess heat.Australia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are available upon...

KVS (Key-Value Store):YesAustralia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are available upon request for declared articles sold by Lykalyte. Some components and non-declared products may not require SDoCs under regulations.Shelly Smart Control App Google PlayShelly Smart Control A...

MQTT:YesMax Load is the Maximum rated Load and it is not recommended that this device is used for anything more than short duration at or near the Maximum.Higher loads require sufficient allowance for excess heat.Australia and New Zealand Safety Standard (AS/NZS) compliant. SDoCs are available upon...

MQTT:YesResistive loads only, Max Load is the Maximum rated Load and it is not recommended that this device is used for anything more than short duration at or near the Maximum.Higher loads require sufficient allowance for excess heat.Australia and New Zealand Safety Standard (AS/NZS) compliant. SDo...

Communication/negotiation modeТhe switch is fully capable in auto-negotiation mode as per IEEE 802.3(Half duplex (HDX), Full duplex (FDX), Back pressure, pause, Flow control (IEEE 802.3))Australia and New Zealand Safety Standard (AS/NZS) compliant, SDoC available on request.Shelly Smart Control App...