MyTools 280 views   124 clicks Claim this Business♡

ProSilver 15 is used for high vibration joints on refrigerator copper pipes, and also for brazing contacts onto copper-based parts because of its good flow characteristics and good electrical conductivity. It is not suitable for steel or alloys containing more than 10% nickel.750mm rod length(5 ROD PACK)LTAP15B2

The Prosilver 45T alloy was developed as the cadmium free replacement for ProSilver 45. It is suitable for carbon and low alloy steels, copper and copper alloys (aluminium bronzes with more than 2 percent aluminium require special flux), nickel and nickel alloys, and stainless steels for food and m...

3 flint type flint lighter featuring a simple, ergonomic, rigid arm design that concentrates more force onto the flint• The rigid arm design concentrates more force onto the flint• End cup pockets the gas for quicker lighting• Spare flints dialled into position via adjusting nut• Flint centred on abrasion cylinder for even wear• Simple ergonomic design

Suitable for tips, nozzles and hi-speed nozzles. Removes carbon or loose slag without damaging gas parts. Also contains a wire brush for cleaning slots in Type 44 nozzles.

This alloy was developed as the cadmium free replacement for ProSilver 34.Suitable for carbon and low alloy steels, copper and copper alloys (aluminium bronzes with more than 2 percent aluminium require special flux), nickel and nickel alloys, and stainless steel. 0.5kg packClassification: A18Standard: AS/NZS 1167.1ProSilver 34T LTAT3592

ProFill Mang Bronze is suitable for steel, cast iron and malleable iron Braze welding Low fume and high strength, Self-fluxingClassification: RBCuZn-CStandard: AWS A5.8GRMB1605 0.5KG

ProSilver 15 is used for high vibration joints on refrigerator copper pipes, and also for brazing contacts onto copper-based parts because of its good flow characteristics and good electrical conductivity. It is not suitable for steel or alloys containing more than 10% nickel.750mm rod length(5 ROD PACK)LTAP15B2

The Prosilver 45T alloy was developed as the cadmium free replacement for ProSilver 45. It is suitable for carbon and low alloy steels, copper and copper alloys (aluminium bronzes with more than 2 percent aluminium require special flux), nickel and nickel alloys, and stainless steels for food and m...

ProFill Mang Bronze is suitable for steel, cast iron and malleable iron Braze welding Low fume and high strength, Self-fluxingClassification: RBCuZn-CStandard: AWS A5.8GRMB3205 0.5KG

The Prosilver 45T alloy was developed as the cadmium free replacement for ProSilver 45. It is suitable for carbon and low alloy steels, copper and copper alloys (aluminium bronzes with more than 2 percent aluminium require special flux), nickel and nickel alloys, and stainless steels for food and m...

Spring loaded work clamp made from carbon steel, heat-treated plus nickel and chrome plating, available in a variety of amperage'sBOC10103

Flux powder for copper, brass gas welding and steel brazing: use as a powder or mix with water for a paste For copper, brass gas welding and steel brazing Suitable for higher temperatures and extended cycle times Suitable for ProFill bronze alloy rangeUse as a powder or mix with water for a paste.Temperature range 750-1000°C

1,000 kPa single stage nitrogen regulator with fully encapsulated valve for improved performance.Bottom InletOutlet Connection: 5/8-18 UNFInlet Connection: Type 50Gas Mixture Type : NitrogenOutlet Pressure: 1000 kPaStandard: AS4267

400g nozzle dip anti-spatter gel that prevents weld spatter from adhering to metal surfaces and welding components Ideal for steels, aluminium and alloys Non-flammable Paintable formula produces uniform spray without bubbles

BOC 6000 Argon shielding gas regulators have been designed for MIG and TIG mixed gas and pure gas processes. BOC shielding gas regulators and flowmeters meet the requirements of AS 4267 under AS 2473: 1990 requirements for cylinder valve connections.• Bottom Inlet

150 kPa single stage acetylene regulator with fully encapsulated valve for improved performance. BOC is proud to present the BOC 8000 range of regulators. The standards achieved in their design have resulted in a product at the leading edge of performance, reliability and safety. BOC Regulators are ...

BOC welding tips are engineered to provide easy handling, high performance and added protection in welding and brazing operations. Constructed from long-lasting, high performance copper for good heat dissipation, longer life and turbulence-free flame.

Pack of 2 standard adjustable nozzles for Tweco No. 4 and TWE 4 torches, 24-62TWECO B24A/62

Available in a range of sizes, these Oxy-acetylene cutting nozzles are precision machined and hand-finished to give a positive seat.• The smoother nozzle surface reflects heat and reduces spatter accumulation• Every nozzle is inspected and flame-tested at the point of manufacture

Incorporates a variable velocity gas mixing process to ensure total mixing for a smooth, stable flame. It can also be used for oxy-LPG brazing.

1,000 kPa single stage nitrogen regulator with fully encapsulated valve for improved performance. BOC is proud to present the BOC 8000 range of regulators. The standards achieved in their design have resulted in a product at the leading edge of performance, reliability and safety. BOC Regulators ar...

.Welding blanket made from textured, ‘E’ glass fabric with a heatset finish and plain weave. A continuous filament glass fabric that has undergone a special heat cleaning processHeavyweight fabric commonly used for welding and thermal protection against molten metal slag, fire and sparksHeat treatment reduces smoke emissions from the fabric and helps to set the weave pattern

The BOC Smootharc Advance II MIG 250R is a single-phase welding machine which can be used for MMA, MIG and fluxcored weldingThe BOC Smootharc Advance II MIG 250R is a single-phase welding machine that’s reliable for any task. This versatile machine can be used for MMA, MIG and fluxcored welding an...

BOC 6000 Argon shielding gas regulators have been designed for MIG and TIG mixed gas and pure gas processes. BOC shielding gas regulators and flowmeters meet the requirements of AS 4267 under AS 2473: 1990 requirements for cylinder valve connections. Bottom Inlet Key Features Outlet Pressure: 150 k...