Newmanz RC Direct 27 views   1 clicks

mini bike and grass cart parts
1 to 15
×
  • $6.90 +
    Battery Regulator / Rectifier 4 Pin
    4 pin regulator / rectifier used to return voltage and charge the bikes battery.- 12 Volt systems
    Visit Store 0 0
  • $34.90 +
    Battery Regulator / Rectifier 5 Pin
    5 pin regulator / rectifier used to return voltage and charge the bikes battery.- 12 Volt systems- Built in voltage regulator
    Visit Store 0 0
  • $28 +
    Stator Magneto Type 1
    Kick start 70cc to 140cc 12Volt Stator / Magneto for use in horizontal 4 stroke engines.- 2 coil- Loncin- Lifan- Zhongshen
    Visit Store 0 0
  • $85 +
    Pocketbike HP Exhaust Pipe
    Performance muffler exhaust system for 49cc A115 & GPA115 style 2 stroke engines.- Stainless steel S bend race exhaust- Longer pipe improves engine performance- Improves power and acceleration
    Visit Store 0 0
  • $45 +
    Pocket bike Reduction Gearbox
    Reduction gearbox unit for the 49cc A115 2 stroke engines- If you are using wheels bigger than 6.5 inch ( mini dirt bikes & mini gokarts )- If you require more low end torque ( heavier riders )- This uses the T8F pitch drive chain (11mm wide )- Ration: 3.3.1- Stronger double gear chain version
    Visit Store 0 0
  • $25 +
    Pocket bike Exhaust
    Standard Pocket bike exhaust pipe for A115 49cc 2 stroke engines.- Riveted stronger muffler- Braced stronger pipe
    Visit Store 0 0
  • $35 +
    Exhaust Pipe 50cc to 140cc
    Exhaust pipe for 50cc to 140cc 4 stroke horizontal engines- Total Length : 760mm- Muffler Length : 210mm- Manifold Mounting Holes : 45mm PCD- Intake pipe diameter : 32mm
    Visit Store 0 0
  • $65 +
    HP Exhaust Pipe 50cc to 140cc
    Exhaust pipe for 50cc to 140cc 4 stroke horizontal engines- Total Length : 760mm- Muffler Length : 210mm- Manifold Mounting Holes : 45mm PCD- Intake pipe diameter : 32mm
    Visit Store 0 0
  • $84 +
    NRCD Race Carburettor
    - NRCD Racing Carburetor FT PWK- 21mm to 30mm models available- Flat-slide for increased air flow- Polished intake ports- Tuneable mixture screw- Dual atmospheric vents- Separate float bowl vent- Easier cold starting- Smoother idle and acceleration- Manual choke- Keihin PWK power needle and main jet...
    Visit Store 0 0
  • $42 +
    24 volt 250 watt motor controller
    NRCD 24V Controller module. These controllers we had made specifically for durability, these are not the cheaper generic " toy " versions.- These are the best available Electric scooter or E bike controller available- Heavy duty heat sink and components- Fully labelled for easy connection "plug and...
    Visit Store 0 0
  • $41 +
    36 volt 800 watt motor controller
    NRCD 36V Controller module. These controllers we had made specifically for durability, these are not the cheaper generic " toy " versions.- These are the best available Electric scooter or E bike controller- Heavy duty heat sink and components- Fully labelled for easy connection "plug and play"- Thi...
    Visit Store 0 0
  • $19.90 +
    Wiring Loom for Loncin, Lifan 70cc to 250cc engine
    Will Fit Four-Stroke Loncin, Lifan and similar 70cc, 110cc,150cc,200cc,250cc engines- Electric or kick start versions available
    Visit Store 0 0
  • $19.90 +
    Grass Kart Pull Start
    GX160, GX200 Loncin & Lifan 6.5hp engine pull starter
    Visit Store 0 0
  • $7.90 +
    Fuel hose and filter
    Plastic fuel filter & fuel hose - Outer diameter of inlet/outlet is 6.7mm- Inner diameter of inlet/outlet is 4mm- Body Length:54mm x Diameter 30mm Fuel Hose Size: - Inner Diameter: 4.5mm - 6.5mm- Out Diameter: 8mm
    Visit Store 0 0
  • $24 +
    B1 Blata Rep clutch
    Clutch for the water cooled Blata rep and MYT-A4 engines
    Visit Store 0 0
×