NZ Performance Wholesale 191 views   6 clicks Claim this Business♡

280/280 Degrees advertised duration, 12.50mm/12.00mm lift.280 Degree racing cams to suit street / strip engines with a large turbo. Requires KVS93 valve springs. KVS93-BT valve springs are required if running over 2 bar boost.

92lb seat pressure at 39.90mm installed height. Coil Bind at 23.25mm. Suits OEM retainer.NISSAN SR20DET. Drop-in PACALOY high performance single valve spring set. Use with OEM retainers and spring base. 92lb seat pressure at 39.90mm installed height. Coil Bind at 23.25mm.

95lb seat pressure. 15.00mm maximum lift.NISSAN SR20DET. Premium quality ovate wire Beehive valve spring set with Titanium retainers. Nano-peen and gold nitride surface finish process for ultimate strength. Suits high rpm, high boost turbo engines. Use OEM spring base to give 95lb seat pressure. 15...

260/266 Degrees advertised duration, 11.80mm/11.00mm lift.Street performance cams to suit small turbo upgrade. High lift and low duration for great low end, and midrange power. Require KVS93 valve springs.

254/254 Degrees advertised duration, 11.30mm/11.30mm lift.Drop-In cam to suit factory valve springs. Must retain stock rev limit and not exceed 1.5 bar of boost.

284/290 Degrees advertised duration, 12.50mm/12.00mm lift.284/290 Degree drag racing cams to suit large turbo, high boost SR20 motors using E85 or Methanol. Requires KVS93-BT valve springs.

266/270 Degrees advertised duration, 11.00mm/11.00mm lift.High performance "drop in" cams to suit stock valve springs. Requires ECU re-tune.

268/272 Degrees advertised duration, 12.00mm/11.50mm lift.Ultimate drift spec cams featuring maximum lobe area and low duration for fast spool and lots of top end power. Requires KVS93 valve springs. KVS93-BT valve springs are required if running over 2 bar boost.

Intake valve guide for Nissan SR20DET. OD: 10.03mm. ID: 5.95mm. Set of 8. High quality precision machined. Made from our own proprietary Manganese Bronze. All guides need honing after fitment.

Exhaust valve guide for Nissan SR20DET. OD: 11.02mm. ID: 6.90mm. Set of 8. High quality precision machined. Made from our own proprietary Manganese Bronze. All guides need honing after fitment.