NZ Pipe 297 views   3 clicks

Plumbing supplies including bathroom, toilet, kitchen plumbing supply and tapwares. We sell high quality plumbing supplies for your home renovation. Also, we sell gutters (spouting), polybutylene pipes and fittings, brass fittings, PVC drainage pipes and fittings, plumb quicks, flexi hoses, toilet pan connectors, MDPE
1 to 24 of 57
AA •
×
  • [PSH1021] PB Push-Fit Adaptor 15mm (Female)
    $6 +
    [PSH1021] PB Push-Fit Adaptor 15mm (Female)
    PB Push-Fit Adaptor 15mm (Female)The PB Push-Fit Adaptor 15mm (Female) is a high-quality transition fitting designed to connect 15mm PB pipe to threaded valves, taps, and plumbing fixtures in hot and cold potable water systems.Its push-fit design allows for fast and easy installation without the nee...
    Visit Store 0 0
  • [BRF1029] Brass Reducing Tee 20x15x20mm (Female)
    $8.90 +
    [BRF1029] Brass Reducing Tee 20x15x20mm (Female)
    Brass Female Reducing Tee 20x15x20mmThe Brass Female Reducing Tee 20x15x20mm is a threaded fitting designed to create a three-way branch connection within a pipe run, allowing a reduced 15mm branch line to be connected between two 20mm runs.Featuring female threaded connections at all three points...
    Visit Store 0 0
  • [BRF1030] Brass Reducing Tee With Crox Nuts 20x15x20mm (Male)
    $16.80 +
    [BRF1030] Brass Reducing Tee With Crox Nuts 20x15x20mm (Male)
    Brass Reducing Tee With Crox Nuts 20x20x15mm (Male)The Brass Reducing Tee With Crox Nuts 20x15x20mm (Male) is a compression fitting designed to create a three-way branch connection within a copper pipe run, allowing a reduced 15mm branch line to be connected between two 20mm runs.Featuring male thre...
    Visit Store 0 0
  • [PLS1003] Apex Copper Bore Cap 20mm
    $10 +
    [PLS1003] Apex Copper Bore Cap 20mm
    Apex Red Plastic Plug 20mmThe Apex Red Plastic Plug 20mm is a blanking cap designed to protect and temporarily seal a 20mm copper bore fitting, commonly used to keep pipework clean and free of debris during storage, transport, or between installation stages.Featuring a black plastic body with a red...
    Visit Store 0 0
  • [PEX1035] Gas Pipe Clips x50 Pack
    $8.50 +
    [PEX1035] Gas Pipe Clips x50 Pack
    Gas Pipe Clips 50 PackOur Gas Pipe Clips (50 Pack) are designed to securely fasten gas pipework to walls, floors, and structural surfaces, ensuring a safe, stable, and professional installation. Ideal for residential, commercial, and outdoor gas systems, these clips help keep pipework properly align...
    Visit Store 0 0
  • [PEX1033] Pex Pipe Clips Red x20 Pack
    $7.50 +
    [PEX1033] Pex Pipe Clips Red x20 Pack
    PEX Pipe Clips 20 PackOur PEX Pipe Clips (20 Pack) are designed to securely fix PEX pipe to walls, floors, and structural surfaces, ensuring a neat, stable, and professional plumbing installation. Ideal for both residential and commercial plumbing systems, these clips help keep pipework firmly in pl...
    Visit Store 0 0
  • [MDP1014] MDPE Tee 25mm 3/4" (Male)
    $8.50 +
    [MDP1014] MDPE Tee 25mm 3/4" (Male)
    The MDPE Tee 25mm x 3/4" (Male) is a compression fitting designed to create a three-way branch connection within a 25mm MDPE blue water pipe run, allowing a threaded outlet to be added without cutting into and re-joining the main pipe run elsewhere.The two inline connections use standard MDPE compre...
    Visit Store 0 0
  • [LDP1004] Hansen Hex Socket
    $2.40 +
    [LDP1004] Hansen Hex Socket
    The Hansen Hex Socket is a threaded fitting designed to connect two male threaded fittings together, featuring a hexagonal centre section for easy wrench access during installation.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent resistance to weather, termit...
    Visit Store 0 0
  • [LDP1007] Hansen Threaded Elbow (Female)
    $3.60 +
    [LDP1007] Hansen Threaded Elbow (Female)
    The Hansen Threaded Elbow (Female) is a 90-degree fitting designed to connect two male threaded fittings at a right angle, allowing a directional change within a threaded pipe run.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent resistance to weather, termite...
    Visit Store 0 0
  • [LDP1006] Hansen Threaded Tee (Female)
    $4.10 +
    [LDP1006] Hansen Threaded Tee (Female)
    The Hansen Threaded Tee (Female) is a three-way fitting designed to connect three male threaded fittings together, allowing a branch line to be added within a threaded pipe run.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent resistance to weather, termites...
    Visit Store 0 0
  • [LDP1008] Hansen Threaded Elbow (Male/Female)
    $3.60 +
    [LDP1008] Hansen Threaded Elbow (Male/Female)
    The Hansen Threaded Elbow (Male/Female) is a 90-degree fitting designed to connect a male threaded fitting to a female threaded fitting at a right angle, allowing a directional change within a threaded pipe run.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent...
    Visit Store 0 0
  • [LDP1009] Hansen Hex Screw Cap
    $1.85 +
    [LDP1009] Hansen Hex Screw Cap
    The Hansen Hex Screw Cap is a threaded fitting designed to cap off and seal a male thread, providing a clean, secure termination point within a threaded pipe run.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent resistance to weather, termites, fungi, and bact...
    Visit Store 0 0
  • [LDP1010] Hansen Hex Screw Plug
    $0.99 +
    [LDP1010] Hansen Hex Screw Plug
    The Hansen Hex Screw Cap is a threaded fitting designed to cap off and seal a male thread, providing a clean, secure termination point within a threaded pipe run.Constructed from high quality glass fibre reinforced nylon, this fitting offers excellent resistance to weather, termites, fungi, and bact...
    Visit Store 0 0
  • [LDP1012] Hansen Straight Coupling
    $6.20 +
    [LDP1012] Hansen Straight Coupling
    The Hansen Straight Coupling is used for connecting Low Density Polyethylene (LDPE) pipe and Enduroflex, and can also be used to connect other flexible pipe and hose.This simple, one-piece fitting has no loose components to lose, rust, or corrode. Installation is fast and easy: simply push the pipe...
    Visit Store 0 0
  • [LDP1011] Hansen Straight Coupling (Male)
    $5.60 +
    [LDP1011] Hansen Straight Coupling (Male)
    The Hansen Straight Coupling (Male) is used for connecting Low Density Polyethylene (LDPE) pipe and Enduroflex to female BSP threads, and can also be used to connect other flexible pipe and hose.This simple, one-piece fitting has no loose components to lose, rust, or corrode. Installation is fast an...
    Visit Store 0 0
  • [LDP1013] Hansen Straight Coupling (Female)
    $6.90 +
    [LDP1013] Hansen Straight Coupling (Female)
    The Hansen Straight Coupling (Female) is used for connecting Low Density Polyethylene (LDPE) pipe and Enduroflex to male BSP threads, and can also be used to connect other flexible pipe and hose.This simple, one-piece fitting has no loose components to lose, rust, or corrode. Installation is fast an...
    Visit Store 0 0
  • [LDP1014] Hansen Tee Connector
    $12 +
    [LDP1014] Hansen Tee Connector
    The Hansen Straight Coupling (Female) is used for connecting Low Density Polyethylene (LDPE) pipe and Enduroflex to male BSP threads, and can also be used to connect other flexible pipe and hose.This simple, one-piece fitting has no loose components to lose, rust, or corrode. Installation is fast an...
    Visit Store 0 0
  • [LDP1015] Hansen Bend
    $11.90 +
    [LDP1015] Hansen Bend
    The Hansen Bend is a 90-degree fitting used for connecting Low Density Polyethylene (LDPE) pipe and Enduroflex to LDPE pipe and Enduroflex, allowing a directional change within a pipe run. It can also be used to connect flexible pipe and hose.This simple, one-piece fitting has no loose components to...
    Visit Store 0 0
  • [LDP1016] Hansen Bracket Elbow
    $13.10 +
    [LDP1016] Hansen Bracket Elbow
    The Hansen Bracket Elbow is a 90-degree fitting used for connecting taps to Low Density Polyethylene (LDPE) pipe and Enduroflex, and can also be used to connect taps to other flexible pipe and hose.Featuring a female BSPT threaded connection on one end (for the tap) and a push-fit poly connection on...
    Visit Store 0 0
  • [SNP1001] PVC DWV SN16 Pipe
    $105 +
    [SNP1001] PVC DWV SN16 Pipe
    The PVC DWV SN16 Pipe is a heavy-duty, high stiffness PVC-U pipe designed for drain, waste, vent, plumbing, domestic, and general municipal drainage applications, suitable for larger-scale civil and commercial installations.This pipe uses a rubber ring joint (RRJ) system rather than solvent cement...
    Visit Store 0 0
  • [CRP1051] PB Crimp Buteline Equal Tee
    $6.98 +
    [CRP1051] PB Crimp Buteline Equal Tee
    PB Crimp Buteline Equal Tee – 15mmThe Buteline 15mm PB Crimp Equal Tee is a high-quality plumbing fitting designed for creating a secure three-way connection between 15mm polybutylene (PB) pipes. Ideal for residential and commercial plumbing applications, it provides a reliable branch connection f...
    Visit Store 0 0
  • [CPF1020] Copper Brazing 88 Degree Bend
    $2 +
    [CPF1020] Copper Brazing 88 Degree Bend
    Copper Brazing 88 Degree BendThe Copper Brazing 88 Degree Bend is a copper fitting designed to change the direction of copper pipe runs, providing a slight fall advantage over a standard 90-degree bend to help maintain effective flow and reduce the risk of restriction at the joint.Installed using st...
    Visit Store 0 0
  • [PVC1011] PVC In Pipe Bend 45 Degree 100mm
    $4.80 +
    [PVC1011] PVC In Pipe Bend 45 Degree 100mm
    PVC In Pipe Bend 45 Degree 100mmThe PVC In Pipe Bend 45 Degree 100mm is a solvent-weld fitting by ERA, designed to introduce a gentler directional change within a 100mm PVC waste pipe run, offering less flow restriction than a 90-degree bend.Installed using standard PVC solvent cement, this bend for...
    Visit Store 0 0
  • [BRF1028] Brass Adaptor With Chamfer 1/2" (Male/Female)
    $24 +
    [BRF1028] Brass Adaptor With Chamfer 1/2" (Male/Female)
    Brass Adaptor With Chamfer 1/2"The Brass Adaptor With Chamfer 1/2" is a threaded fitting designed for gas plumbing applications, connecting a male thread on one end to a female thread on the other to allow gas pipework to transition between different fittings or fixtures.Featuring a chamfered edge...
    Visit Store 0 0
×