Palmside 9 views Claim this Business♡

Adjustable Camber Caster tops used on our gravel cars, multi holes for easy of adjustment plus sliding carries, top quality made in and sold as a pair.Roller bearing has a 19mm id and pcd is for the larger strut top 115mm pcd.

Left and right available ready for GP4 tubePrice is per stub axle..

New bare stub and bilstein tube welded together

Group 4 tube with threads for platform that will take the upside down 260/60 or 300/70 insert, these can be welded into Capri stub or we can supply stub and fitment.there are two different lengths - short / fits 300/70 track use or long for 260/60 gravel, 300/70 road rally or road cars.please note these currently will not pass certification.Stub $325 & Fitting $175

Bilstein 300/70 insert short for taramc to suit 40mm id Bilstein tube.

Bilstein Thickwall tube to take 40mm upside insert, this has the 4 inch spring platform already fitted.please note these need welding into a stub and this wont pass certification.

New Repro Stub and Bilstein Tube either adjustable Platform of fixed, to take Bilstein Inserttube $210, stub $325 and welding $200

2 1/4 lower nut, platform and top spring hat or lower nut to run with Bilstein Tube

2 1/4 lower nut & 4 inch platform to run with larger spring using original capri top hat, thread suited to bilstein tube as per group 2 or group 4

260/60 Bilstein 40mm insert as per used in Group 4 escort each

300/70 Bilstein 40mm insert as per used in Group 4 escort each

Brand new heavy duty stub axles for Capri, still runs same size bearings and hubs just made from better material than the $375 one we sell, recommended for MCA suspension for Gravel and Tarmac

Larger stub axle which will require a large hub, bell and bearingsSimilar to that pictured but with bigger pin,Sold individually per side

MCA is the leading non canister shock found in most of the top performing Escorts rallying in NZ, we can also supply for Corolla, Celica, Mazda and other brands.

Ford Escort rear shock to replace Group 4 turreted shock / spring fitment, spring is additional $150MCA is the leading non canister shock found in most of the top performing Escorts rallying in NZ, we can also supply for Corolla, Celica, Mazda and other brands.

Threaded tube platform kit to run with a 50mm shock tube (ID of tube is 51.9mm), comes as threaded tube 6 inches long with nuts and top for spring, - top cap can be round hole or D cap for Bilstein style - sold as eachwe also carry a range of springshttps://palmside.co.nz/products/coil-springs-2-25-id-in-different-rates-sold-as-pair? pos=23& sid=bae69849b& ss=r

for standard Capri legs

Gas shock absorber to suit Ford Escort MK1Easy to fit and really perform well.

Supplied as a set for 2 struts, 2 x 5/8 nuts, detent washers and cages Application: - Ford Capri Mk1 1969-1974- Does not fit stubs with castle type bolts between studs- Ford Capri Mk2 1974-1978- Ford Capri Mk3 including 2.8i V6 (not 3.0 V6) 1978-1986- Ford Cortina Mk3 1970-1976- Ford Cortina Mk4 197...

Escort RS / Capri struts to OEM specification when upgrading Escort 11/1300 struts or building a stock RS without the requirement of BIlstein struts. These brand new units allow the fitment of aftermarket inserts such as Gaz, KYB or AVO suspension. They will accept the superior hubs/bearings and bra...