Parkland Products 188 views   1 clicks ♡

Lock-Type compression fittings. PN 6. Ideal for the development of drip irrigation systems.

Lock-Type compression fittings. PN 6. Ideal for the development of drip irrigation systems.

A complete range of acetal fittings with double coupling for dripline. Sharp connectors provide a secure seal and leak-free connection. Can be used without clamps. Suitable for low-pressure micro-irrigation systems such as residential gardens, greenhouses and vegetable gardens.

Lock-Type compression fittings. PN 6, diameters 16 and 20. Ideal for the development of drip irrigation systems.

Lock-Type compression fittings. PN 6, diameters 16 and 20. Ideal for the development of drip irrigation systems.

A complete range of acetal fittings with double coupling for dripline. Sharp connectors provide a secure seal and leak-free connection. Can be used without clamps. Suitable for low-pressure micro-irrigation systems such as residential gardens, greenhouses and vegetable gardens.

16mm Flushing End Cap for Toro Drip-In Dripline.

Used for connecting two (2) driplines to a submain riser DocumentationToro Drip-Loc Data sheet (Metric)

Toro Drip-Loc Joiners (complete with rings)Used for joining or repairing driplines.

Grommets for Drip-Loc Take-Offs. Rubber Double Flanged

- Materials: Body - PP / Acetal, O-Ring - EPDM, Handle - PP- Max. working pressure: 4kg/cm2

Materials: AcetalThreads: BSPT / NPTMax. working pressure: 4kg/cm2

Materials: AcetalThreads: BSPT / NPTMax. working pressure: 4kg/cm2

Features:- Simple to use ergonomic design- Tap Adaptor suits Snap-On connections.- UV stabilised materials for long life.

A range of fittings and adaptors to use with quality micro tubing in low pressure irrigation systems. A range of sizes suit various tube configurations.Features- Single Barb configurations for connecting to micro or supply tubing. ApplicationsHome gardens, landscaping and glasshouses.

A range of fittings and adaptors to use with quality micro tubing in low pressure irrigation systems. A range of sizes suit various tube configurations.Features- Single Barb configurations for connecting to micro or supply tubing.- Micro Tee connects 4 mm ID micro tube to lateral line.ApplicationsHo...

A range of fittings and adaptors to use with quality micro tubing in low pressure irrigation systems. A range of sizes suit various tube configurations.Features- Single Barb configurations for connecting to micro or supply tubing. ApplicationsHome gardens, landscaping and glasshouses.

- Materials: Body - PP / Acetal, O-Ring - EPDM, Handle - PP- Max. working pressure: 4kg/cm2

- Materials: Body - PP / Acetal, O-Ring - EPDM, Handle - PP- Max. working pressure: 4kg/cm2

The specially designed Hippo Clamp range provides a fast and secure clamping solution for irrigation systems. Manufactured to the highest standards, they ensure you’ll get the best result every time. The Hippo Clamp range has been UV stabilised and is corrosion resistant which provides long lastin...

Use an In Line tap to isolate specific zones in your watering system. In this instance, the 4mm Threaded In Line tap can be screwed into rigid risers or other rigid poly tube. - Use with 4 mm rigid polyethylene tubing- Used to regulate water flow or isolate a watering zone- Can be used to isolate in...

Polyethylene Barbed JoinersThese fittings offer excellent flow dynamics improving performance and ensuring an uninterrupted flow around garden beds and lawns. Perfect of extending or repairing water systems.Features - Mounting hole for secure installation- Secure with Locking Clamps or Loc-Sure Clam...

Polyethylene Barbed ElbowThe Barbed Elbow is used to redirect water flow through poly tube by bending the tube at a right angle (90 degrees)The 4mm barbed elbows are used to join 4mm poly tube or Drip Eze to 4mm poly or Drip Eze at right anglesFeatures - Redirects water flow- Secure with Locking Cla...