Parkland Products 108 views   1 clicks Claim this Business♡

Heron’s most powerful two wire irrigation controller with industry leading surge suppression technology. Whether your installation is for farming, horticulture landscape or sports, the HTpro provides an extremely reliable and flexible solution for irrigating over a large area.Stay Connected - HTpr...

For more info on this product please call.

The GME PSA Series of Power Supplies use traditional semiconductor technology to produce highly regulated 13.8V DC output from a 240V AC source. This power supply is suitable for most communications equipment applications or where a stable regulated DC voltage is required.Features: - Very low ripple...

The optical pump start will switch on a 24V AC output whenever there is 30V on the two-wire cable. It has a 30mm isolation between the two-wire cable and the pump control providing excellent immunity to electrical surges.Requires a 24V AC supply. The 24V AC supply can be provided by using Heron’s ...

The Heron indoor temperature sensor is designed to measure Glass House indoor temperature. It will typically connect to a Heron Environmental controller base unit or to the remote zone controller.

The simplest weather station for ET calculation includes a rain gauge and atemperature sensor. This provides a simple inexpensive way to improve theefficiency of your irrigation.As with the full weather station, programs can be selectively included orexcluded from being controlled by the ET values.T...

Allows the pump to be controlled within a program. The pump start has an On serial Number and an Off serial number. Whenever these serial numbers are encountered in a program the pump will switch on or off. Also, if the pump decoder loses 30V then it will also switch off.It has a 30mm isolation betw...

The a versatile and intuitive battery-powered irrigation solution, available in two sizes, 8 and 16 valve outputs. It is designed to operate 9-24V DC latching solenoid valves, making it a powerful option for locations where mains power is unavailable.With a menu-driven interface, users can easily co...

The Ethernet Line Driver is an optically isolated line driver to connect Mi or Ti irrigation controllers to an Ethernet LAN. The line driver can extend the Ethernet LAN connection by up to 500 meters. The Ethernet Line Driver (Version A) is designed to work with the Ground Control software.

The "FILTRON 1-10" is a modular backflushing controller for automatic filters of 1 to 10 stations.The DC model can be powered either by 6V DC or 12V DC and it activates 2 wired 12V DC latching solenoids. The voltage for the solenoids switching is boosted by a charge pump.Flushing cycles may be trigg...

- Choose between 8 and 12 stations- AC Controller- Heron's controllers are menu driven, making them intuitive and easy to use. To simplify the creation of irrigation programs, valves can be individually named.- You can specify the number of programs, the type and number of automatic starts needed. ...

The Heron HM8 AC Multi-Wire Controller is an intuitive and feature-rich irrigation solution, designed to provide precise control over up to 8 stations. This AC-powered controller is engineered for professional irrigation management, making it ideal for golf courses, sports fields, commercial landsca...

The Heron HM16 Pro Multi-Wire Controller is a powerful and feature-rich AC-powered irrigation system designed for precision water management. Supporting up to 16 stations, this controller is ideal for large-scale irrigation applications, including golf courses, commercial landscapes, and agricultura...

Heron 2-wire irrigation controllers and decoders offer an unparalleled level of protection against lightning and electrical surges. - Operate up to 240 valves- Run up to 60 irrigation programs- Set up to 64 daily or weekly automatic starts- Run up to 4 valves (1 Amp) in parallel as standard (up to 1...

The Heron pipe sensor is designed for measurement of pipe temperature for Greenhouse hot water temperature control. The sensor is mounted external to the pipe with a jubilee clip. The pipe sensor is designed to work with the Heron range of Environmental controllers.Maximum Pipe Temperature: 85 degrees CelsiusMinimum Pipe Temperature: 0 degrees CelsiusPipe Radius: 30-90mm

The basic relay will close a relay contact whenever there is 30V on the two-wire cable. This is supplied as a DIN rail mounting module. A maximum of 100 pump start modules can be fitted.Output: 240V contact rated at 0.6ANote: Not recommended for areas with high incidence of lightning

The basic relay will close a relay contact whenever there is 30V on the two-wire cable. This is supplied in an enclosure. A maximum of 100 pump start modules can be fitted.Output: 240V contact rated at 0.6ANote: Not recommended for areas with high incidence of lightning

The Heron Weather Station interface board allows one or more Heron Digital sensors to be connected to a Mi or Ti irrigation controller or to a Heron environmental controller. This pack includes the interface and temperature sensor (with mount).

The Ethernet Line Driver is an optically isolated line driver to connect Mi or Ti irrigation controllers to an Ethernet LAN. The line driver can extend the Ethernet LAN connection by up to 500 meters. The Ethernet Line Driver (Version B) is designed to work with the Heron Server.By default, the Ethe...

The Input Expansion Card is designed to increase the number of remote inputs for a Mi or Ti controller.The input board can be used to increase the number of switched inputs (e.g. remote starts) or to add Heron sensors (e.g. moisture sensor). The switched inputs are optically isolated, and the switch...

Measure the rainfall at your location to save water by automatically reducing your program run times. This tipping spoon type rain sensor is accurate to 1mm of rain fall.When your Heron controller is connected to a rain gauge you will be able to reduce programs’ run times by 25%, 50%, 75% or 100% ...

- Electronic over load cut out- Surge protection- Usually two per system