Pineline 1 views Claim this Business

Small batch, handmade Surfboard Fins designed and manufactured in Papamoa, New Zealand
1 to 7
AA •
×
  • 10" The George - Apricot - Glass On
    $129 +
    10" The George - Apricot - Glass On
    Rough sanded to a 60 grit finish to allow for a seamless bond to your board.A nod to the iconic George Greenough template with a little additional flare. This fin has a generous base for drive and a fine turned foil to improve manoeuvrability.Please note:We recommend wiping down and blowing off any ...
    Buy from Store 0 0
  • 10" Sweeper - Glass On - Clear/Raw
    $129 +
    10" Sweeper - Glass On - Clear/Raw
    Rough sanded to a 60 grit finish to allow for a seamless bond to your board.Manoeuvrability is at the forefront of this design. A long sweeping (surprise surprise) curve, wide base and slim flexible tip provide smooth responsive turns and superior hold.Please note:We recommend wiping down and blowin...
    Buy from Store 0 0
  • 10" The George - Yellow - Glass On
    $129 +
    10" The George - Yellow - Glass On
    Rough sanded to a 60 grit finish to allow for a seamless bond to your board.A nod to the iconic George Greenough template with a little additional flare. This fin has a generous base for drive and a fine turned foil to improve manoeuvrability.Please note:We recommend wiping down and blowing off any ...
    Buy from Store 0 0
  • 10" The George - Clear/Raw - Glass On
    $129 +
    10" The George - Clear/Raw - Glass On
    Rough sanded to a 60 grit finish to allow for a seamless bond to your board.A nod to the iconic George Greenough template with a little additional flare. This fin has a generous base for drive and a fine turned foil to improve manoeuvrability.Please note:We recommend wiping down and blowing off any ...
    Buy from Store 0 0
  • Glass On Keels
    $110 +
    Glass On Keels
    Rough finished to 60 grit, these fins are ready to hand to your shaper or keep for that board you're shaping in the back shed.
    Buy from Store 0 0
  • Bonzer Runners (4) - Glass-on
    $120 +
    Bonzer Runners (4) - Glass-on
    Glass-on Bonzer sides for the Bonzer5 setup. The runners come in a set of four. This is the perfect complement to the MM Bonzer fin.Rough finished to 60 grit, these fins are ready to hand to your shaper or keep for that board you're shaping in the back shed.( Front Fins )Height: 58 mmBase: 115 mm( Back Fins )Height: 70 mmBase: 130 mm
    Buy from Store 0 0
  • Bonzer Runners
    $80 +
    Bonzer Runners
    Set of 10.0" of the original Campbell Brothers template.
    Buy from Store 0 0
×